[PVE-User] Load modules into the VPS

[Timh B]

Hi,

Usually loading the modules on the hardware node is enough, in some cases
you might need "vzctl set <vmid> --save --capability net_admin:on" if it
does anything special with the network devices. I've only found this
useful for doing DHCP/PXE so far though. In some rare cases you might want
to restart openvz after you've added modules to the hardware node;
/etc/init.d/vz restart.

Good luck!

BR,
Timh

On Mon, April 16, 2012 17:25, Maykel Franco Hernández wrote:
>
>
> Hi!! Before I tell everything, Congratulations for PROXMOX 2.0.
>
> I
> installed the proxmox and I test this tool. All OK, but I created the
> container ubuntu 10.04 and I need load the modules for the loadbalancing
> in this VPS container ubuntu.:
>
> modprobe ip_vs_dh
> modprobe
> ip_vs_ftp
> modprobe ip_vs
> modprobe ip_vs_lblc
> modprobe
> ip_vs_lblcr
> modprobe ip_vs_lc
> modprobe ip_vs_nq
> modprobe
> ip_vs_rr
> modprobe ip_vs_sed
> modprobe ip_vs_sh
> modprobe
> ip_vs_wlc
> modprobe ip_vs_wrr
>
> # modprobe ip_vs_dh
>
> WARNING: Deprecated
> config file /etc/modprobe.conf, all config files belong into
> /etc/modprobe.d/.
> FATAL: Module ip_vs_dh not found.
>
> But in the proxmox
> the modules are loaded successfull:
>
> For example:
>
> root at proxmox1:~#
> modprobe ip_vs_dh
>
> root at proxmox1:~# lsmod | grep ip
> nf_conntrack_ipv4
> 9946 2 nf_nat
> nf_conntrack 80789 3
> vzrst,nf_nat,nf_conntrack_ipv4
> nf_defrag_ipv4 1531 1
> nf_conntrack_ipv4
> ip6t_REJECT 4743 0
> ip6table_mangle 3637 0
>
> ip6table_filter 3001 0
> ip6_tables 19714 2
> ip6table_mangle,ip6table_filter
> iptable_mangle 3461 0
> iptable_filter
> 2905 0
> xt_multiport 2812 0
> ipt_REJECT 2431 0
> ip_tables 18151 2
> iptable_mangle,iptable_filter
> ip_vs_wrr 2291 0
> ip_vs_wlc 1257 0
>
> ip_vs_sh 2061 0
> ip_vs_sed 1257 0
> ip_vs_rr 1436 0
> ip_vs_nq 1222 0
>
> ip_vs_lc 1190 0
> ip_vs_lblcr 5735 0
> ip_vs_lblc 4235 0
> ip_vs_ftp 3626
> 0
> ip_vs_dh 1997 0
> ip_vs 108414 22
> ip_vs_wrr,ip_vs_wlc,ip_vs_sh,ip_vs_sed,ip_vs_rr,ip_vs_nq,ip_vs_lc,ip_vs_lblcr,ip_vs_lblc,ip_vs_ftp,ip_vs_dh
> ipv6
> 326645 333 vzrst,ip6t_REJECT,ip6table_mangle,ib_addr,ip_vs
>
> I found in
> google what the modules are loaded in proxmox, not a VPS. And from
> proxmox share this modules in the VPS openvz.
>
> I found in google this
> example:
>
> vzctl set 101 --iptables iptable_filter --iptables ipt_length
> --iptables ipt_limit --iptables iptable_mangle --iptables ipt_REJECT
> --save
>
> But I need load the modules ip_vs.......
>
> Can I help me
> please??
>
>  _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>


-- Timh