[PVE-User] PVE + software raid - boot process

Pongracz Istvan pongracz.istvan at gmail.com
Tue Nov 4 15:13:56 CET 2008


I successfully migrated the PVE installation to a software raid1

The base system (/, /boot, swap) are on a hard drive and the data is on
different raid1 disks.

So, my problem is, when I boot and I gave for the root /dev/md3, it
cannot boot from the root raid1 array.
If I give /dev/sda3 as root partition, it can boot, can use all raid
devices, except md3.

So, I continue the work to solve this issue, but is there any hint where
to find the Holy Grail?

As I looked into the initrd, it has no mdadm.
My next probe to regenerate the initrd with mdadm.


BSA. Mert megérdemlitek.
Open Source. Mert megérdemlem.
BSA. They value it.
Open Source. The value. It.

More information about the pve-user mailing list