[PVE-User] VM crash down after fence...

Gilberto Nunes gilberto.nunes32 at gmail.com
Sun Jul 29 18:34:38 CEST 2012


Now is the most strange behavior...

http://pastebin.com/ma7sH2tD

When I power on the crash node, the VM start on node 2, where previoulsy
has die...



2012/7/29 Gilberto Nunes <gilberto.nunes32 at gmail.com>

> Here what's happen:
>
> http://troll.ws/A2nH35
>
> http://troll.ws/A6etIQ
>
> On first screen, we see that I can have /dev/VM anymore...
> On second, the VM has shutdown state on "alive" node.... :(
>
> And just happen on feel seconds after the other node die...
>
> That syslog on "alived" node:
>
> /var/log/syslog
> Jul 29 13:23:44 servidor-b task
> UPID:servidor-b:00000C3E:0000EC40:50156390:qmstart:100:root at pam:: start
> VM 100: UPID:servidor-b:00000C3E:0000EC40:50156390:qmstart:100:root at pam:
> Jul 29 13:23:44 servidor-b pvevm: <root at pam> starting task
> UPID:servidor-b:00000C3E:0000EC40:50156390:qmstart:100:root at pam:
> Jul 29 13:23:45 servidor-b kernel: device tap100i0 entered promiscuous mode
> Jul 29 13:23:45 servidor-b rgmanager[3150]: [pvevm] Task still active,
> waiting
> Jul 29 13:23:45 servidor-b kernel: vmbr0: port 2(tap100i0) entering
> forwarding state
> Jul 29 13:23:45 servidor-b kernel: New device tap100i0 does not support
> netpoll
> Jul 29 13:23:45 servidor-b kernel: Disabling netpoll for vmbr0
> Jul 29 13:23:45 servidor-b pvevm: <root at pam> end task
> UPID:servidor-b:00000C3E:0000EC40:50156390:qmstart:100:root at pam: OK
> Jul 29 13:23:45 servidor-b rgmanager[1787]: Service pvevm:100 started
> Jul 29 13:23:55 servidor-b kernel: tap100i0: no IPv6 routers present
> Jul 29 13:24:00 servidor-b ntpd[1252]: Listen normally on 15 tap100i0
> fe80::e097:e8ff:feca:a9a6 UDP 123
> Jul 29 13:24:12 servidor-b pmxcfs[1350]: [dcdb] notice: members: 2/1350
> Jul 29 13:24:12 servidor-b pmxcfs[1350]: [dcdb] notice: members: 2/1350
> Jul 29 13:24:22 servidor-b rgmanager[3238]: [pvevm] VM 100 is running
> Jul 29 13:24:24 servidor-b kernel: bnx2 0000:07:00.0: eth1: NIC Copper
> Link is Down
> Jul 29 13:24:24 servidor-b kernel: vmbr1: port 1(eth1) entering disabled
> state
> Jul 29 13:24:25 servidor-b kernel: bnx2 0000:07:00.0: eth1: NIC Copper
> Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
> Jul 29 13:24:25 servidor-b kernel: vmbr1: port 1(eth1) entering forwarding
> state
> Jul 29 13:24:32 servidor-b kernel: block drbd0: PingAck did not arrive in
> time.
> Jul 29 13:24:32 servidor-b kernel: block drbd0: peer( Primary -> Unknown )
> conn( Connected -> NetworkFailure ) pdsk( UpToDate -> DUnknown )
> Jul 29 13:24:32 servidor-b kernel: block drbd0: new current UUID
> 9DF628A28D5AF19F:693299C3FBC55B03:F7D75A97A0DFB737:F7D65A97A0DFB737
> Jul 29 13:24:32 servidor-b kernel: block drbd0: asender terminated
> Jul 29 13:24:32 servidor-b kernel: block drbd0: Terminating asender thread
> Jul 29 13:24:32 servidor-b kernel: block drbd0: Connection closed
> Jul 29 13:24:32 servidor-b kernel: block drbd0: conn( NetworkFailure ->
> Unconnected )
> Jul 29 13:24:32 servidor-b kernel: block drbd0: receiver terminated
> Jul 29 13:24:32 servidor-b kernel: block drbd0: Restarting receiver thread
> Jul 29 13:24:32 servidor-b kernel: block drbd0: receiver (re)started
> Jul 29 13:24:32 servidor-b kernel: block drbd0: conn( Unconnected ->
> WFConnection )
> Jul 29 13:24:32 servidor-b corosync[1571]:   [TOTEM ] A processor failed,
> forming new configuration.
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] CLM CONFIGURATION
> CHANGE
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] New Configuration:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] #011r(0)
> ip(10.0.0.20)
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] Members Left:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] #011r(0)
> ip(10.0.0.10)
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] Members Joined:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CMAN  ] quorum lost,
> blocking activity
> Jul 29 13:24:34 servidor-b corosync[1571]:   [QUORUM] This node is within
> the non-primary component and will NOT provide any services.
> Jul 29 13:24:34 servidor-b corosync[1571]:   [QUORUM] Members[1]: 2
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] CLM CONFIGURATION
> CHANGE
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] New Configuration:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] #011r(0)
> ip(10.0.0.20)
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] Members Left:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CLM   ] Members Joined:
> Jul 29 13:24:34 servidor-b corosync[1571]:   [TOTEM ] A processor joined
> or left the membership and a new membership was formed.
> Jul 29 13:24:34 servidor-b pmxcfs[1350]: [status] notice: node lost quorum
> Jul 29 13:24:34 servidor-b dlm_controld[1653]: node_history_cluster_remove
> no nodeid 1
> Jul 29 13:24:34 servidor-b corosync[1571]:   [CPG   ] chosen downlist:
> sender r(0) ip(10.0.0.20) ; members(old:2 left:1)
> Jul 29 13:24:34 servidor-b corosync[1571]:   [MAIN  ] Completed service
> synchronization, ready to provide service.
> Jul 29 13:24:34 servidor-b rgmanager[1787]: #1: Quorum Dissolved
>
> Message from syslogd at servidor-b at Jul 29 13:24:34 ...
>  rgmanager[1787]: #1: Quorum Dissolved
> Jul 29 13:24:34 servidor-b kernel: dlm: closing connection to node 1
> Jul 29 13:24:34 servidor-b task
> UPID:servidor-b:00000CC8:00010015:501563C2:qmshutdown:100:root at pam::
> shutdown VM 100:
> UPID:servidor-b:00000CC8:00010015:501563C2:qmshutdown:100:root at pam:
> Jul 29 13:24:34 servidor-b pvevm: <root at pam> starting task
> UPID:servidor-b:00000CC8:00010015:501563C2:qmshutdown:100:root at pam:
> Jul 29 13:24:35 servidor-b rgmanager[3274]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:37 servidor-b rgmanager[3294]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:38 servidor-b rgmanager[3314]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:39 servidor-b rgmanager[3334]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:40 servidor-b rgmanager[3354]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:41 servidor-b rgmanager[3374]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:42 servidor-b rgmanager[3394]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:43 servidor-b rgmanager[3419]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:44 servidor-b kernel: vmbr0: port 2(tap100i0) entering
> disabled state
> Jul 29 13:24:44 servidor-b kernel: vmbr0: port 2(tap100i0) entering
> disabled state
> Jul 29 13:24:44 servidor-b rgmanager[3446]: [pvevm] Task still active,
> waiting
> Jul 29 13:24:45 servidor-b pvevm: <root at pam> end task
> UPID:servidor-b:00000CC8:00010015:501563C2:qmshutdown:100:root at pam: OK
>
>
> 2012/7/29 Gilberto Nunes <gilberto.nunes32 at gmail.com>
>
>> Other question:
>>
>> Do I need run command pvecm expected 1 on both nodes??
>>
>>
>> 2012/7/29 Gilberto Nunes <gilberto.nunes32 at gmail.com>
>>
>>> It's seems to me, that quorum is already set:
>>>
>>>
>>> server-a:~# pvecm status
>>> Version: 6.2.0
>>> Config Version: 12
>>> Cluster Name: SELB
>>> Cluster Id: 1158
>>> Cluster Member: Yes
>>> Cluster Generation: 204
>>> Membership state: Cluster-Member
>>> Nodes: 2
>>> Expected votes: 1
>>> Total votes: 2
>>> Node votes: 1
>>> Quorum: 2
>>> Active subsystems: 6
>>> Flags:
>>> Ports Bound: 0 177
>>> Node name: servidor-a
>>> Node ID: 1
>>> Multicast addresses: 239.192.4.138
>>> Node addresses: 10.0.0.10
>>>
>>> May I need other disk to make the quorum, right is mentioned on that
>>> docs that I send on previously mail??
>>>
>>>
>>> 2012/7/29 THe_ZiPMaN <flavio-pve at zipman.it>
>>>
>>>> On 07/29/2012 05:55 PM, Gilberto Nunes wrote:
>>>> > And to complete my hell, I'm unable to migrate the VM to server-b to
>>>> > server-a
>>>> >
>>>> > Executing HA migrate for VM 100 to node servidor-a
>>>> > Trying to migrate pvevm:100 to servidor-a...Failure
>>>> > TASK ERROR: command 'clusvcadm -M pvevm:100 -m servidor-a' failed:
>>>> exit
>>>> > code 255
>>>>
>>>> If you have a 2 node cluster you must set the quorum to 1 or the cluster
>>>> won't service anything.
>>>>
>>>> You must set the quorum to 1 by hand
>>>> # pvecm expected 1
>>>>
>>>> What's your cluster status on the 2 nodes?
>>>> # pvecm status
>>>>
>>>> --
>>>> Flavio Visentin
>>>>
>>>> A computer is like an air conditioner,
>>>> it stops working when you open Windows
>>>> _______________________________________________
>>>> pve-user mailing list
>>>> pve-user at pve.proxmox.com
>>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>>
>>>
>>>
>>>
>>> --
>>> Gilberto Nunes
>>>
>>>
>>> (47) 9676-7530
>>>
>>> msn: gilbertonunesferreira at hotmail.com
>>>
>>> msn: konnectati at konnectati.com.br
>>>
>>> Skype: gilberto.nunes36
>>>
>>> Skype: konnectati
>>>
>>>
>>> *www.konnectati.com.br*
>>>
>>>
>>
>>
>> --
>> Gilberto Nunes
>>
>>
>> (47) 9676-7530
>>
>> msn: gilbertonunesferreira at hotmail.com
>>
>> msn: konnectati at konnectati.com.br
>>
>> Skype: gilberto.nunes36
>>
>> Skype: konnectati
>>
>>
>> *www.konnectati.com.br*
>>
>>
>
>
> --
> Gilberto Nunes
>
>
> (47) 9676-7530
>
> msn: gilbertonunesferreira at hotmail.com
>
> msn: konnectati at konnectati.com.br
>
> Skype: gilberto.nunes36
>
> Skype: konnectati
>
>
> *www.konnectati.com.br*
>
>


-- 
Gilberto Nunes


(47) 9676-7530

msn: gilbertonunesferreira at hotmail.com

msn: konnectati at konnectati.com.br

Skype: gilberto.nunes36

Skype: konnectati


*www.konnectati.com.br*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pve.proxmox.com/pipermail/pve-user/attachments/20120729/ab172228/attachment-0014.html>


More information about the pve-user mailing list