[PVE-User] pve-user Digest, Vol 41, Issue 4

[CoolCold]

On Mon, Aug 8, 2011 at 1:52 PM, Erik van Ast <Erik.van.Ast at suzohapp.nl> wrote:
> Hi all,
>
> @Fabian and @CoolCold thank you for your reply.
> I have connected with putty (SSH) and ran #top.
> I see 4 CPU lines (CPU0-CPU4) and the max I have seen now during 5
> minutes of watching it is 15%, but most of the times, it's 1 Cpu doing
> 4% and 1 doing 2%, so I presume that's not the problem?
>
> I also edited the .conf file located in /etc/qemu-server and I have
> tried both " ide0: local:108/vm-108-disk-1.raw,cache=writethrough" and "
> ide0: local:108/vm-108-disk-1.raw,cache=none" but with both configs I
> didn't see any major improvements.
I hope you did virtual machine restart after that changes?

 The virtual server has been installed
> with 2 virtual discs, 1 of 40GB and the second with 200GB.
> The machine is especially slow when copying large data over, than the
> speed drops to about 30-70 Kbyte/sec instead of at least 20 Mbyte/sec...
>
> Anyone seen this before? Help is greatly appreciated...
>
> Kind regard,
> Erik

<skip>

Best regards,
[COOLCOLD-RIPN]