[PVE-User] VM crash down after fence...

[Gilberto Nunes]

As additional information, I found this on syslog....

Jul 29 12:30:00 servidor-b kernel: block drbd0: receiver (re)started
Jul 29 12:30:00 servidor-b kernel: block drbd0: conn( Unconnected ->
WFConnection )
Jul 29 12:30:00 servidor-b corosync[1558]:   [TOTEM ] A processor failed,
forming new configuration.
Jul 29 12:30:02 servidor-b pmxcfs[1315]: [status] notice: node lost quorum
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] CLM CONFIGURATION
CHANGE
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] New Configuration:
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] #011r(0)
ip(10.0.0.20)
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] Members Left:
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] #011r(0)
ip(10.0.0.10)
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] Members Joined:
Jul 29 12:30:02 servidor-b corosync[1558]:   [CMAN  ] quorum lost, blocking
activity
Jul 29 12:30:02 servidor-b corosync[1558]:   [QUORUM] This node is within
the non-primary component and will NOT provide any services.
Jul 29 12:30:02 servidor-b corosync[1558]:   [QUORUM] Members[1]: 2
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] CLM CONFIGURATION
CHANGE
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] New Configuration:
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] #011r(0)
ip(10.0.0.20)
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] Members Left:
Jul 29 12:30:02 servidor-b corosync[1558]:   [CLM   ] Members Joined:
Jul 29 12:30:02 servidor-b corosync[1558]:   [TOTEM ] A processor joined or
left the membership and a new membership was formed.
Jul 29 12:30:02 servidor-b rgmanager[1790]: #1: Quorum Dissolved
Jul 29 12:30:02 servidor-b corosync[1558]:   [CPG   ] chosen downlist:
sender r(0) ip(10.0.0.20) ; members(old:2 left:1)
Jul 29 12:30:02 servidor-b corosync[1558]:   [MAIN  ] Completed service
synchronization, ready to provide service.


I do not know how can I fix that...

Please, help me....

Thanks again



2012/7/29 Gilberto Nunes <gilberto.nunes32 at gmail.com>

> In this howto,
> http://pve.proxmox.com/wiki/Two-Node_High_Availability_Cluster#Quorum_Disk_Configuration,
> the author was make mencion in some disk to make quorum...
>
> I'm really need this???
>
> Before the section show above, the author show same test with fence and
> seems to work ok....
>
> Please somebody help with this....
>
> Thanks....
>
> 2012/7/29 Gilberto Nunes <gilberto.nunes32 at gmail.com>
>
>> Hi...
>>
>> Finally, I was able to deploy a two-node with PVE 2.1, DRBD, LVM and a
>> IPMI Fence, provide by BMC Dell Poweredge....
>>
>> I have to server, that I named server-a and server-b...
>> The VM runs on server-a and everything seems work properly...
>>
>> However, when I shutting down server-a the VM is really started on
>> server-b, but a feels seconds before that, the VM was shutdown by HA on
>> server-b..
>>
>> My VM was installed on /dev/VM/vm-100-disk-1...
>>
>> So, in that moment, DRBD lose the syncronize from other side.... And I
>> see the /dev/VM/vm-100-disk-1 doesn't exist anymore...
>> That the reason of the VM going to down state....
>>
>> My simple question is: why this behavior happens???
>>
>> Any idea will welcome....
>>
>> Thanks
>>
>> --
>> Gilberto Nunes
>>
>>
>> (47) 9676-7530
>>
>> msn: gilbertonunesferreira at hotmail.com
>>
>> msn: konnectati at konnectati.com.br
>>
>> Skype: gilberto.nunes36
>>
>> Skype: konnectati
>>
>>
>> *www.konnectati.com.br*
>>
>>
>
>
> --
> Gilberto Nunes
>
>
> (47) 9676-7530
>
> msn: gilbertonunesferreira at hotmail.com
>
> msn: konnectati at konnectati.com.br
>
> Skype: gilberto.nunes36
>
> Skype: konnectati
>
>
> *www.konnectati.com.br*
>
>


-- 
Gilberto Nunes


(47) 9676-7530

msn: gilbertonunesferreira at hotmail.com

msn: konnectati at konnectati.com.br

Skype: gilberto.nunes36

Skype: konnectati


*www.konnectati.com.br*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20120729/899787e7/attachment.htm>