[PVE-User] R: R: config validation failed: unknown error (500) when try to activate
Marco Vaschetto
m.vaschetto at snservice.net
Sat Feb 25 00:46:02 CET 2012
I finally discovered where it was my mistake
<?xml version="1.0"?>
<cluster name="cluster" config_version="4">
<cman keyfile="/var/lib/pve-cluster/corosync.authkey" two_node="1"
expected_votes="1">
</cman>
<clusternodes>
<clusternode name="LSA000AE01" votes="1" nodeid="1">
<fence>
<method name="1">
<device name="fenceNodeA" action="reboot"/>
</method>
</fence>
</clusternode>
<clusternode name="LSA000AE02" votes="1" nodeid="2">
<fence>
<method name="1">
<device name="fenceNodeB" action="reboot"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice name="fenceNodeA" agent="fence_ipmilan" ipaddr="ILO01"
auth="password" login="admin" passwd="admin"/>
<fencedevice name="fenceNodeB" agent="fence_ipmilan" ipaddr="ILO02"
auth="password" login="admin" passwd="admin"/>
</fencedevices>
</cluster>
I hope will helpful to some bady for use HP LO100 as fencedevice.
Marco Vaschetto
Da: pve-user-bounces at pve.proxmox.com
[mailto:pve-user-bounces at pve.proxmox.com] Per conto di Marco Vaschetto
Inviato: venerdì 24 febbraio 2012 22:21
A: 'Rob wylde'; pve-user at pve.proxmox.com
Oggetto: [PVE-User] R: config validation failed: unknown error (500) when
try to activate
Yes, but any way got no change;
whit the options work fine whit the stdin parameters not.
root at LSA000AE01:/etc/pve# fence_ipmilan hostname="ILO02" login="admin"
passwd="admin"
failed: no IP address specified
root at LSA000AE01:/etc/pve# fence_ipmilan ipaddr="50.7.230.61" login="admin"
passwd="admin"
failed: no IP address specified
root at LSA000AE01:/etc/pve# fence_ipmilan -a ILO02 -l admin -p admin -o
status
Getting status of IPMI:ILO02...Chassis power = On
Done
root at LSA000AE01:/etc/pve# fence_ipmilan -a 50.7.230.61 -l admin -p admin -o
status
Getting status of IPMI:50.7.230.61...Chassis power = On
Done
Da: Rob wylde [mailto:wylde780 at gmail.com]
Inviato: venerdì 24 febbraio 2012 22:00
A: Marco Vaschetto; pve-user at pve.proxmox.com
Oggetto: Re: [PVE-User] config validation failed: unknown error (500) when
try to activate
But have you considered fence_ipmilan ipaddr="ILO02" .. that it may
EXPECT and IP ADDRESS instead of a short hostname ?
Just throwing that out there
On Fri, Feb 24, 2012 at 1:59 PM, Rob wylde <wylde780 at gmail.com> wrote:
On Fri, Feb 24, 2012 at 12:50 PM, Marco Vaschetto
<m.vaschetto at snservice.net> wrote:
Hi to all,
I got this issue when i try to activate the cluster.conf.new
My cluster is two ML150 G5 whit LO100
The cluster.conf.new:
<?xml version="1.0"?>
<cluster name="cluster" config_version="4">
<cman keyfile="/var/lib/pve-cluster/corosync.authkey" two_node="1"
expected_votes="1">
</cman>
<clusternodes>
<clusternode name="LSA000AE01" votes="1" nodeid="1"/>
<clusternode name="LSA000AE02" votes="1" nodeid="2"/></clusternodes>
<fencedevices>
<fencedevice agent="fence_ipmilan" ipaddr="ILO01" login="admin"
name="fenceNodeA" passwd="admin"/>
<fencedevice agent="fence_ipmilan" ipaddr="ILO02" login="admin"
name="fenceNodeB" passwd="admin"/>
</fencedevices>
<clusternode name="LSA000AE01.SUPERNET.LOCAL" nodeid="1" votes="1">
<fence>
<method name="1">
<device name="fenceNodeA" action="reboot"/>
</method>
</fence>
</clusternode>
<clusternode name="LSA000AE02.SUPERNET.LOCAL" nodeid="2" votes="1">
<fence>
<method name="1">
<device name="fenceNodeB" action="reboot"/>
</method>
</fence>
</clusternode>
</cluster>
When I try to run fence_ipmilan whit the sintax of cluster.conf file frome
bash:
root at LSA000AE01:/etc/pve# fence_ipmilan ipaddr="ILO02" login="admin"
name="fenceNodeA" passwd="admin"
failed: no IP address specified
when I try to run the same comand but whit the shotcurt sintax
root at LSA000AE01:/etc/pve# fence_ipmilan -a ILO02 -l admin -p admin -o
status (I put –o status for not shutdown the server)
Getting status of IPMI:ILO02...Chassis power = On
Done
I try to run :
root at LSA000AE01:/etc/pve# ccs_config_validate -v -f cluster.conf.new
Creating temporary file: /tmp/tmp.jQJzJQ2LHf
Config interface set to:
Configuration stored in temporary file
Updating relaxng schema
Validating..
Relax-NG validity error : Extra element fencedevices in interleave
tempfile:10: element fencedevices: Relax-NG validity error : Element cluster
failed to validate content
Configuration fails to validate
Validation completed
The version of pve:
root at LSA000AE01:/etc/pve# pveversion -v
pve-manager: 2.0-33 (pve-manager/2.0/c598d9e1)
running kernel: 2.6.32-7-pve
proxmox-ve-2.6.32: 2.0-60
pve-kernel-2.6.32-6-pve: 2.6.32-55
pve-kernel-2.6.32-7-pve: 2.6.32-60
lvm2: 2.02.88-2pve1
clvm: 2.02.88-2pve1
corosync-pve: 1.4.1-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-1
pve-cluster: 1.0-23
qemu-server: 2.0-20
pve-firmware: 1.0-15
libpve-common-perl: 1.0-14
libpve-access-control: 1.0-16
libpve-storage-perl: 2.0-12
vncterm: 1.0-2
vzctl: 3.0.30-2pve1
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-4
ksm-control-daemon: 1.1-1
For got more inforation but i didn’t understand whats wrong, any suggestioni
is really appreciate
Best regard Marco Vaschetto
_______________________________________________
pve-user mailing list
pve-user at pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20120225/aa42b88c/attachment.htm>
More information about the pve-user
mailing list