[PVE-User] vzdump.conf settings not taken into account

[Martin Maurer]

Hi,

Provide a pveperf of your raid1 (if you use a filesystem on that, pveperf does not work for block devices/LVM).

> pveperf /path

Martin

> -----Original Message-----
> From: pve-user-bounces at pve.proxmox.com [mailto:pve-user-
> bounces at pve.proxmox.com] On Behalf Of Laurent CARON
> Sent: Dienstag, 21. Februar 2012 09:54
> To: pve-user at pve.proxmox.com
> Subject: Re: [PVE-User] vzdump.conf settings not taken into account
> 
> On 21/02/2012 09:50, Martin Maurer wrote:
> > Hi,
> >
> > You cannot increase the speed just with this setting - as your environment
> performance is below the specified vzdump limit you do not see any result.
> > Use 5000 and you will see that its slower.
> >
> > To get a faster system, find the bottleneck in your IO. A good start is using a
> fast hardware raid controller - your fsyncs/sec are much too low, you should
> get 1000 or higher here.
> 
> Hi Martin,
> 
> /dev/md0 is the array where the OS resides. My VMs are on a RAID1 array
> (SSD) with BBWC.
> 
> > Btw, you software packages are outdated, upgrade to latest.
> 
> I'm waiting for a maintenance window to do so.
> 
> Thanks
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user