[pve-devel] [PATCH installer 14/14] gui: add support for pinning network interface names
Michael Köppl
m.koeppl at proxmox.com
Tue Oct 21 16:05:31 CEST 2025
3 comments inline
On Tue Oct 14, 2025 at 3:21 PM CEST, Christoph Heiss wrote:
> Adds an additional checkbox and option button in the network panel, the
> latter triggering a dialog for setting custom names per network
> interface present on the system.
>
> Pinning is enabled by default.
>
> Each pinned network interface name defaults to `nicN`, where N is the
> pinned ID from the low-level installer.
>
> Signed-off-by: Christoph Heiss <c.heiss at proxmox.com>
> ---
> Proxmox/Sys/Net.pm | 9 +-
> proxinstall | 209 ++++++++++++++++++++++++++++++++++++++++-----
> 2 files changed, 197 insertions(+), 21 deletions(-)
>
> diff --git a/Proxmox/Sys/Net.pm b/Proxmox/Sys/Net.pm
> index 2183d27..7fe800c 100644
> --- a/Proxmox/Sys/Net.pm
> +++ b/Proxmox/Sys/Net.pm
> @@ -8,7 +8,14 @@ use Proxmox::Sys::Udev;
> use JSON qw();
>
> use base qw(Exporter);
> -our @EXPORT_OK = qw(parse_ip_address parse_ip_mask parse_fqdn);
> +our @EXPORT_OK = qw(parse_ip_address parse_ip_mask parse_fqdn MAX_IFNAME_LEN DEFAULT_PIN_PREFIX);
> +
> +# Maximum length of the (primary) name of a network interface
> +# IFNAMSIZ - 1 to account for NUL byte
> +use constant {
> + MAX_IFNAME_LEN => 15,
> + DEFAULT_PIN_PREFIX => 'nic',
> +};
>
> our $HOSTNAME_RE = "(?:[a-zA-Z0-9](?:[a-zA-Z0-9\-]{,61}?[a-zA-Z0-9])?)";
> our $FQDN_RE = "(?:${HOSTNAME_RE}\\.)*${HOSTNAME_RE}";
> diff --git a/proxinstall b/proxinstall
> index 5ba65fa..35e948a 100755
> --- a/proxinstall
> +++ b/proxinstall
> @@ -37,7 +37,7 @@ use Proxmox::Sys;
> use Proxmox::Sys::Block qw(get_cached_disks);
> use Proxmox::Sys::Command qw(syscmd);
> use Proxmox::Sys::File qw(file_read_all file_write_all);
> -use Proxmox::Sys::Net qw(parse_ip_address parse_ip_mask);
> +use Proxmox::Sys::Net qw(parse_ip_address parse_ip_mask MAX_IFNAME_LEN DEFAULT_PIN_PREFIX);
> use Proxmox::UI;
>
> my $step_number = 0; # Init number for global function list
> @@ -340,11 +340,117 @@ my $create_basic_grid = sub {
> return $grid;
> };
>
> +my sub create_network_interface_pin_view {
> + my ($done_cb) = @_;
> +
> + my $dialog = Gtk3::Dialog->new();
> + $dialog->set_title('Interface Name Pinning Options');
> + $dialog->add_button('_OK', 1);
> +
> + my $content = $dialog->get_content_area();
> +
> + my $hbox = Gtk3::Box->new('horizontal', 0);
> + $content->pack_start($hbox, 1, 1, 5);
> +
> + my $grid = Gtk3::Grid->new();
> + $grid->set_column_spacing(10);
> + $grid->set_row_spacing(10);
> +
> + # make the list scrollable, in case there are lots of interfaces
> + my $scrolled_window = Gtk3::ScrolledWindow->new();
> + $scrolled_window->set_hexpand(1);
> + $scrolled_window->set_propagate_natural_height(1);
> +
> + $scrolled_window->add($grid);
> + $scrolled_window->set_policy('never', 'automatic');
> + $scrolled_window->set_visible(1);
> + $scrolled_window->set_min_content_height(200);
> + $scrolled_window->set_margin_end(10);
> +
> + $hbox->pack_start($scrolled_window, 1, 0, 5);
> +
> + my $interfaces = Proxmox::Install::RunEnv::get()->{network}->{interfaces};
> + my $mapping = Proxmox::Install::Config::get_network_interface_pin_map();
> +
> + my $inputs = {};
> + my $row = 0;
> + for my $ifname (sort keys $interfaces->%*) {
> + my $iface = $interfaces->{$ifname};
> +
> + my $name = $mapping->{ $iface->{mac} };
> + my $label_text = "$iface->{mac} ($ifname, $iface->{driver}, $iface->{state})";
> +
> + # if the interface has addresses assigned through DHCP, show them for
> + # reference
> + if (defined($iface->{addresses})) {
> + $label_text .=
> + "\n " . join(', ', map { "$_->{address}/$_->{prefix}" } @{ $iface->{addresses} });
> + }
> +
> + my ($label, $input) = create_text_input($name, $label_text);
> + $label->set_xalign(0.);
> +
> + $grid->attach($label, 0, $row, 1, 1);
> + $grid->attach($input, 1, $row, 1, 1);
> + $row++;
> +
> + $inputs->{ $iface->{mac} } = $input;
> + }
> +
> + $hbox->show_all();
> +
> + $dialog->signal_connect(
> + response => sub {
> + my $new_mapping = {};
> + my $reverse_mapping = {};
> + foreach my $mac (keys %$inputs) {
> + my $name = $inputs->{$mac}->get_text();
> +
> + if (!defined($name) || $name eq '') {
> + Proxmox::UI::message("interface name mapping for $mac cannot be empty");
> + $inputs->{$mac}->grab_focus();
> + return;
> + }
> +
> + if ($reverse_mapping->{$name}) {
> + Proxmox::UI::message(
> + "duplicate interface name mapping '$name' for: $mac, $reverse_mapping->{$name}"
> + );
> + $inputs->{$mac}->grab_focus();
> + return;
> + }
> +
> + if (length($name) > MAX_IFNAME_LEN) {
> + Proxmox::UI::message(
> + "interface name mapping '$name' for $mac cannot be longer than "
> + . MAX_IFNAME_LEN
> + . " characters");
> + $inputs->{$mac}->grab_focus();
> + return;
> + }
same as for the TUI installer, imo the check for only-numeric interface
names would make sense. Or is there a reason it was omitted?
> +
> + $new_mapping->{$mac} = $name;
> + $reverse_mapping->{$name} = $mac;
> + }
> +
> + Proxmox::Install::Config::set_network_interface_pin_map($new_mapping);
> + $dialog->destroy();
> + $done_cb->();
> + },
> + );
> +
> + $dialog->show();
> + $dialog->run();
> +}
> +
> sub create_ipconf_view {
>
> cleanup_view();
> Proxmox::UI::display_html('ipconf.htm');
>
> + my $run_env = Proxmox::Install::RunEnv::get();
> + my $ipconf = $run_env->{ipconf};
> +
> my $grid = &$create_basic_grid();
> $grid->set_row_spacing(10);
> $grid->set_column_spacing(10);
> @@ -355,7 +461,7 @@ sub create_ipconf_view {
>
> my ($cidr_label, $cidr_box, $ipconf_entry_addr, $ipconf_entry_mask) = create_cidr_inputs($cidr);
>
> - my $device_model = Gtk3::ListStore->new('Glib::String', 'Glib::String');
> + my $device_model = Gtk3::ListStore->new('Glib::String', 'Glib::String', 'Glib::String');
> my $device_cb = Gtk3::ComboBox->new_with_model($device_model);
> $device_cb->set_active(0);
> $device_cb->set_visible(1);
> @@ -369,19 +475,59 @@ sub create_ipconf_view {
> $device_cb->pack_start($cell, 0);
> $device_cb->add_attribute($cell, 'text', 1);
>
> - my $get_device_desc = sub {
> - my $iface = shift;
> - return "$iface->{name} - $iface->{mac} ($iface->{driver})";
> + my $refresh_device_cb = sub {
> + # clear all entries and re-add them with their new names
> + my $active = $device_cb->get_active();
> + $device_model->clear();
> +
> + my $mapping = Proxmox::Install::Config::get_network_interface_pin_map();
> + my $i = 0;
> + for my $index (sort keys $ipconf->{ifaces}->%*) {
> + my $iface = $ipconf->{ifaces}->{$index};
> + my $iter = $device_model->append();
> +
> + my $symbol = "$iface->{state}" eq "UP" ? "\x{25CF}" : ' ';
> + my $name = $gtk_state->{network_pinning_enabled} ? $mapping->{ $iface->{mac} } : $iface->{name};
This seems to need a `make tidy`?
> +
> + $device_model->set(
> + $iter,
> + 0 => $symbol,
> + 1 => "$name - $iface->{mac} ($iface->{driver})",
> + );
> + $i++;
> + }
> +
> + # re-set the currently active entry to keep the users selection
> + $device_cb->set_active($active);
> };
>
> - my $run_env = Proxmox::Install::RunEnv::get();
> - my $ipconf = $run_env->{ipconf};
> + my $name_pin_opts_button = Gtk3::Button->new('Options');
> + $name_pin_opts_button->set_sensitive($gtk_state->{network_pinning_enabled});
> + $name_pin_opts_button->signal_connect(
> + clicked => sub {
> + create_network_interface_pin_view($refresh_device_cb);
> + },
> + );
> +
> + my $name_pin_checkbox = Gtk3::CheckButton->new('Pin network interface names');
> + $name_pin_checkbox->set_active($gtk_state->{network_pinning_enabled});
> + $name_pin_checkbox->signal_connect(
> + toggled => sub {
> + $name_pin_opts_button->set_sensitive(!!$name_pin_checkbox->get_active());
> + $gtk_state->{network_pinning_enabled} = !!$name_pin_checkbox->get_active();
> + $refresh_device_cb->();
> + },
> + );
>
> my ($device_active_map, $device_active_reverse_map) = ({}, {});
>
> my $device_change_handler = sub {
> my $current = shift;
>
> + # happens during the clear + re-insertion of all interfaces after
> + # the pinning changed, can be safely ignored
> + return if $current->get_active() == -1;
> +
> my $new = $device_active_map->{ $current->get_active() };
> my $iface = $ipconf->{ifaces}->{$new};
>
> @@ -389,6 +535,7 @@ sub create_ipconf_view {
> return if defined($selected) && $iface->{name} eq $selected;
>
> Proxmox::Install::Config::set_mngmt_nic($iface->{name});
> +
> $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
> if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
> $ipconf_entry_mask->set_text($iface->{inet}->{prefix} || $iface->{inet6}->{prefix})
> @@ -400,13 +547,6 @@ sub create_ipconf_view {
> my $i = 0;
> for my $index (sort keys $ipconf->{ifaces}->%*) {
> my $iface = $ipconf->{ifaces}->{$index};
> - my $iter = $device_model->append();
> - my $symbol = "$iface->{state}" eq "UP" ? "\x{25CF}" : ' ';
> - $device_model->set(
> - $iter,
> - 0 => $symbol,
> - 1 => $get_device_desc->($iface),
> - );
> $device_active_map->{$i} = $index;
> $device_active_reverse_map->{ $iface->{name} } = $i;
>
> @@ -418,6 +558,9 @@ sub create_ipconf_view {
> $i++;
> }
>
> + # fill the combobox with entries
> + $refresh_device_cb->();
> +
> if (my $nic = Proxmox::Install::Config::get_mngmt_nic()) {
> $initial_active_device_pos = $device_active_reverse_map->{$nic};
> } else {
> @@ -443,7 +586,7 @@ sub create_ipconf_view {
> $label->set_xalign(1.0);
>
> $grid->attach($label, 0, 0, 1, 1);
> - $grid->attach($device_cb, 1, 0, 1, 1);
> + $grid->attach($device_cb, 1, 0, 2, 1);
>
> my $fqdn = Proxmox::Install::Config::get_fqdn();
> my $hostname = $run_env->{network}->{hostname} || $iso_env->{product};
> @@ -452,17 +595,17 @@ sub create_ipconf_view {
>
> my ($host_label, $hostentry) = create_text_input($fqdn, 'Hostname (FQDN)');
> $grid->attach($host_label, 0, 1, 1, 1);
> - $grid->attach($hostentry, 1, 1, 1, 1);
> + $grid->attach($hostentry, 1, 1, 2, 1);
>
> $grid->attach($cidr_label, 0, 2, 1, 1);
> - $grid->attach($cidr_box, 1, 2, 1, 1);
> + $grid->attach($cidr_box, 1, 2, 2, 1);
>
> my $cfg_gateway = Proxmox::Install::Config::get_gateway();
> my $gateway = $cfg_gateway // $ipconf->{gateway} || '192.168.100.1';
>
> my ($gw_label, $ipconf_entry_gw) = create_text_input($gateway, 'Gateway');
> $grid->attach($gw_label, 0, 3, 1, 1);
> - $grid->attach($ipconf_entry_gw, 1, 3, 1, 1);
> + $grid->attach($ipconf_entry_gw, 1, 3, 2, 1);
>
> my $cfg_dns = Proxmox::Install::Config::get_dns();
> my $dnsserver = $cfg_dns // $ipconf->{dnsserver} || $gateway;
> @@ -470,7 +613,10 @@ sub create_ipconf_view {
> my ($dns_label, $ipconf_entry_dns) = create_text_input($dnsserver, 'DNS Server');
>
> $grid->attach($dns_label, 0, 4, 1, 1);
> - $grid->attach($ipconf_entry_dns, 1, 4, 1, 1);
> + $grid->attach($ipconf_entry_dns, 1, 4, 2, 1);
> +
> + $grid->attach($name_pin_checkbox, 1, 5, 1, 1);
> + $grid->attach($name_pin_opts_button, 2, 5, 1, 1);
>
> $gtk_state->{inbox}->show_all;
> set_next(
> @@ -538,6 +684,8 @@ sub create_ipconf_view {
> }
> Proxmox::Install::Config::set_dns($dns_ip);
>
> + $gtk_state->{network_pinning_enabled} = !!$name_pin_checkbox->get_active();
> +
> #print STDERR "TEST $ipaddress/$netmask $gateway_ip $dns_ip\n";
>
> $step_number++;
> @@ -573,6 +721,12 @@ sub create_ack_view {
>
> my $country = Proxmox::Install::Config::get_country();
>
> + my $mngmt_nic = Proxmox::Install::Config::get_mngmt_nic();
> + my $iface = Proxmox::Install::RunEnv::get('network')->{interfaces}->{$mngmt_nic};
> +
> + my $nic_mapping = Proxmox::Install::Config::get_network_interface_pin_map();
> + my $interface = $gtk_state->{network_pinning_enabled} ? $nic_mapping->{ $iface->{mac} } : $iface->{name};
also `make tidy`
More information about the pve-devel
mailing list