[PVE-User] WG: ProxMox-1.9- does not boot on HP P410

[Frank, Petric (Petric)]

Hello,

i am not sure, but in the more recent kernels the kernel module hpsa (instead of cciss) is loaded to support the HP Smart Array devices.

If this is the case here your devices will read
  /dev/sda1

instead of
  /dev/cciss/c0d0p1

Changing grub entry and fstab to reflect this entry should do it. I don't know if and how the LVM config have to be adapted.

kind regards
  Petric


________________________________
From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-bounces at pve.proxmox.com] On Behalf Of Holger Ernst
Sent: Mittwoch, 22. Februar 2012 15:59
To: pve-user at pve.proxmox.com
Subject: [PVE-User] WG: ProxMox-1.9- does not boot on HP P410

Update: It is definitely the kernel or initrd. If I boot kernel-2.6.32-4-pve everything is fine. When booting 2.6.32-7-pve it does not create the device /dev/cciss/c0d0p1 which is /boot.

Holger
- -----------------------------------
Hi,

I tried to install a Proxmox 1.9 Kernel 2.6.32 on a fresh Debian 5 install on a HP DL180 G6 using P410 raid controller. After installing the kernel the machine does not reboot any more (hangs directly after grub menu). Booting with debian kernel is possible.

Boot device in grub is /dev/cciss/c0d0p1 which seems to be correct. Is the raid driver modul missing in the initrd?

Regards, Holger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20120222/79b66c4e/attachment.htm>