[PVE-User] Error with eth bridge in Proxmox 1.7

[Alejandro Hiniesta]

Hello to all:
I have installed version 1.7 in a new HP server to use KVM. I had other
servers with older Proxmox version but always using OpenVZ.
I have made 4 bridges, one for each eth port. I have created 3 KVM machines.
Each of one has a diferent bridge, and the hipervisor has de other left.

The problem is that if I try to access via ssh to any of the bridges IP, it
always become the hipervisor login. Don't know if is a mistake of config or
a bug. Here is the copy of my /etc/network/interfaces

auto lo
iface lo inet loopback

iface eth0 inet manual

iface eth1 inet manual

iface eth2 inet manual

iface eth3 inet manual

auto vmbr0
iface vmbr0 inet static
    address  192.168.1.3
    netmask  255.255.255.0
    gateway  192.168.1.5
    bridge_ports eth0
    bridge_stp off
    bridge_fd 0

auto vmbr1
iface vmbr1 inet static
    address  192.168.1.4
    netmask  255.255.255.0
    bridge_ports eth1
    bridge_stp off
    bridge_fd 0

auto vmbr2
iface vmbr2 inet static
    address  192.168.1.6
    netmask  255.255.255.0
    bridge_ports eth2
    bridge_stp off
    bridge_fd 0

auto vmbr5
iface vmbr5 inet static
    address  192.168.1.7
    netmask  255.255.255.0
    bridge_ports eth3
    bridge_stp off
    bridge_fd 0

regards,
Alejandro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-user/attachments/20101214/25bba0c8/attachment.htm>