[PVE-User] more subnet on same bridge

[Eneko Lacunza]

Hi,

Just setting the right routes in the VMs should work, ie (asuming eth0
is the virtual network interface)

route add -net 192.168.0.0/24 dev eth0
route add -net 172.16.0.0/24 dev eth0

El jue, 29-03-2012 a las 10:12 +0200, Marco Vaschetto escribió:

> anybody have try to configure different subnet on the same bridge
> between two node?
> 
>  
> 
> For example, 
> 
>  
> 
> on the two server node vmbr1 is setup without any ip and is working  
> 
>  
> 
> VM 1 - IP 192.168.0.1 - server node A 
> 
> VM2 - IP 192.168.0.2 - server node B
> 
> VM3 - IP 172.16.0.1 - server node A
> 
> VM4 - IP 172.16.0.2 - server node B
> 
>  
> 
> All VM's the virtual ETH setup with  on vmbr1.
> 
>  
> 
> I think this will work fine, if somebody had try to do it and want to
> give me some feedback will really appreciate;
> 
>  
> 
> Now I’m going to set up and test this scenario, if nobody provide a
> feedback, I will do it; but I’m sure 90% this will work.
> 
>  
> 
> Regards Marco Vaschetto
> 
> 
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

-- 
Zuzendari Teknikoa / Director Técnico
Binovo IT Human Project, S.L.
Telf. 943575997
      943493611
Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa)
www.binovo.es