[PVE-User] Syslog and Backup

01multi.com gmo at 01info.be
Mon Nov 10 13:56:58 CET 2008


Hello,

 

For my test of your ProxMox, I have a stress with this error :

 

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 7

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

What do you think about this ?

 

 

So, I'd like to set up a backup "Delta Block In File" file vzdump (tgz). 
I advise you to compress or leave without compression. The idea is to make a backup inside the file to limit the use of bandwidth ...

 

 

Thank you in advance, and congratulation for this very good software J

 

Gaëtan Moyse,

 

 

 

 

 

Nov 10 13:40:36 max2 shutdown[8753]: shutting down for system reboot

Nov 10 13:40:37 max2 init: Switching to runlevel: 6

Nov 10 13:40:38 max2 postfix/master[3168]: terminating on signal 15

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bf9881d8) on /

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bf9881b4) on /

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bf9881d0) on /

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bf9881d8) on /

Nov 10 13:40:41 max2 kernel: ioctl32(mount:9380): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bf9881b4) on /

Nov 10 13:40:44 max2 kernel: CT: 102: stopped

Nov 10 13:40:44 max2 kernel: CT: 101: stopped

Nov 10 13:40:46 max2 pvedaemon[4049]: server closing 

Nov 10 13:40:46 max2 ntpd[4178]: ntpd exiting on signal 15

Nov 10 13:40:48 max2 qm[9711]: Stopping Qemu Server - sending shutdown requests to all VMs 

Nov 10 13:40:48 max2 qm[9711]: VM 104 sending 'shutdown' 

Nov 10 13:40:48 max2 kernel: vmbr0: port 2(tap0) entering disabled state

Nov 10 13:40:48 max2 kernel: vmbr0: port 2(tap0) entering disabled state

Nov 10 13:40:53 max2 rpc.statd[3899]: Caught signal 15, un-registering and exiting.

Nov 10 13:40:53 max2 kernel: Kernel logging (proc) stopped.

Nov 10 13:40:53 max2 kernel: Kernel log daemon terminating.

Nov 10 13:40:54 max2 exiting on signal 15

Nov 10 13:42:30 max2 syslogd 1.4.1#18: restart.

Nov 10 13:42:30 max2 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.

Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys cpuset

Nov 10 13:42:30 max2 kernel: Linux version 2.6.24-1-pve (root at oahu) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Fri Oct 24 11:34:13 CEST 2008 (Ubuntu 2.6.24-4.6-server)

Nov 10 13:42:30 max2 kernel: Command line: root=/dev/mapper/pve-root ro 

Nov 10 13:42:30 max2 kernel: BIOS-provided physical RAM map:

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 0000000000100000 - 00000000cfe54000 (usable)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000cfe54000 - 00000000cfe5c000 (ACPI data)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000cfe5c000 - 00000000cfe5d000 (usable)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000cfe5d000 - 00000000d0000000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)

Nov 10 13:42:30 max2 kernel:  BIOS-e820: 0000000100000000 - 00000001affff000 (usable)

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 0, 159) 0 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 256, 851540) 1 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 851548, 851549) 2 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 1048576, 1769471) 3 entries of 3200 used

Nov 10 13:42:30 max2 kernel: end_pfn_map = 1769471

Nov 10 13:42:30 max2 kernel: DMI 2.4 present.

Nov 10 13:42:30 max2 kernel: ACPI: RSDP signature @ 0xFFFF8100000F4F00 checksum 0

Nov 10 13:42:30 max2 kernel: ACPI: RSDP 000F4F00, 0024 (r2 HP    )

Nov 10 13:42:30 max2 kernel: ACPI: XSDT CFE547C0, 007C (r1 HP     ProLiant        2   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: FACP CFE54840, 00F4 (r3 HP     ProLiant        2   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: DSDT CFE54940, 213E (r1 HP         DSDT        1 INTL 20030228)

Nov 10 13:42:30 max2 kernel: ACPI: FACS CFE54100, 0040

Nov 10 13:42:30 max2 kernel: ACPI: SPCR CFE54140, 0050 (r1 HP     SPCRRBSU        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: MCFG CFE541C0, 003C (r1 HP     ProLiant        1             0)

Nov 10 13:42:30 max2 kernel: ACPI: HPET CFE54200, 0038 (r1 HP     ProLiant        2   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: SPMI CFE54240, 0040 (r5 HP     ProLiant        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: ERST CFE54280, 01D0 (r1 HP     ProLiant        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: APIC CFE54480, 009E (r1 HP     ProLiant        2             0)

Nov 10 13:42:30 max2 kernel: ACPI: FFFF CFE54540, 0176 (r1 HP     ProLiant        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: BERT CFE546C0, 0030 (r1 HP     ProLiant        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: HEST CFE54700, 00BC (r1 HP     ProLiant        1   Ò^D     162E)

Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE59000, 0CC5 (r1 HP        SSDTP        1 INTL 20061109)

Nov 10 13:42:30 max2 kernel: No NUMA configuration found

Nov 10 13:42:30 max2 kernel: Faking a node at 0000000000000000-00000001affff000

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 0, 159) 0 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 256, 851540) 1 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 851548, 851549) 2 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Entering add_active_range(0, 1048576, 1769471) 3 entries of 3200 used

Nov 10 13:42:30 max2 kernel: Bootmem setup node 0 0000000000000000-00000001affff000

Nov 10 13:42:30 max2 kernel: Zone PFN ranges:

Nov 10 13:42:30 max2 kernel:   DMA             0 ->     4096

Nov 10 13:42:30 max2 kernel:   DMA32        4096 ->  1048576

Nov 10 13:42:30 max2 kernel:   Normal    1048576 ->  1769471

Nov 10 13:42:30 max2 kernel: Movable zone start PFN for each node

Nov 10 13:42:30 max2 kernel: early_node_map[4] active PFN ranges

Nov 10 13:42:30 max2 kernel:     0:        0 ->      159

Nov 10 13:42:30 max2 kernel:     0:      256 ->   851540

Nov 10 13:42:30 max2 kernel:     0:   851548 ->   851549

Nov 10 13:42:30 max2 kernel:     0:  1048576 ->  1769471

Nov 10 13:42:30 max2 kernel: On node 0 totalpages: 1572339

Nov 10 13:42:30 max2 kernel:   DMA zone: 64 pages used for memmap

Nov 10 13:42:30 max2 kernel:   DMA zone: 1420 pages reserved

Nov 10 13:42:30 max2 kernel:   DMA zone: 2515 pages, LIFO batch:0

Nov 10 13:42:30 max2 kernel:   DMA32 zone: 16320 pages used for memmap

Nov 10 13:42:30 max2 kernel:   DMA32 zone: 831125 pages, LIFO batch:31

Nov 10 13:42:30 max2 kernel:   Normal zone: 11263 pages used for memmap

Nov 10 13:42:30 max2 kernel:   Normal zone: 709632 pages, LIFO batch:31

Nov 10 13:42:30 max2 kernel:   Movable zone: 0 pages used for memmap

Nov 10 13:42:30 max2 kernel: ACPI: PM-Timer IO Port: 0x908

Nov 10 13:42:30 max2 kernel: ACPI: Local APIC address 0xfee00000

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

Nov 10 13:42:30 max2 kernel: Processor #0 (Bootup-CPU)

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

Nov 10 13:42:30 max2 kernel: Processor #2

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

Nov 10 13:42:30 max2 kernel: Processor #1

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)

Nov 10 13:42:30 max2 kernel: Processor #3

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)

Nov 10 13:42:30 max2 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

Nov 10 13:42:30 max2 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

Nov 10 13:42:30 max2 kernel: IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23

Nov 10 13:42:30 max2 kernel: ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])

Nov 10 13:42:30 max2 kernel: IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47

Nov 10 13:42:30 max2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

Nov 10 13:42:30 max2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Nov 10 13:42:30 max2 kernel: ACPI: IRQ0 used by override.

Nov 10 13:42:30 max2 kernel: ACPI: IRQ2 used by override.

Nov 10 13:42:30 max2 kernel: ACPI: IRQ9 used by override.

Nov 10 13:42:30 max2 kernel: Setting APIC routing to flat

Nov 10 13:42:30 max2 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000

Nov 10 13:42:30 max2 kernel: Using ACPI (MADT) for SMP configuration information

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000cfe54000 - 00000000cfe5c000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000cfe5d000 - 00000000d0000000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000

Nov 10 13:42:30 max2 kernel: swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000

Nov 10 13:42:30 max2 kernel: Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)

Nov 10 13:42:30 max2 kernel: SMP: Allowing 8 CPUs, 4 hotplug CPUs

Nov 10 13:42:30 max2 kernel: PERCPU: Allocating 42608 bytes of per cpu data

Nov 10 13:42:30 max2 kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1543272

Nov 10 13:42:30 max2 kernel: Policy zone: Normal

Nov 10 13:42:30 max2 kernel: Kernel command line: root=/dev/mapper/pve-root ro 

Nov 10 13:42:30 max2 kernel: Initializing CPU#0

Nov 10 13:42:30 max2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)

Nov 10 13:42:30 max2 kernel: Extended CMOS year: 2000

Nov 10 13:42:30 max2 kernel: hpet clockevent registered

Nov 10 13:42:30 max2 kernel: TSC calibrated against HPET

Nov 10 13:42:30 max2 kernel: Marking TSC unstable due to TSCs unsynchronized

Nov 10 13:42:30 max2 kernel: time.c: Detected 2500.088 MHz processor.

Nov 10 13:42:30 max2 kernel: Console: colour VGA+ 80x25

Nov 10 13:42:30 max2 kernel: console [tty0] enabled

Nov 10 13:42:30 max2 kernel: Checking aperture...

Nov 10 13:42:30 max2 kernel: Calgary: detecting Calgary via BIOS EBDA area

Nov 10 13:42:30 max2 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!

Nov 10 13:42:30 max2 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

Nov 10 13:42:30 max2 kernel: Placing software IO TLB between 0x1093000 - 0x5093000

Nov 10 13:42:30 max2 kernel: Memory: 6093384k/7077884k available (2743k kernel code, 195972k reserved, 1389k data, 328k init)

Nov 10 13:42:30 max2 kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1

Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5003.73 BogoMIPS (lpj=10007464)

Nov 10 13:42:30 max2 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

Nov 10 13:42:30 max2 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

Nov 10 13:42:30 max2 kernel: Mount-cache hash table entries: 256

Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys ns

Nov 10 13:42:30 max2 kernel: Initializing cgroup subsys cpuacct

Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K

Nov 10 13:42:30 max2 kernel: CPU 0/0 -> Node 0

Nov 10 13:42:30 max2 kernel: using mwait in idle threads.

Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0

Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 0

Nov 10 13:42:30 max2 kernel: CPU0: Thermal monitoring enabled (TM2)

Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to UP code

Nov 10 13:42:30 max2 kernel: Early unpacking initramfs... done

Nov 10 13:42:30 max2 kernel: ACPI: Core revision 20070126

Nov 10 13:42:30 max2 kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

Nov 10 13:42:30 max2 kernel: Page beancounter hash is 524288 entries.

Nov 10 13:42:30 max2 kernel: Using local APIC timer interrupts.

Nov 10 13:42:30 max2 kernel: APIC timer calibration result 20834054

Nov 10 13:42:30 max2 kernel: Detected 20.834 MHz APIC timer.

Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code

Nov 10 13:42:30 max2 kernel: Booting processor 1/4 APIC 0x2

Nov 10 13:42:30 max2 kernel: Initializing CPU#1

Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.26 BogoMIPS (lpj=10000525)

Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K

Nov 10 13:42:30 max2 kernel: CPU 1/2 -> Node 0

Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0

Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 2

Nov 10 13:42:30 max2 kernel: CPU1: Thermal monitoring enabled (TM2)

Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06

Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code

Nov 10 13:42:30 max2 kernel: Booting processor 2/4 APIC 0x1

Nov 10 13:42:30 max2 kernel: Initializing CPU#2

Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.22 BogoMIPS (lpj=10000444)

Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K

Nov 10 13:42:30 max2 kernel: CPU 2/1 -> Node 0

Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0

Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 1

Nov 10 13:42:30 max2 kernel: CPU2: Thermal monitoring enabled (TM2)

Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06

Nov 10 13:42:30 max2 kernel: SMP alternatives: switching to SMP code

Nov 10 13:42:30 max2 kernel: Booting processor 3/4 APIC 0x3

Nov 10 13:42:30 max2 kernel: Initializing CPU#3

Nov 10 13:42:30 max2 kernel: Calibrating delay using timer specific routine.. 5000.24 BogoMIPS (lpj=10000496)

Nov 10 13:42:30 max2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

Nov 10 13:42:30 max2 kernel: CPU: L2 cache: 6144K

Nov 10 13:42:30 max2 kernel: CPU 3/3 -> Node 0

Nov 10 13:42:30 max2 kernel: CPU: Physical Processor ID: 0

Nov 10 13:42:30 max2 kernel: CPU: Processor Core ID: 3

Nov 10 13:42:30 max2 kernel: CPU3: Thermal monitoring enabled (TM2)

Nov 10 13:42:30 max2 kernel: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz stepping 06

Nov 10 13:42:30 max2 kernel: Brought up 4 CPUs

Nov 10 13:42:30 max2 kernel: CPU0 attaching sched-domain:

Nov 10 13:42:30 max2 kernel:  domain 0: span 00000000,00000005

Nov 10 13:42:30 max2 kernel:   groups: 00000000,00000001 00000000,00000004

Nov 10 13:42:30 max2 kernel:   domain 1: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:    groups: 00000000,00000005 00000000,0000000a

Nov 10 13:42:30 max2 kernel:    domain 2: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:     groups: 00000000,0000000f

Nov 10 13:42:30 max2 kernel: CPU1 attaching sched-domain:

Nov 10 13:42:30 max2 kernel:  domain 0: span 00000000,0000000a

Nov 10 13:42:30 max2 kernel:   groups: 00000000,00000002 00000000,00000008

Nov 10 13:42:30 max2 kernel:   domain 1: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:    groups: 00000000,0000000a 00000000,00000005

Nov 10 13:42:30 max2 kernel:    domain 2: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:     groups: 00000000,0000000f

Nov 10 13:42:30 max2 kernel: CPU2 attaching sched-domain:

Nov 10 13:42:30 max2 kernel:  domain 0: span 00000000,00000005

Nov 10 13:42:30 max2 kernel:   groups: 00000000,00000004 00000000,00000001

Nov 10 13:42:30 max2 kernel:   domain 1: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:    groups: 00000000,00000005 00000000,0000000a

Nov 10 13:42:30 max2 kernel:    domain 2: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:     groups: 00000000,0000000f

Nov 10 13:42:30 max2 kernel: CPU3 attaching sched-domain:

Nov 10 13:42:30 max2 kernel:  domain 0: span 00000000,0000000a

Nov 10 13:42:30 max2 kernel:   groups: 00000000,00000008 00000000,00000002

Nov 10 13:42:30 max2 kernel:   domain 1: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:    groups: 00000000,0000000a 00000000,00000005

Nov 10 13:42:30 max2 kernel:    domain 2: span 00000000,0000000f

Nov 10 13:42:30 max2 kernel:     groups: 00000000,0000000f

Nov 10 13:42:30 max2 kernel: net_namespace: 152 bytes

Nov 10 13:42:30 max2 kernel: Time: 12:42:13  Date: 11/10/08

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 16

Nov 10 13:42:30 max2 kernel: ACPI: bus type pci registered

Nov 10 13:42:30 max2 kernel: PCI: Using configuration type 1

Nov 10 13:42:30 max2 kernel: ACPI: EC: Look up EC in DSDT

Nov 10 13:42:30 max2 kernel: ACPI: Interpreter enabled

Nov 10 13:42:30 max2 kernel: ACPI: (supports S0 S4 S5)

Nov 10 13:42:30 max2 kernel: ACPI: Using IOAPIC for interrupt routing

Nov 10 13:42:30 max2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)

Nov 10 13:42:30 max2 kernel: PCI: Transparent bridge - 0000:00:1e.0

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT]

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)

Nov 10 13:42:30 max2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay

Nov 10 13:42:30 max2 kernel: pnp: PnP ACPI init

Nov 10 13:42:30 max2 kernel: ACPI: bus type pnp registered

Nov 10 13:42:30 max2 kernel: pnp: PnP ACPI: found 10 devices

Nov 10 13:42:30 max2 kernel: ACPI: ACPI bus type pnp unregistered

Nov 10 13:42:30 max2 kernel: PCI: Using ACPI for IRQ routing

Nov 10 13:42:30 max2 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 8

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 20

Nov 10 13:42:30 max2 kernel: PCI-GART: No AMD northbridge found.

Nov 10 13:42:30 max2 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

Nov 10 13:42:30 max2 kernel: hpet0: 3 64-bit timers, 14318180 Hz

Nov 10 13:42:30 max2 kernel: Time: hpet clocksource has been installed.

Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 0

Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 2

Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 1

Nov 10 13:42:30 max2 kernel: Switched to high resolution mode on CPU 3

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x408-0x40f has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x700-0x71f has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x800-0x83f has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x900-0x97f has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xc80-0xc83 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xcd4-0xcd7 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xf50-0xf58 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xca0-0xca1 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0xca4-0xca5 has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: ioport range 0x2f8-0x2ff has been reserved

Nov 10 13:42:30 max2 kernel: system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved

Nov 10 13:42:30 max2 kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:00.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:01.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:0a:02.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:09:00.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:09:00.3

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:02.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: fdf00000-fdffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:03.0

Nov 10 13:42:30 max2 kernel:   IO window: 4000-4fff

Nov 10 13:42:30 max2 kernel:   MEM window: fdd00000-fdefffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d1000000-d10fffff

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:04.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:05.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: disabled.

Nov 10 13:42:30 max2 kernel:   PREFETCH window: disabled.

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:02:00.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: f8000000-f9ffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d1100000-d11fffff

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:06.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: f8000000-f9ffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d1100000-d11fffff

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:04:00.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: fa000000-fbffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d1200000-d12fffff

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:07.0

Nov 10 13:42:30 max2 kernel:   IO window: disabled.

Nov 10 13:42:30 max2 kernel:   MEM window: fa000000-fbffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d1200000-d12fffff

Nov 10 13:42:30 max2 kernel: PCI: Bridge: 0000:00:1e.0

Nov 10 13:42:30 max2 kernel:   IO window: 2000-3fff

Nov 10 13:42:30 max2 kernel:   MEM window: f7e00000-f7ffffff

Nov 10 13:42:30 max2 kernel:   PREFETCH window: d8000000-dfffffff

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.0 to 64

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:00.0 to 64

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:01.0 to 64

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:02.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.3 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:02:00.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:07.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:04:00.0 to 64

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 2

Nov 10 13:42:30 max2 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)

Nov 10 13:42:30 max2 kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

Nov 10 13:42:30 max2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

Nov 10 13:42:30 max2 kernel: TCP: Hash tables configured (established 524288 bind 65536)

Nov 10 13:42:30 max2 kernel: TCP reno registered

Nov 10 13:42:30 max2 kernel: checking if image is initramfs... it is

Nov 10 13:42:30 max2 kernel: Freeing initrd memory: 13118k freed

Nov 10 13:42:30 max2 kernel: audit: initializing netlink socket (disabled)

Nov 10 13:42:30 max2 kernel: audit(1226320934.360:1): initialized

Nov 10 13:42:30 max2 kernel: Total HugeTLB memory allocated, 0

Nov 10 13:42:30 max2 kernel: VFS: Disk quotas dquot_6.5.1

Nov 10 13:42:30 max2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

Nov 10 13:42:30 max2 kernel: io scheduler noop registered

Nov 10 13:42:30 max2 kernel: io scheduler anticipatory registered

Nov 10 13:42:30 max2 kernel: io scheduler deadline registered

Nov 10 13:42:30 max2 kernel: io scheduler cfq registered (default)

Nov 10 13:42:30 max2 kernel: Boot video device is 0000:01:03.0

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:02.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:03.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:03.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:04.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:04.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:05.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:05.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:06.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:07.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:00:07.0:pcie00]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:09:00.0 to 64

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:09:00.0:pcie10]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:00.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:00.0:pcie20]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:01.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:01.0:pcie20]

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:0a:02.0 to 64

Nov 10 13:42:30 max2 kernel: assign_interrupt_mode Found MSI capability

Nov 10 13:42:30 max2 kernel: Allocate Port Service[0000:0a:02.0:pcie20]

Nov 10 13:42:30 max2 kernel: Real Time Clock Driver v1.12ac

Nov 10 13:42:30 max2 kernel: hpet_resources: 0xfed00000 is busy

Nov 10 13:42:30 max2 kernel: Linux agpgart interface v0.102

Nov 10 13:42:30 max2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

Nov 10 13:42:30 max2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Nov 10 13:42:30 max2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

Nov 10 13:42:30 max2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Nov 10 13:42:30 max2 kernel: RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

Nov 10 13:42:30 max2 kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0

Nov 10 13:42:30 max2 kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12

Nov 10 13:42:30 max2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1

Nov 10 13:42:30 max2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12

Nov 10 13:42:30 max2 kernel: mice: PS/2 mouse device common for all mice

Nov 10 13:42:30 max2 kernel: cpuidle: using governor ladder

Nov 10 13:42:30 max2 kernel: cpuidle: using governor menu

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 1

Nov 10 13:42:30 max2 kernel: NET: Registered protocol family 17

Nov 10 13:42:30 max2 kernel: registered taskstats version 1

Nov 10 13:42:30 max2 kernel:   Magic number: 0:737:733

Nov 10 13:42:30 max2 kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

Nov 10 13:42:30 max2 kernel: BIOS EDD facility v0.16 2004-Jun-25, 6 devices found

Nov 10 13:42:30 max2 kernel: Freeing unused kernel memory: 328k freed

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usbfs

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver hub

Nov 10 13:42:30 max2 kernel: usbcore: registered new device driver usb

Nov 10 13:42:30 max2 kernel: USB Universal Host Controller Interface driver v3.0

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000

Nov 10 13:42:30 max2 kernel: usb usb1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 1-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 1-0:1.0: 2 ports detected

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020

Nov 10 13:42:30 max2 kernel: usb usb2: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 2-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 2-0:1.0: 2 ports detected

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040

Nov 10 13:42:30 max2 kernel: usb usb3: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 3-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 3-0:1.0: 2 ports detected

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060

Nov 10 13:42:30 max2 kernel: usb usb4: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 4-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 4-0:1.0: 2 ports detected

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports

Nov 10 13:42:30 max2 kernel: uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800

Nov 10 13:42:30 max2 kernel: usb usb5: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 5-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 5-0:1.0: 2 ports detected

Nov 10 13:42:30 max2 kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2

Nov 10 13:42:30 max2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5

Nov 10 13:42:30 max2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

Nov 10 13:42:30 max2 kernel: usb 2-1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: 4 ports detected

Nov 10 13:42:30 max2 kernel: SCSI subsystem initialized

Nov 10 13:42:30 max2 kernel: HP CISS Driver (v 3.6.14)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16

Nov 10 13:42:30 max2 kernel: cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 2292 using DAC

Nov 10 13:42:30 max2 kernel:       blocks= 286677120 block_size= 512

Nov 10 13:42:30 max2 kernel:       heads=255, sectors=32, cylinders=35132

Nov 10 13:42:30 max2 kernel: 

Nov 10 13:42:30 max2 kernel:       blocks= 586006832 block_size= 512

Nov 10 13:42:30 max2 kernel:       heads=255, sectors=32, cylinders=71815

Nov 10 13:42:30 max2 kernel: 

Nov 10 13:42:30 max2 kernel:       blocks= 286677120 block_size= 512

Nov 10 13:42:30 max2 kernel:       heads=255, sectors=32, cylinders=35132

Nov 10 13:42:30 max2 kernel: 

Nov 10 13:42:30 max2 kernel:  cciss/c0d0: p1 p2

Nov 10 13:42:30 max2 kernel:       blocks= 586006832 block_size= 512

Nov 10 13:42:30 max2 kernel:       heads=255, sectors=32, cylinders=71815

Nov 10 13:42:30 max2 kernel: 

Nov 10 13:42:30 max2 kernel:  cciss/c0d1: p1

Nov 10 13:42:30 max2 kernel: libata version 3.00 loaded.

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64

Nov 10 13:42:30 max2 kernel: ACPI: PCI interrupt for device 0000:00:1f.1 disabled

Nov 10 13:42:30 max2 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2

Nov 10 13:42:30 max2 kernel: ata_piix 0000:00:1f.1: version 2.12

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64

Nov 10 13:42:30 max2 kernel: scsi0 : ata_piix

Nov 10 13:42:30 max2 kernel: scsi1 : ata_piix

Nov 10 13:42:30 max2 kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14

Nov 10 13:42:30 max2 kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15

Nov 10 13:42:30 max2 kernel: usb 5-1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: ata1.00: ATAPI: TEAC    DV-W28E-RW, G.B2, max UDMA/33

Nov 10 13:42:30 max2 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 3

Nov 10 13:42:30 max2 kernel: usb 5-2: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 5-2:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 5-2:1.0: 7 ports detected

Nov 10 13:42:30 max2 kernel: ata1.00: configured for UDMA/33

Nov 10 13:42:30 max2 kernel: scsi 0:0:0:0: CD-ROM            TEAC     DV-W28E-RW       G.B2 PQ: 0 ANSI: 5

Nov 10 13:42:30 max2 kernel: iTCO_vendor_support: vendor-support=0

Nov 10 13:42:30 max2 kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 3

Nov 10 13:42:30 max2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

Nov 10 13:42:30 max2 kernel: iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware

Nov 10 13:42:30 max2 kernel: iTCO_wdt: No card detected

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16

Nov 10 13:42:30 max2 kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64

Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller

Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6

Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: debug port 1

Nov 10 13:42:30 max2 kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7

Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000

Nov 10 13:42:30 max2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

Nov 10 13:42:30 max2 kernel: usb usb6: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 6-0:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 6-0:1.0: 8 ports detected

Nov 10 13:42:30 max2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Nov 10 13:42:30 max2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Nov 10 13:42:30 max2 kernel: ide0: I/O resource 0x3F6-0x3F6 not free.

Nov 10 13:42:30 max2 kernel: ide0: ports already in use, skipping probe

Nov 10 13:42:30 max2 kernel: ide1: I/O resource 0x376-0x376 not free.

Nov 10 13:42:30 max2 kernel: ide1: ports already in use, skipping probe

Nov 10 13:42:30 max2 kernel: usb 2-1.1: device not accepting address 3, error -71

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)

Nov 10 13:42:30 max2 last message repeated 4 times

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1.  Maybe the USB cable is bad?

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)

Nov 10 13:42:30 max2 last message repeated 4 times

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1.  Maybe the USB cable is bad?

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot reset port 1 (err = -71)

Nov 10 13:42:30 max2 last message repeated 4 times

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: Cannot enable port 1.  Maybe the USB cable is bad?

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: cannot disable port 1 (err = -71)

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: hub_port_status failed (err = -71)

Nov 10 13:42:30 max2 last message repeated 3 times

Nov 10 13:42:30 max2 kernel: Driver 'sr' needs updating - please use bus_type methods

Nov 10 13:42:30 max2 kernel: usb 2-1: USB disconnect, address 2

Nov 10 13:42:30 max2 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray

Nov 10 13:42:30 max2 kernel: Uniform CD-ROM driver Revision: 3.20

Nov 10 13:42:30 max2 kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0

Nov 10 13:42:30 max2 kernel: Driver 'sd' needs updating - please use bus_type methods

Nov 10 13:42:30 max2 kernel: usb 2-1: new full speed USB device using uhci_hcd and address 7

Nov 10 13:42:30 max2 kernel: usb 2-1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 2-1:1.0: 4 ports detected

Nov 10 13:42:30 max2 kernel: usb 2-1.1: new full speed USB device using uhci_hcd and address 8

Nov 10 13:42:30 max2 kernel: usb 2-1.1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: hub 2-1.1:1.0: USB hub found

Nov 10 13:42:30 max2 kernel: hub 2-1.1:1.0: 4 ports detected

Nov 10 13:42:30 max2 kernel: usb 2-1.2: new low speed USB device using uhci_hcd and address 9

Nov 10 13:42:30 max2 kernel: usb 2-1.2: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: usb 2-1.1.1: new low speed USB device using uhci_hcd and address 10

Nov 10 13:42:30 max2 kernel: usb 2-1.1.1: configuration #1 chosen from 1 choice

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver libusual

Nov 10 13:42:30 max2 kernel: Initializing USB Mass Storage driver...

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usb-storage

Nov 10 13:42:30 max2 kernel: USB Mass Storage support registered.

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver hiddev

Nov 10 13:42:30 max2 kernel: input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.0/input/input1

Nov 10 13:42:30 max2 kernel: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1

Nov 10 13:42:30 max2 kernel: input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb5/5-1/5-1:1.1/input/input2

Nov 10 13:42:30 max2 kernel: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1

Nov 10 13:42:30 max2 kernel: input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input3

Nov 10 13:42:30 max2 kernel: input,hidraw2: USB HID v1.10 Keyboard [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.1-1.2

Nov 10 13:42:30 max2 kernel: input: USB KVM Switch USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.1/input/input4

Nov 10 13:42:30 max2 kernel: input,hidraw3: USB HID v1.10 Mouse [USB KVM Switch USB KVM Switch] on usb-0000:00:1d.1-1.2

Nov 10 13:42:30 max2 kernel: input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input5

Nov 10 13:42:30 max2 kernel: input,hidraw4: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1d.1-1.1.1

Nov 10 13:42:30 max2 kernel: input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input6

Nov 10 13:42:30 max2 kernel: input,hiddev96,hidraw5: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1d.1-1.1.1

Nov 10 13:42:30 max2 kernel: usbcore: registered new interface driver usbhid

Nov 10 13:42:30 max2 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

Nov 10 13:42:30 max2 kernel: device-mapper: uevent: version 1.0.3

Nov 10 13:42:30 max2 kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel at redhat.com

Nov 10 13:42:30 max2 kernel: kjournald starting.  Commit interval 5 seconds

Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.

Nov 10 13:42:30 max2 kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5

Nov 10 13:42:30 max2 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7

Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5F800, 00D8 (r1 HP      CPU0CST        1 INTL 20061109)

Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._CST] (Node ffff8101a8c01040), AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5F900, 00D8 (r1 HP      CPU1CST        1 INTL 20061109)

Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._CST] (Node ffff8101a46ead40), AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5FA00, 00D8 (r1 HP      CPU2CST        1 INTL 20061109)

Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._CST] (Node ffff8101a3f79da0), AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI: SSDT CFE5FB00, 00D8 (r1 HP      CPU3CST        1 INTL 20061109)

Nov 10 13:42:30 max2 kernel: ACPI Error (psargs-0355): [CS03] Namespace lookup failure, AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._CST] (Node ffff8101a46ea7e0), AE_NOT_FOUND

Nov 10 13:42:30 max2 kernel: ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]

Nov 10 13:42:30 max2 last message repeated 3 times

Nov 10 13:42:30 max2 kernel: EDAC MC: Ver: 2.1.0 Oct 24 2008

Nov 10 13:42:30 max2 kernel: input: Power Button (FF) as /devices/virtual/input/input8

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_del_mc

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_add_mc

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_pci_create_generic_ctl

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_alloc

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_handle_fbd_ce

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_free

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_pci_release_generic_ctl

Nov 10 13:42:30 max2 kernel: i5000_edac: Unknown symbol edac_mc_handle_fbd_ue

Nov 10 13:42:30 max2 kernel: EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0

Nov 10 13:42:30 max2 kernel: EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)

Nov 10 13:42:30 max2 kernel: ACPI: Power Button (FF) [PWRF]

Nov 10 13:42:30 max2 kernel: intel_rng: FWH not detected

Nov 10 13:42:30 max2 kernel: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.9 (December 8, 2007)

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18

Nov 10 13:42:30 max2 kernel: ipmi message handler version 39.1

Nov 10 13:42:30 max2 kernel: IPMI System Interface driver.

Nov 10 13:42:30 max2 kernel: ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0

Nov 10 13:42:30 max2 kernel: ACPI: Thermal Zone [THM0] (8 C)

Nov 10 13:42:30 max2 kernel: ipmi: Found new BMC (man_id: 0x00000b,  prod_id: 0x0000, dev_id: 0x11)

Nov 10 13:42:30 max2 kernel: IPMI kcs interface initialized

Nov 10 13:42:30 max2 kernel: ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0

Nov 10 13:42:30 max2 kernel: ipmi_si: duplicate interface

Nov 10 13:42:30 max2 kernel: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr 00:22:64:98:4b:f6

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19

Nov 10 13:42:30 max2 kernel: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr 00:22:64:98:0a:8a

Nov 10 13:42:30 max2 kernel: ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21

Nov 10 13:42:30 max2 kernel: ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21

Nov 10 13:42:30 max2 kernel:   Using irq 21

Nov 10 13:42:30 max2 kernel: ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)

Nov 10 13:42:30 max2 kernel: IPMI kcs interface initialized

Nov 10 13:42:30 max2 kernel: EXT3 FS on dm-1, internal journal

Nov 10 13:42:30 max2 kernel: kjournald starting.  Commit interval 5 seconds

Nov 10 13:42:30 max2 kernel: EXT3 FS on dm-2, internal journal

Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.

Nov 10 13:42:30 max2 kernel: kjournald starting.  Commit interval 5 seconds

Nov 10 13:42:30 max2 kernel: EXT3 FS on cciss/c0d0p1, internal journal

Nov 10 13:42:30 max2 kernel: EXT3-fs: mounted filesystem with ordered data mode.

Nov 10 13:42:30 max2 kernel: Adding 5242872k swap on /dev/pve/swap.  Priority:-1 extents:1 across:5242872k

Nov 10 13:42:30 max2 kernel: Bridge firewalling registered

Nov 10 13:42:30 max2 kernel: vmbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

Nov 10 13:42:30 max2 kernel: device eth0 entered promiscuous mode

Nov 10 13:42:30 max2 kernel: audit(1226320946.891:2): dev=eth0 prom=256 old_prom=0 auid=4294967295

Nov 10 13:42:30 max2 kernel: bnx2: eth0: using MSI

Nov 10 13:42:30 max2 kernel: bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex

Nov 10 13:42:30 max2 kernel: vmbr0: port 1(eth0) entering learning state

Nov 10 13:42:30 max2 kernel: vmbr0: topology change detected, propagating

Nov 10 13:42:30 max2 kernel: vmbr0: port 1(eth0) entering forwarding state

Nov 10 13:42:31 max2 postfix/master[3165]: daemon started -- version 2.3.8, configuration /etc/postfix

Nov 10 13:42:31 max2 kernel: NET: Registered protocol family 10

Nov 10 13:42:31 max2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team

Nov 10 13:42:32 max2 kernel: tun: Universal TUN/TAP device driver, 1.6

Nov 10 13:42:32 max2 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>

Nov 10 13:42:33 max2 kernel: CT: 101: started

Nov 10 13:42:35 max2 kernel: CT: 102: started

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bfef9fe0) on /

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bfef9fe8) on /

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bfef9fc4) on /

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(80041272){t:12;sz:4} arg(bfef9fe0) on /

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(00001260){t:12;sz:0} arg(bfef9fe8) on /

Nov 10 13:42:35 max2 kernel: ioctl32(mount:3568): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(bfef9fc4) on /

Nov 10 13:42:37 max2 rpc.statd[3907]: Version 1.0.10 Starting

Nov 10 13:42:38 max2 pvedaemon[4079]: starting server 

Nov 10 13:42:38 max2 pvedaemon[4079]: starting 2 worker(s) 

Nov 10 13:42:38 max2 pvedaemon[4079]: worker 4088 started 

Nov 10 13:42:38 max2 pvedaemon[4079]: worker 4089 started 

Nov 10 13:42:39 max2 pvetunnel[4087]: not starting server - not part of cluster 

Nov 10 13:42:39 max2 pvemirror[4135]: not starting server - not part of cluster 

Nov 10 13:42:39 max2 ntpd[4188]: ntpd 4.2.2p4 at 1.1585-o Sun Mar  4 13:05:22 UTC 2007 (1)

Nov 10 13:42:39 max2 ntpd[4189]: precision = 1.000 usec

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface wildcard, 0.0.0.0#123 Disabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface wildcard, ::#123 Disabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface lo, ::1#123 Enabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface vmbr0, fe80::222:64ff:fe98:4bf6#123 Enabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface eth0, fe80::222:64ff:fe98:4bf6#123 Enabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface lo, 127.0.0.1#123 Enabled

Nov 10 13:42:39 max2 ntpd[4189]: Listening on interface vmbr0, 172.19.3.83#123 Enabled

Nov 10 13:42:39 max2 ntpd[4189]: kernel time sync status 0040

Nov 10 13:42:39 max2 ntpd[4189]: frequency initialized -55.603 PPM from /var/lib/ntp/ntp.drift

Nov 10 13:42:39 max2 kernel: loaded kvm module (kvm-75)

Nov 10 13:42:40 max2 qm[4214]: VM 104 start 

Nov 10 13:42:40 max2 kernel: device tap0 entered promiscuous mode

Nov 10 13:42:40 max2 kernel: audit(1226320960.611:3): dev=tap0 prom=256 old_prom=0 auid=4294967295

Nov 10 13:42:40 max2 kernel: vmbr0: port 2(tap0) entering learning state

Nov 10 13:42:40 max2 kernel: vmbr0: topology change detected, propagating

Nov 10 13:42:40 max2 kernel: vmbr0: port 2(tap0) entering forwarding state

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 0

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 1

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 2

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 3

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 4

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 5

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 6

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 7

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 0

Nov 10 13:42:41 max2 kernel: Buffer I/O error on device sr0, logical block 1

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 4

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 0

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] 

Nov 10 13:42:41 max2 kernel: sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present

Nov 10 13:42:41 max2 kernel: end_request: I/O error, dev sr0, sector 4

Nov 10 13:42:41 max2 qm[4214]: VM 103 start 

Nov 10 13:42:41 max2 kernel: device tap1 entered promiscuous mode

Nov 10 13:42:41 max2 kernel: audit(1226320961.359:4): dev=tap1 prom=256 old_prom=0 auid=4294967295

Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering learning state

Nov 10 13:42:41 max2 kernel: vmbr0: topology change detected, propagating

Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering forwarding state

Nov 10 13:42:41 max2 qm[4214]: VM 103 start failed: command '/usr/bin/kvm -monitor unix:/var/run/qemu-server/103.mon,server,nowait -vnc unix:/var/run/qemu-server/103.vnc,password -pidfile /var/run/qemu-server/103.pid -daemonize -usbdevice tablet -name F10X64-01 -smp 1 -id 103 -cpuunits 1000 -boot cad -no-acpi -tdf -k fr-be -drive file=/var/lib/vz/images/103/vm-103-disk.qcow2,if=ide,index=0,boot=on -drive file=/var/lib/vz/template/iso/F10-PR-x86_64-Live-KDE.iso,if=ide,index=2,media=cdrom -m 1024 -net tap,vlan=0,script=/var/lib/qemu-server/bridge-vlan0 -net nic,vlan=0,model=rtl8139,macaddr=0A:10:CD:37:66:A4' failed with exit code 1: qemu: could not open disk image /var/lib/vz/template/iso/F10-PR-x86_64-Live-KDE.iso 

Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering disabled state

Nov 10 13:42:41 max2 /usr/sbin/cron[4392]: (CRON) INFO (pidfile fd = 3)

Nov 10 13:42:41 max2 /usr/sbin/cron[4397]: (CRON) STARTUP (fork ok)

Nov 10 13:42:41 max2 /usr/sbin/cron[4397]: (CRON) INFO (Running @reboot jobs)

Nov 10 13:42:41 max2 kernel: vmbr0: port 3(tap1) entering disabled state

Nov 10 13:42:41 max2 /USR/SBIN/CRON[4422]: (root) CMD (test -x /usr/lib/atsar/atsadc && (LOGDIR=/var/log/atsar; CURDAY=`date +%d`; find $LOGDIR/atsa$CURDAY -mtime +2 -type f -exec rm {} \; 2> /dev/null; /usr/lib/atsar/atsadc $LOGDIR/atsa$CURDAY))

Nov 10 13:42:41 max2 kernel: vmbr0: no IPv6 routers present

Nov 10 13:42:42 max2 kernel: eth0: no IPv6 routers present

Nov 10 13:42:43 max2 kernel: kvm: emulating exchange as write

Nov 10 13:42:46 max2 ntpd[4189]: synchronized to 212.100.178.143, stratum 2

Nov 10 13:42:46 max2 ntpd[4189]: time reset -0.453851 s

Nov 10 13:42:46 max2 ntpd[4189]: kernel time sync enabled 0001

Nov 10 13:42:47 max2 proxwww[4717]: Starting new child 4717 

Nov 10 13:42:47 max2 proxwww[4718]: Starting new child 4718 

Nov 10 13:42:50 max2 kernel: tap0: no IPv6 routers present 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pve.proxmox.com/pipermail/pve-user/attachments/20081110/ce145615/attachment-0014.html>


More information about the pve-user mailing list