[PVE-User] Load modules into the VPS

Maykel Franco Hernández maykel at maykel.sytes.net
Mon Apr 16 18:20:27 CEST 2012


 

Thanks very much. I probed tomorrow. 

Thanks again. 

El 2012-04-16
17:54, Timh B escribió: 

> Hi,
> 
> Usually loading the modules on the
hardware node is enough, in some cases
> you might need "vzctl set--save
--capability net_admin:on" if it
> does anything special with the
network devices. I've only found this
> useful for doing DHCP/PXE so far
though. In some rare cases you might want
> to restart openvz after
you've added modules to the hardware node;
> /etc/init.d/vz restart.
>

> Good luck!
> 
> BR,
> Timh
> 
> On Mon, April 16, 2012 17:25, Maykel
Franco Hernández wrote:
> 
>> Hi!! Before I tell everything,
Congratulations for PROXMOX 2.0. I installed the proxmox and I test this
tool. All OK, but I created the container ubuntu 10.04 and I need load
the modules for the loadbalancing in this VPS container ubuntu.:
modprobe ip_vs_dh modprobe ip_vs_ftp modprobe ip_vs modprobe ip_vs_lblc
modprobe ip_vs_lblcr modprobe ip_vs_lc modprobe ip_vs_nq modprobe
ip_vs_rr modprobe ip_vs_sed modprobe ip_vs_sh modprobe ip_vs_wlc
modprobe ip_vs_wrr # modprobe ip_vs_dh WARNING: Deprecated config file
/etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Module ip_vs_dh not found. But in the proxmox the modules are
loaded successfull: For example: root at proxmox1:~# modprobe ip_vs_dh
root at proxmox1:~# lsmod | grep ip nf_conntrack_ipv4 9946 2 nf_nat
nf_conntrack 80789 3 vzrst,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1531
1 nf_conntrack_ipv4 ip6t_REJECT 4743 0 ip6table_mangle 3637 0
ip6table_filter 3001 0 ip6_tables 19714 2
ip6table_mangle,ip6table_filter iptable_mangle 3461 0 iptable_filter
2905 0 xt_multiport 2812 0 ipt_REJECT 2431 0 ip_tables 18151 2
iptable_mangle,iptable_filter ip_vs_wrr 2291 0 ip_vs_wlc 1257 0 ip_vs_sh
2061 0 ip_vs_sed 1257 0 ip_vs_rr 1436 0 ip_vs_nq 1222 0 ip_vs_lc 1190 0
ip_vs_lblcr 5735 0 ip_vs_lblc 4235 0 ip_vs_ftp 3626 0 ip_vs_dh 1997 0
ip_vs 108414 22
ip_vs_wrr,ip_vs_wlc,ip_vs_sh,ip_vs_sed,ip_vs_rr,ip_vs_nq,ip_vs_lc,ip_vs_lblcr,ip_vs_lblc,ip_vs_ftp,ip_vs_dh
ipv6 326645 333 vzrst,ip6t_REJECT,ip6table_mangle,ib_addr,ip_vs I found
in google what the modules are loaded in proxmox, not a VPS. And from
proxmox share this modules in the VPS openvz. I found in google this
example: vzctl set 101 --iptables iptable_filter --iptables ipt_length
--iptables ipt_limit --iptables iptable_mangle --iptables ipt_REJECT
--save But I need load the modules ip_vs....... Can I help me please??
_______________________________________________ pve-user mailing list
pve-user at pve.proxmox.com [1]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user [2]
> 
> --
Timh

 

Links:
------
[1] mailto:pve-user at pve.proxmox.com
[2]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pve.proxmox.com/pipermail/pve-user/attachments/20120416/16d9e186/attachment-0014.html>


More information about the pve-user mailing list