[PVE-User] proxmox network config

Joe Burleson joe.burleson at csm.astate.edu
Fri Oct 31 12:48:05 CET 2008

I do not know if this will help or not, but here is a link on setting
up a hardware node firewall that controls access to all containers.

It is from the OpenVZ wiki:

On Fri, Oct 31, 2008 at 1:40 AM, Dietmar Maurer <dietmar at proxmox.com> wrote:
>> Can I have a Host Proxmox with a public ip and a private ip, something
>> like you have in your eth1 with public ip and in the vmbr0 with
> private
>> ip, so i can have access by the public IP and some of your VE virtual
>> can have access by the private ip and others by their public ips. Or
>> Can
>> i have only VE vitual with public ips by using the KVM?
> You can create up to 10 bridges, connect them to physical interfaces,
> and
> assign them public or private IPs. The problem is that you also need a
> firewall to restrict traffic between them, and that is the hard part. We
> do not support that now, but you can take a look at:
> http://www.fridu.org/fulup-posts/40-hosting-a-sysadmin/52-openvz-virtual
> ization#architecture
> He has also a nice video tutorial. You can get some ideas there.
> - Dietmar
> _______________________________________________
> pve-user mailing list
> pve-user at pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Joe Burleson
Instructor / Tech Support
Department of Computer Science
Arkansas State University

More information about the pve-user mailing list