[pve-devel] [PATCH pve-manager stable-8 v3 1/3] cli: create pve8to9 script as a copy of pve7to8
Friedrich Weber
f.weber at proxmox.com
Tue Apr 29 13:36:44 CEST 2025
Signed-off-by: Friedrich Weber <f.weber at proxmox.com>
---
Notes:
new in v3
PVE/CLI/Makefile | 1 +
PVE/CLI/pve8to9.pm | 1543 ++++++++++++++++++++++++++++++++++++++++++++
bin/Makefile | 12 +-
bin/pve8to9 | 8 +
4 files changed, 1563 insertions(+), 1 deletion(-)
create mode 100644 PVE/CLI/pve8to9.pm
create mode 100755 bin/pve8to9
diff --git a/PVE/CLI/Makefile b/PVE/CLI/Makefile
index 04b60493..9ff2aeb5 100644
--- a/PVE/CLI/Makefile
+++ b/PVE/CLI/Makefile
@@ -9,6 +9,7 @@ SOURCES = \
pvenode.pm \
pvesh.pm \
pve7to8.pm \
+ pve8to9.pm \
all:
diff --git a/PVE/CLI/pve8to9.pm b/PVE/CLI/pve8to9.pm
new file mode 100644
index 00000000..42b7073b
--- /dev/null
+++ b/PVE/CLI/pve8to9.pm
@@ -0,0 +1,1543 @@
+package PVE::CLI::pve8to9;
+
+use strict;
+use warnings;
+
+use Cwd ();
+
+use PVE::API2::APT;
+use PVE::API2::Ceph;
+use PVE::API2::LXC;
+use PVE::API2::Qemu;
+use PVE::API2::Certificates;
+use PVE::API2::Cluster::Ceph;
+
+use PVE::AccessControl;
+use PVE::Ceph::Tools;
+use PVE::Cluster;
+use PVE::Corosync;
+use PVE::INotify;
+use PVE::JSONSchema;
+use PVE::NodeConfig;
+use PVE::RPCEnvironment;
+use PVE::Storage;
+use PVE::Storage::Plugin;
+use PVE::Tools qw(run_command split_list file_get_contents);
+use PVE::QemuConfig;
+use PVE::QemuServer;
+use PVE::VZDump::Common;
+use PVE::LXC;
+use PVE::LXC::Config;
+use PVE::LXC::Setup;
+
+use Term::ANSIColor;
+
+use PVE::CLIHandler;
+
+use base qw(PVE::CLIHandler);
+
+my $nodename = PVE::INotify::nodename();
+
+my $upgraded = 0; # set in check_pve_packages
+
+sub setup_environment {
+ PVE::RPCEnvironment->setup_default_cli_env();
+}
+
+my $new_suite = 'bookworm';
+my $old_suite = 'bullseye';
+my $older_suites = {
+ buster => 1,
+ stretch => 1,
+ jessie => 1,
+};
+
+my ($min_pve_major, $min_pve_minor, $min_pve_pkgrel) = (7, 4, 1);
+
+my $ceph_release2code = {
+ '12' => 'Luminous',
+ '13' => 'Mimic',
+ '14' => 'Nautilus',
+ '15' => 'Octopus',
+ '16' => 'Pacific',
+ '17' => 'Quincy',
+ '18' => 'Reef',
+};
+my $ceph_supported_release = 17; # the version we support for upgrading (i.e., available on both)
+my $ceph_supported_code_name = $ceph_release2code->{"$ceph_supported_release"}
+ or die "inconsistent source code, could not map expected ceph version to code name!";
+
+my $forced_legacy_cgroup = 0;
+
+my $counters = {
+ pass => 0,
+ skip => 0,
+ notice => 0,
+ warn => 0,
+ fail => 0,
+};
+
+my $level2color = {
+ pass => 'green',
+ notice => 'bold',
+ warn => 'yellow',
+ fail => 'bold red',
+};
+
+my $log_line = sub {
+ my ($level, $line) = @_;
+
+ $counters->{$level}++ if defined($level) && defined($counters->{$level});
+
+ my $color = $level2color->{$level} // '';
+ print color($color) if $color && $color ne '';
+
+ print uc($level), ': ' if defined($level);
+ print "$line\n";
+
+ print color('reset');
+};
+
+sub log_pass { $log_line->('pass', @_); }
+sub log_info { $log_line->('info', @_); }
+sub log_skip { $log_line->('skip', @_); }
+sub log_notice { $log_line->('notice', @_); }
+sub log_warn { $log_line->('warn', @_); }
+sub log_fail { $log_line->('fail', @_); }
+
+my $print_header_first = 1;
+sub print_header {
+ my ($h) = @_;
+ print "\n" if !$print_header_first;
+ print "= $h =\n\n";
+ $print_header_first = 0;
+}
+
+my $get_systemd_unit_state = sub {
+ my ($unit, $suppress_stderr) = @_;
+
+ my $state;
+ my $filter_output = sub {
+ $state = shift;
+ chomp $state;
+ };
+
+ my %extra = (outfunc => $filter_output, noerr => 1);
+ $extra{errfunc} = sub { } if $suppress_stderr;
+
+ eval {
+ run_command(['systemctl', 'is-enabled', "$unit"], %extra);
+ return if !defined($state);
+ run_command(['systemctl', 'is-active', "$unit"], %extra);
+ };
+
+ return $state // 'unknown';
+};
+my $log_systemd_unit_state = sub {
+ my ($unit, $no_fail_on_inactive) = @_;
+
+ my $log_method = \&log_warn;
+
+ my $state = $get_systemd_unit_state->($unit);
+ if ($state eq 'active') {
+ $log_method = \&log_pass;
+ } elsif ($state eq 'inactive') {
+ $log_method = $no_fail_on_inactive ? \&log_warn : \&log_fail;
+ } elsif ($state eq 'failed') {
+ $log_method = \&log_fail;
+ }
+
+ $log_method->("systemd unit '$unit' is in state '$state'");
+};
+
+my $versions;
+my $get_pkg = sub {
+ my ($pkg) = @_;
+
+ $versions = eval { PVE::API2::APT->versions({ node => $nodename }) } if !defined($versions);
+
+ if (!defined($versions)) {
+ my $msg = "unable to retrieve package version information";
+ $msg .= "- $@" if $@;
+ log_fail("$msg");
+ return undef;
+ }
+
+ my $pkgs = [ grep { $_->{Package} eq $pkg } @$versions ];
+ if (!defined $pkgs || $pkgs == 0) {
+ log_fail("unable to determine installed $pkg version.");
+ return undef;
+ } else {
+ return $pkgs->[0];
+ }
+};
+
+sub check_pve_packages {
+ print_header("CHECKING VERSION INFORMATION FOR PVE PACKAGES");
+
+ print "Checking for package updates..\n";
+ my $updates = eval { PVE::API2::APT->list_updates({ node => $nodename }); };
+ if (!defined($updates)) {
+ log_warn("$@") if $@;
+ log_fail("unable to retrieve list of package updates!");
+ } elsif (@$updates > 0) {
+ my $pkgs = join(', ', map { $_->{Package} } @$updates);
+ log_warn("updates for the following packages are available:\n $pkgs");
+ } else {
+ log_pass("all packages up-to-date");
+ }
+
+ print "\nChecking proxmox-ve package version..\n";
+ if (defined(my $proxmox_ve = $get_pkg->('proxmox-ve'))) {
+ # TODO: update to native version for pve8to9
+ my $min_pve_ver = "$min_pve_major.$min_pve_minor-$min_pve_pkgrel";
+
+ my ($maj, $min, $pkgrel) = $proxmox_ve->{OldVersion} =~ m/^(\d+)\.(\d+)[.-](\d+)/;
+
+ if ($maj > $min_pve_major) {
+ log_pass("already upgraded to Proxmox VE " . ($min_pve_major + 1));
+ $upgraded = 1;
+ } elsif ($maj >= $min_pve_major && $min >= $min_pve_minor && $pkgrel >= $min_pve_pkgrel) {
+ log_pass("proxmox-ve package has version >= $min_pve_ver");
+ } else {
+ log_fail("proxmox-ve package is too old, please upgrade to >= $min_pve_ver!");
+ }
+
+ # FIXME: better differentiate between 6.2 from bullseye or bookworm
+ my $kinstalled = 'proxmox-kernel-6.2';
+ if (!$upgraded) {
+ # we got a few that avoided 5.15 in cluster with mixed CPUs, so allow older too
+ $kinstalled = 'pve-kernel-5.15';
+ }
+
+ my $kernel_version_is_expected = sub {
+ my ($version) = @_;
+
+ return $version =~ m/^(?:5\.(?:13|15)|6\.2)/ if !$upgraded;
+
+ if ($version =~ m/^6\.(?:2\.(?:[2-9]\d+|1[6-8]|1\d\d+)|5)[^~]*$/) {
+ return 1;
+ } elsif ($version =~ m/^(\d+).(\d+)[^~]*-pve$/) {
+ return $1 >= 6 && $2 >= 2;
+ }
+ return 0;
+ };
+
+ print "\nChecking running kernel version..\n";
+ my $kernel_ver = $proxmox_ve->{RunningKernel};
+ if (!defined($kernel_ver)) {
+ log_fail("unable to determine running kernel version.");
+ } elsif ($kernel_version_is_expected->($kernel_ver)) {
+ if ($upgraded) {
+ log_pass("running new kernel '$kernel_ver' after upgrade.");
+ } else {
+ log_pass("running kernel '$kernel_ver' is considered suitable for upgrade.");
+ }
+ } elsif ($get_pkg->($kinstalled)) {
+ # with 6.2 kernel being available in both we might want to fine-tune the check?
+ log_warn("a suitable kernel ($kinstalled) is installed, but an unsuitable ($kernel_ver) is booted, missing reboot?!");
+ } else {
+ log_warn("unexpected running and installed kernel '$kernel_ver'.");
+ }
+
+ if ($upgraded && $kernel_version_is_expected->($kernel_ver)) {
+ my $outdated_kernel_meta_pkgs = [];
+ for my $kernel_meta_version ('5.4', '5.11', '5.13', '5.15') {
+ my $pkg = "pve-kernel-${kernel_meta_version}";
+ if ($get_pkg->($pkg)) {
+ push @$outdated_kernel_meta_pkgs, $pkg;
+ }
+ }
+ if (scalar(@$outdated_kernel_meta_pkgs) > 0) {
+ log_info(
+ "Found outdated kernel meta-packages, taking up extra space on boot partitions.\n"
+ ." After a successful upgrade, you can remove them using this command:\n"
+ ." apt remove " . join(' ', $outdated_kernel_meta_pkgs->@*)
+ );
+ }
+ }
+ } else {
+ log_fail("proxmox-ve package not found!");
+ }
+}
+
+
+sub check_storage_health {
+ print_header("CHECKING CONFIGURED STORAGES");
+ my $cfg = PVE::Storage::config();
+
+ my $ctime = time();
+
+ my $info = PVE::Storage::storage_info($cfg);
+
+ for my $storeid (sort keys %$info) {
+ my $d = $info->{$storeid};
+ if ($d->{enabled}) {
+ if ($d->{active}) {
+ log_pass("storage '$storeid' enabled and active.");
+ } else {
+ log_warn("storage '$storeid' enabled but not active!");
+ }
+ } else {
+ log_skip("storage '$storeid' disabled.");
+ }
+ }
+
+ check_storage_content();
+ eval { check_storage_content_dirs() };
+ log_fail("failed to check storage content directories - $@") if $@;
+}
+
+sub check_cluster_corosync {
+ print_header("CHECKING CLUSTER HEALTH/SETTINGS");
+
+ if (!PVE::Corosync::check_conf_exists(1)) {
+ log_skip("standalone node.");
+ return;
+ }
+
+ $log_systemd_unit_state->('pve-cluster.service');
+ $log_systemd_unit_state->('corosync.service');
+
+ if (PVE::Cluster::check_cfs_quorum(1)) {
+ log_pass("Cluster Filesystem is quorate.");
+ } else {
+ log_fail("Cluster Filesystem readonly, lost quorum?!");
+ }
+
+ my $conf = PVE::Cluster::cfs_read_file('corosync.conf');
+ my $conf_nodelist = PVE::Corosync::nodelist($conf);
+ my $node_votes = 0;
+
+ print "\nAnalzying quorum settings and state..\n";
+ if (!defined($conf_nodelist)) {
+ log_fail("unable to retrieve nodelist from corosync.conf");
+ } else {
+ if (grep { $conf_nodelist->{$_}->{quorum_votes} != 1 } keys %$conf_nodelist) {
+ log_warn("non-default quorum_votes distribution detected!");
+ }
+ map { $node_votes += $conf_nodelist->{$_}->{quorum_votes} // 0 } keys %$conf_nodelist;
+ }
+
+ my ($expected_votes, $total_votes);
+ my $filter_output = sub {
+ my $line = shift;
+ ($expected_votes) = $line =~ /^Expected votes:\s*(\d+)\s*$/
+ if !defined($expected_votes);
+ ($total_votes) = $line =~ /^Total votes:\s*(\d+)\s*$/
+ if !defined($total_votes);
+ };
+ eval {
+ run_command(['corosync-quorumtool', '-s'], outfunc => $filter_output, noerr => 1);
+ };
+
+ if (!defined($expected_votes)) {
+ log_fail("unable to get expected number of votes, assuming 0.");
+ $expected_votes = 0;
+ }
+ if (!defined($total_votes)) {
+ log_fail("unable to get expected number of votes, assuming 0.");
+ $total_votes = 0;
+ }
+
+ my $cfs_nodelist = PVE::Cluster::get_clinfo()->{nodelist};
+ my $offline_nodes = grep { $cfs_nodelist->{$_}->{online} != 1 } keys %$cfs_nodelist;
+ if ($offline_nodes > 0) {
+ log_fail("$offline_nodes nodes are offline!");
+ }
+
+ my $qdevice_votes = 0;
+ if (my $qdevice_setup = $conf->{main}->{quorum}->{device}) {
+ $qdevice_votes = $qdevice_setup->{votes} // 1;
+ }
+
+ log_info("configured votes - nodes: $node_votes");
+ log_info("configured votes - qdevice: $qdevice_votes");
+ log_info("current expected votes: $expected_votes");
+ log_info("current total votes: $total_votes");
+
+ log_warn("expected votes set to non-standard value '$expected_votes'.")
+ if $expected_votes != $node_votes + $qdevice_votes;
+ log_warn("total votes < expected votes: $total_votes/$expected_votes!")
+ if $total_votes < $expected_votes;
+
+ my $conf_nodelist_count = scalar(keys %$conf_nodelist);
+ my $cfs_nodelist_count = scalar(keys %$cfs_nodelist);
+ log_warn("cluster consists of less than three quorum-providing nodes!")
+ if $conf_nodelist_count < 3 && $conf_nodelist_count + $qdevice_votes < 3;
+
+ log_fail("corosync.conf ($conf_nodelist_count) and pmxcfs ($cfs_nodelist_count) don't agree about size of nodelist.")
+ if $conf_nodelist_count != $cfs_nodelist_count;
+
+ print "\nChecking nodelist entries..\n";
+ my $nodelist_pass = 1;
+ for my $cs_node (sort keys %$conf_nodelist) {
+ my $entry = $conf_nodelist->{$cs_node};
+ if (!defined($entry->{name})) {
+ $nodelist_pass = 0;
+ log_fail("$cs_node: no name entry in corosync.conf.");
+ }
+ if (!defined($entry->{nodeid})) {
+ $nodelist_pass = 0;
+ log_fail("$cs_node: no nodeid configured in corosync.conf.");
+ }
+ my $gotLinks = 0;
+ for my $link (0..7) {
+ $gotLinks++ if defined($entry->{"ring${link}_addr"});
+ }
+ if ($gotLinks <= 0) {
+ $nodelist_pass = 0;
+ log_fail("$cs_node: no ringX_addr (0 <= X <= 7) link defined in corosync.conf.");
+ }
+
+ my $verify_ring_ip = sub {
+ my $key = shift;
+ if (defined(my $ring = $entry->{$key})) {
+ my ($resolved_ip, undef) = PVE::Corosync::resolve_hostname_like_corosync($ring, $conf);
+ if (defined($resolved_ip)) {
+ if ($resolved_ip ne $ring) {
+ $nodelist_pass = 0;
+ log_warn(
+ "$cs_node: $key '$ring' resolves to '$resolved_ip'.\n"
+ ." Consider replacing it with the currently resolved IP address."
+ );
+ }
+ } else {
+ $nodelist_pass = 0;
+ log_fail(
+ "$cs_node: unable to resolve $key '$ring' to an IP address according to Corosync's"
+ ." resolve strategy - cluster will potentially fail with Corosync 3.x/kronosnet!"
+ );
+ }
+ }
+ };
+ for my $link (0..7) {
+ $verify_ring_ip->("ring${link}_addr");
+ }
+ }
+ log_pass("nodelist settings OK") if $nodelist_pass;
+
+ print "\nChecking totem settings..\n";
+ my $totem = $conf->{main}->{totem};
+ my $totem_pass = 1;
+
+ my $transport = $totem->{transport};
+ if (defined($transport)) {
+ if ($transport ne 'knet') {
+ $totem_pass = 0;
+ log_fail("Corosync transport explicitly set to '$transport' instead of implicit default!");
+ }
+ }
+
+ # TODO: are those values still up-to-date?
+ if ((!defined($totem->{secauth}) || $totem->{secauth} ne 'on') && (!defined($totem->{crypto_cipher}) || $totem->{crypto_cipher} eq 'none')) {
+ $totem_pass = 0;
+ log_fail("Corosync authentication/encryption is not explicitly enabled (secauth / crypto_cipher / crypto_hash)!");
+ } elsif (defined($totem->{crypto_cipher}) && $totem->{crypto_cipher} eq '3des') {
+ $totem_pass = 0;
+ log_fail("Corosync encryption cipher set to '3des', no longer supported in Corosync 3.x!"); # FIXME: can be removed?
+ }
+
+ log_pass("totem settings OK") if $totem_pass;
+ print "\n";
+ log_info("run 'pvecm status' to get detailed cluster status..");
+
+ if (defined(my $corosync = $get_pkg->('corosync'))) {
+ if ($corosync->{OldVersion} =~ m/^2\./) {
+ log_fail("\ncorosync 2.x installed, cluster-wide upgrade to 3.x needed!");
+ } elsif ($corosync->{OldVersion} !~ m/^3\./) {
+ log_fail("\nunexpected corosync version installed: $corosync->{OldVersion}!");
+ }
+ }
+}
+
+sub check_ceph {
+ print_header("CHECKING HYPER-CONVERGED CEPH STATUS");
+
+ if (PVE::Ceph::Tools::check_ceph_inited(1)) {
+ log_info("hyper-converged ceph setup detected!");
+ } else {
+ log_skip("no hyper-converged ceph setup detected!");
+ return;
+ }
+
+ log_info("getting Ceph status/health information..");
+ my $ceph_status = eval { PVE::API2::Ceph->status({ node => $nodename }); };
+ my $noout = eval { PVE::API2::Cluster::Ceph->get_flag({ flag => "noout" }); };
+ if ($@) {
+ log_fail("failed to get 'noout' flag status - $@");
+ }
+
+ my $noout_wanted = 1;
+
+ if (!$ceph_status || !$ceph_status->{health}) {
+ log_fail("unable to determine Ceph status!");
+ } else {
+ my $ceph_health = $ceph_status->{health}->{status};
+ if (!$ceph_health) {
+ log_fail("unable to determine Ceph health!");
+ } elsif ($ceph_health eq 'HEALTH_OK') {
+ log_pass("Ceph health reported as 'HEALTH_OK'.");
+ } elsif ($ceph_health eq 'HEALTH_WARN' && $noout && (keys %{$ceph_status->{health}->{checks}} == 1)) {
+ log_pass("Ceph health reported as 'HEALTH_WARN' with a single failing check and 'noout' flag set.");
+ } else {
+ log_warn(
+ "Ceph health reported as '$ceph_health'.\n Use the PVE dashboard or 'ceph -s'"
+ ." to determine the specific issues and try to resolve them."
+ );
+ }
+ }
+
+ # TODO: check OSD min-required version, if to low it breaks stuff!
+
+ log_info("checking local Ceph version..");
+ if (my $release = eval { PVE::Ceph::Tools::get_local_version(1) }) {
+ my $code_name = $ceph_release2code->{"$release"} || 'unknown';
+ if ($release == $ceph_supported_release) {
+ log_pass("found expected Ceph $ceph_supported_release $ceph_supported_code_name release.")
+ } elsif ($release > $ceph_supported_release) {
+ log_warn(
+ "found newer Ceph release $release $code_name as the expected $ceph_supported_release"
+ ." $ceph_supported_code_name, installed third party repos?!"
+ )
+ } else {
+ log_fail(
+ "Hyper-converged Ceph $release $code_name is to old for upgrade!\n"
+ ." Upgrade Ceph first to $ceph_supported_code_name following our how-to:\n"
+ ." <https://pve.proxmox.com/wiki/Category:Ceph_Upgrade>"
+ );
+ }
+ } else {
+ log_fail("unable to determine local Ceph version!");
+ }
+
+ log_info("getting Ceph daemon versions..");
+ my $ceph_versions = eval { PVE::Ceph::Tools::get_cluster_versions(undef, 1); };
+ if (!$ceph_versions) {
+ log_fail("unable to determine Ceph daemon versions!");
+ } else {
+ my $services = [
+ { 'key' => 'mon', 'name' => 'monitor' },
+ { 'key' => 'mgr', 'name' => 'manager' },
+ { 'key' => 'mds', 'name' => 'MDS' },
+ { 'key' => 'osd', 'name' => 'OSD' },
+ ];
+
+ my $ceph_versions_simple = {};
+ my $ceph_versions_commits = {};
+ for my $type (keys %$ceph_versions) {
+ for my $full_version (keys $ceph_versions->{$type}->%*) {
+ if ($full_version =~ m/^(.*) \((.*)\).*\(.*\)$/) {
+ # String is in the form of
+ # ceph version 17.2.6 (810db68029296377607028a6c6da1ec06f5a2b27) quincy (stable)
+ # only check the first part, e.g. 'ceph version 17.2.6', the commit hash can
+ # be different
+ $ceph_versions_simple->{$type}->{$1} = 1;
+ $ceph_versions_commits->{$type}->{$2} = 1;
+ }
+ }
+ }
+
+ for my $service (@$services) {
+ my ($name, $key) = $service->@{'name', 'key'};
+ if (my $service_versions = $ceph_versions_simple->{$key}) {
+ if (keys %$service_versions == 0) {
+ log_skip("no running instances detected for daemon type $name.");
+ } elsif (keys %$service_versions == 1) {
+ log_pass("single running version detected for daemon type $name.");
+ } else {
+ log_warn("multiple running versions detected for daemon type $name!");
+ }
+ } else {
+ log_skip("unable to determine versions of running Ceph $name instances.");
+ }
+ my $service_commits = $ceph_versions_commits->{$key};
+ log_info("different builds of same version detected for an $name. Are you in the middle of the upgrade?")
+ if $service_commits && keys %$service_commits > 1;
+ }
+
+ my $overall_versions = $ceph_versions->{overall};
+ if (!$overall_versions) {
+ log_warn("unable to determine overall Ceph daemon versions!");
+ } elsif (keys %$overall_versions == 1) {
+ log_pass("single running overall version detected for all Ceph daemon types.");
+ $noout_wanted = !$upgraded; # off post-upgrade, on pre-upgrade
+ } elsif (keys $ceph_versions_simple->{overall}->%* != 1) {
+ log_warn("overall version mismatch detected, check 'ceph versions' output for details!");
+ }
+ }
+
+ if ($noout) {
+ if ($noout_wanted) {
+ log_pass("'noout' flag set to prevent rebalancing during cluster-wide upgrades.");
+ } else {
+ log_warn("'noout' flag set, Ceph cluster upgrade seems finished.");
+ }
+ } elsif ($noout_wanted) {
+ log_warn("'noout' flag not set - recommended to prevent rebalancing during upgrades.");
+ }
+
+ log_info("checking Ceph config..");
+ my $conf = PVE::Cluster::cfs_read_file('ceph.conf');
+ if (%$conf) {
+ my $global = $conf->{global};
+
+ my $global_monhost = $global->{mon_host} // $global->{"mon host"} // $global->{"mon-host"};
+ if (!defined($global_monhost)) {
+ log_warn(
+ "No 'mon_host' entry found in ceph config.\n It's recommended to add mon_host with"
+ ." all monitor addresses (without ports) to the global section."
+ );
+ }
+
+ my $ipv6 = $global->{ms_bind_ipv6} // $global->{"ms bind ipv6"} // $global->{"ms-bind-ipv6"};
+ if ($ipv6) {
+ my $ipv4 = $global->{ms_bind_ipv4} // $global->{"ms bind ipv4"} // $global->{"ms-bind-ipv4"};
+ if ($ipv6 eq 'true' && (!defined($ipv4) || $ipv4 ne 'false')) {
+ log_warn(
+ "'ms_bind_ipv6' is enabled but 'ms_bind_ipv4' is not disabled.\n Make sure to"
+ ." disable 'ms_bind_ipv4' for ipv6 only clusters, or add an ipv4 network to public/cluster network."
+ );
+ }
+ }
+
+ if (defined($global->{keyring})) {
+ log_warn(
+ "[global] config section contains 'keyring' option, which will prevent services from"
+ ." starting with Nautilus.\n Move 'keyring' option to [client] section instead."
+ );
+ }
+
+ } else {
+ log_warn("Empty ceph config found");
+ }
+
+ my $local_ceph_ver = PVE::Ceph::Tools::get_local_version(1);
+ if (defined($local_ceph_ver)) {
+ if ($local_ceph_ver <= 14) {
+ log_fail("local Ceph version too low, at least Octopus required..");
+ }
+ } else {
+ log_fail("unable to determine local Ceph version.");
+ }
+}
+
+sub check_backup_retention_settings {
+ log_info("Checking backup retention settings..");
+
+ my $pass = 1;
+
+ my $maxfiles_msg = "parameter 'maxfiles' is deprecated with PVE 7.x and will be removed in a " .
+ "future version, use 'prune-backups' instead.";
+
+ eval {
+ my $confdesc = PVE::VZDump::Common::get_confdesc();
+ # vzdump.conf by itself doesn't need to honor any 'requires'
+ delete $confdesc->{$_}->{requires} for keys $confdesc->%*;
+
+ my $fn = "/etc/vzdump.conf";
+ my $raw = PVE::Tools::file_get_contents($fn);
+
+ my $conf_schema = { type => 'object', properties => $confdesc, };
+ my $param = PVE::JSONSchema::parse_config($conf_schema, $fn, $raw);
+
+ if (defined($param->{maxfiles})) {
+ $pass = 0;
+ log_warn("$fn - $maxfiles_msg");
+ }
+ };
+ if (my $err = $@) {
+ $pass = 0;
+ log_warn("unable to parse node's VZDump configuration - $err");
+ }
+
+ my $storage_cfg = PVE::Storage::config();
+
+ for my $storeid (keys $storage_cfg->{ids}->%*) {
+ my $scfg = $storage_cfg->{ids}->{$storeid};
+
+ if (defined($scfg->{maxfiles})) {
+ $pass = 0;
+ log_warn("storage '$storeid' - $maxfiles_msg");
+ }
+ }
+
+ eval {
+ my $vzdump_cron = PVE::Cluster::cfs_read_file('vzdump.cron');
+
+ # only warn once, there might be many jobs...
+ if (scalar(grep { defined($_->{maxfiles}) } $vzdump_cron->{jobs}->@*)) {
+ $pass = 0;
+ log_warn("/etc/pve/vzdump.cron - $maxfiles_msg");
+ }
+ };
+ if (my $err = $@) {
+ $pass = 0;
+ log_warn("unable to parse node's VZDump configuration - $err");
+ }
+
+ log_pass("no backup retention problems found.") if $pass;
+}
+
+sub check_cifs_credential_location {
+ log_info("checking CIFS credential location..");
+
+ my $regex = qr/^(.*)\.cred$/;
+
+ my $found;
+
+ PVE::Tools::dir_glob_foreach('/etc/pve/priv/', $regex, sub {
+ my ($filename) = @_;
+
+ my ($basename) = $filename =~ $regex;
+
+ log_warn(
+ "CIFS credentials '/etc/pve/priv/$filename' will be moved to"
+ ." '/etc/pve/priv/storage/$basename.pw' during the update"
+ );
+
+ $found = 1;
+ });
+
+ log_pass("no CIFS credentials at outdated location found.") if !$found;
+}
+
+sub check_custom_pool_roles {
+ log_info("Checking permission system changes..");
+
+ if (! -f "/etc/pve/user.cfg") {
+ log_skip("user.cfg does not exist");
+ return;
+ }
+
+ my $raw = eval { PVE::Tools::file_get_contents('/etc/pve/user.cfg'); };
+ if ($@) {
+ log_fail("Failed to read '/etc/pve/user.cfg' - $@");
+ return;
+ }
+
+ my $roles = {};
+ while ($raw =~ /^\s*(.+?)\s*$/gm) {
+ my $line = $1;
+ my @data;
+
+ for my $d (split (/:/, $line)) {
+ $d =~ s/^\s+//;
+ $d =~ s/\s+$//;
+ push @data, $d
+ }
+
+ my $et = shift @data;
+ if ($et eq 'role') {
+ my ($role, $privlist) = @data;
+ if (!PVE::AccessControl::verify_rolename($role, 1)) {
+ warn "user config - ignore role '$role' - invalid characters in role name\n";
+ next;
+ }
+
+ $roles->{$role} = {} if !$roles->{$role};
+ for my $priv (split_list($privlist)) {
+ $roles->{$role}->{$priv} = 1;
+ }
+ } elsif ($et eq 'acl') {
+ my ($propagate, $pathtxt, $uglist, $rolelist) = @data;
+ for my $role (split_list($rolelist)) {
+ if ($role eq 'PVESysAdmin' || $role eq 'PVEAdmin') {
+ log_warn(
+ "found ACL entry on '$pathtxt' for '$uglist' with role '$role' - this role"
+ ." will no longer have 'Permissions.Modify' after the upgrade!"
+ );
+ }
+ }
+ }
+ }
+
+ log_info("Checking custom role IDs for clashes with new 'PVE' namespace..");
+ my ($custom_roles, $pve_namespace_clashes) = (0, 0);
+ for my $role (sort keys %{$roles}) {
+ next if PVE::AccessControl::role_is_special($role);
+ $custom_roles++;
+
+ if ($role =~ /^PVE/i) {
+ log_warn("custom role '$role' clashes with 'PVE' namespace for built-in roles");
+ $pve_namespace_clashes++;
+ }
+ }
+ if ($pve_namespace_clashes > 0) {
+ log_fail("$pve_namespace_clashes custom role(s) will clash with 'PVE' namespace for built-in roles enforced in Proxmox VE 8");
+ } elsif ($custom_roles > 0) {
+ log_pass("none of the $custom_roles custom roles will clash with newly enforced 'PVE' namespace")
+ } else {
+ log_pass("no custom roles defined, so no clash with 'PVE' role ID namespace enforced in Proxmox VE 8")
+ }
+}
+
+my sub check_max_length {
+ my ($raw, $max_length, $warning) = @_;
+ log_warn($warning) if defined($raw) && length($raw) > $max_length;
+}
+
+sub check_node_and_guest_configurations {
+ log_info("Checking node and guest description/note length..");
+
+ my @affected_nodes = grep {
+ my $desc = PVE::NodeConfig::load_config($_)->{desc};
+ defined($desc) && length($desc) > 64 * 1024
+ } PVE::Cluster::get_nodelist();
+
+ if (scalar(@affected_nodes) > 0) {
+ log_warn("Node config description of the following nodes too long for new limit of 64 KiB:\n "
+ . join(', ', @affected_nodes));
+ } else {
+ log_pass("All node config descriptions fit in the new limit of 64 KiB");
+ }
+
+ my $affected_guests_long_desc = [];
+ my $affected_cts_cgroup_keys = [];
+
+ my $cts = PVE::LXC::config_list();
+ for my $vmid (sort { $a <=> $b } keys %$cts) {
+ my $conf = PVE::LXC::Config->load_config($vmid);
+
+ my $desc = $conf->{description};
+ push @$affected_guests_long_desc, "CT $vmid" if defined($desc) && length($desc) > 8 * 1024;
+
+ my $lxc_raw_conf = $conf->{lxc};
+ push @$affected_cts_cgroup_keys, "CT $vmid" if (grep (@$_[0] =~ /^lxc\.cgroup\./, @$lxc_raw_conf));
+ }
+ my $vms = PVE::QemuServer::config_list();
+ for my $vmid (sort { $a <=> $b } keys %$vms) {
+ my $desc = PVE::QemuConfig->load_config($vmid)->{description};
+ push @$affected_guests_long_desc, "VM $vmid" if defined($desc) && length($desc) > 8 * 1024;
+ }
+ if (scalar($affected_guests_long_desc->@*) > 0) {
+ log_warn("Guest config description of the following virtual-guests too long for new limit of 64 KiB:\n"
+ ." " . join(", ", $affected_guests_long_desc->@*));
+ } else {
+ log_pass("All guest config descriptions fit in the new limit of 8 KiB");
+ }
+
+ log_info("Checking container configs for deprecated lxc.cgroup entries");
+
+ if (scalar($affected_cts_cgroup_keys->@*) > 0) {
+ if ($forced_legacy_cgroup) {
+ log_pass("Found legacy 'lxc.cgroup' keys, but system explicitly configured for legacy hybrid cgroup hierarchy.");
+ } else {
+ log_warn("The following CTs have 'lxc.cgroup' keys configured, which will be ignored in the new default unified cgroupv2:\n"
+ ." " . join(", ", $affected_cts_cgroup_keys->@*) ."\n"
+ ." Often it can be enough to change to the new 'lxc.cgroup2' prefix after the upgrade to Proxmox VE 7.x");
+ }
+ } else {
+ log_pass("No legacy 'lxc.cgroup' keys found.");
+ }
+}
+
+sub check_storage_content {
+ log_info("Checking storage content type configuration..");
+
+ my $found;
+ my $pass = 1;
+
+ my $storage_cfg = PVE::Storage::config();
+
+ for my $storeid (sort keys $storage_cfg->{ids}->%*) {
+ my $scfg = $storage_cfg->{ids}->{$storeid};
+
+ next if $scfg->{shared};
+ next if !PVE::Storage::storage_check_enabled($storage_cfg, $storeid, undef, 1);
+
+ my $valid_content = PVE::Storage::Plugin::valid_content_types($scfg->{type});
+
+ if (scalar(keys $scfg->{content}->%*) == 0 && !$valid_content->{none}) {
+ $pass = 0;
+ log_fail("storage '$storeid' does not support configured content type 'none'");
+ delete $scfg->{content}->{none}; # scan for guest images below
+ }
+
+ next if $scfg->{content}->{images};
+ next if $scfg->{content}->{rootdir};
+
+ # Skip 'iscsi(direct)' (and foreign plugins with potentially similar behavior) with 'none',
+ # because that means "use LUNs directly" and vdisk_list() in PVE 6.x still lists those.
+ # It's enough to *not* skip 'dir', because it is the only other storage that supports 'none'
+ # and 'images' or 'rootdir', hence being potentially misconfigured.
+ next if $scfg->{type} ne 'dir' && $scfg->{content}->{none};
+
+ eval { PVE::Storage::activate_storage($storage_cfg, $storeid) };
+ if (my $err = $@) {
+ log_warn("activating '$storeid' failed - $err");
+ next;
+ }
+
+ my $res = eval { PVE::Storage::vdisk_list($storage_cfg, $storeid); };
+ if (my $err = $@) {
+ log_warn("listing images on '$storeid' failed - $err");
+ next;
+ }
+ my @volids = map { $_->{volid} } $res->{$storeid}->@*;
+
+ my $number = scalar(@volids);
+ if ($number > 0) {
+ log_info(
+ "storage '$storeid' - neither content type 'images' nor 'rootdir' configured, but"
+ ."found $number guest volume(s)"
+ );
+ }
+ }
+
+ my $check_volid = sub {
+ my ($volid, $vmid, $vmtype, $reference) = @_;
+
+ my $guesttext = $vmtype eq 'qemu' ? 'VM' : 'CT';
+ my $prefix = "$guesttext $vmid - volume '$volid' ($reference)";
+
+ my ($storeid) = PVE::Storage::parse_volume_id($volid, 1);
+ return if !defined($storeid);
+
+ my $scfg = $storage_cfg->{ids}->{$storeid};
+ if (!$scfg) {
+ $pass = 0;
+ log_warn("$prefix - storage does not exist!");
+ return;
+ }
+
+ # cannot use parse_volname for containers, as it can return 'images'
+ # but containers cannot have ISO images attached, so assume 'rootdir'
+ my $vtype = 'rootdir';
+ if ($vmtype eq 'qemu') {
+ ($vtype) = eval { PVE::Storage::parse_volname($storage_cfg, $volid); };
+ return if $@;
+ }
+
+ if (!$scfg->{content}->{$vtype}) {
+ $found = 1;
+ $pass = 0;
+ log_warn("$prefix - storage does not have content type '$vtype' configured.");
+ }
+ };
+
+ my $cts = PVE::LXC::config_list();
+ for my $vmid (sort { $a <=> $b } keys %$cts) {
+ my $conf = PVE::LXC::Config->load_config($vmid);
+
+ my $volhash = {};
+
+ my $check = sub {
+ my ($ms, $mountpoint, $reference) = @_;
+
+ my $volid = $mountpoint->{volume};
+ return if !$volid || $mountpoint->{type} ne 'volume';
+
+ return if $volhash->{$volid}; # volume might be referenced multiple times
+
+ $volhash->{$volid} = 1;
+
+ $check_volid->($volid, $vmid, 'lxc', $reference);
+ };
+
+ my $opts = { include_unused => 1 };
+ PVE::LXC::Config->foreach_volume_full($conf, $opts, $check, 'in config');
+ for my $snapname (keys $conf->{snapshots}->%*) {
+ my $snap = $conf->{snapshots}->{$snapname};
+ PVE::LXC::Config->foreach_volume_full($snap, $opts, $check, "in snapshot '$snapname'");
+ }
+ }
+
+ my $vms = PVE::QemuServer::config_list();
+ for my $vmid (sort { $a <=> $b } keys %$vms) {
+ my $conf = PVE::QemuConfig->load_config($vmid);
+
+ my $volhash = {};
+
+ my $check = sub {
+ my ($key, $drive, $reference) = @_;
+
+ my $volid = $drive->{file};
+ return if $volid =~ m|^/|;
+ return if $volhash->{$volid}; # volume might be referenced multiple times
+
+ $volhash->{$volid} = 1;
+ $check_volid->($volid, $vmid, 'qemu', $reference);
+ };
+
+ my $opts = {
+ extra_keys => ['vmstate'],
+ include_unused => 1,
+ };
+ # startup from a suspended state works even without 'images' content type on the
+ # state storage, so do not check 'vmstate' for $conf
+ PVE::QemuConfig->foreach_volume_full($conf, { include_unused => 1 }, $check, 'in config');
+ for my $snapname (keys $conf->{snapshots}->%*) {
+ my $snap = $conf->{snapshots}->{$snapname};
+ PVE::QemuConfig->foreach_volume_full($snap, $opts, $check, "in snapshot '$snapname'");
+ }
+ }
+
+ if ($found) {
+ log_warn("Proxmox VE enforces stricter content type checks since 7.0. The guests above " .
+ "might not work until the storage configuration is fixed.");
+ }
+
+ if ($pass) {
+ log_pass("no storage content problems found");
+ }
+}
+
+sub check_storage_content_dirs {
+ my $storage_cfg = PVE::Storage::config();
+
+ # check that content dirs are pairwise inequal
+ my $any_problematic = 0;
+ for my $storeid (sort keys $storage_cfg->{ids}->%*) {
+ my $scfg = $storage_cfg->{ids}->{$storeid};
+
+ next if !PVE::Storage::storage_check_enabled($storage_cfg, $storeid, undef, 1);
+ next if !$scfg->{path} || !$scfg->{content};
+
+ eval { PVE::Storage::activate_storage($storage_cfg, $storeid) };
+ if (my $err = $@) {
+ log_warn("activating '$storeid' failed - $err");
+ next;
+ }
+
+ my $resolved_subdirs = {};
+ my $plugin = PVE::Storage::Plugin->lookup($scfg->{type});
+ for my $vtype (keys $scfg->{content}->%*) {
+ my $abs_subdir = Cwd::abs_path($plugin->get_subdir($scfg, $vtype));
+ next if !defined($abs_subdir);
+ push $resolved_subdirs->{$abs_subdir}->@*, $vtype;
+ }
+ for my $subdir (keys $resolved_subdirs->%*) {
+ if (scalar($resolved_subdirs->{$subdir}->@*) > 1) {
+ my $types = join(", ", $resolved_subdirs->{$subdir}->@*);
+ log_warn("storage '$storeid' uses directory $subdir for multiple content types ($types).");
+ $any_problematic = 1;
+ }
+ }
+ }
+ if ($any_problematic) {
+ log_fail("re-using directory for multiple content types (see above) is no longer supported in Proxmox VE 8!")
+ } else {
+ log_pass("no storage re-uses a directory for multiple content types.")
+ }
+}
+
+sub check_containers_cgroup_compat {
+ if ($forced_legacy_cgroup) {
+ log_warn("System explicitly configured for legacy hybrid cgroup hierarchy.\n"
+ ." NOTE: support for the hybrid cgroup hierarchy will be removed in future Proxmox VE 9 (~ 2025)."
+ );
+ }
+
+ my $supports_cgroupv2 = sub {
+ my ($conf, $rootdir, $ctid) = @_;
+
+ my $get_systemd_version = sub {
+ my ($self) = @_;
+
+ my @dirs = (
+ '/lib/systemd',
+ '/usr/lib/systemd',
+ '/usr/lib/x86_64-linux-gnu/systemd',
+ '/usr/lib64/systemd'
+ );
+ my $libsd;
+ for my $dir (@dirs) {
+ $libsd = PVE::Tools::dir_glob_regex($dir, "libsystemd-shared-.+\.so");
+ last if defined($libsd);
+ }
+ if (defined($libsd) && $libsd =~ /libsystemd-shared-(\d+)(\.\d-\d)?(\.fc\d\d)?\.so/) {
+ return $1;
+ }
+
+ return undef;
+ };
+
+ my $unified_cgroupv2_support = sub {
+ my ($self) = @_;
+
+ # https://www.freedesktop.org/software/systemd/man/systemd.html
+ # systemd is installed as symlink to /sbin/init
+ my $systemd = CORE::readlink('/sbin/init');
+
+ # assume non-systemd init will run with unified cgroupv2
+ if (!defined($systemd) || $systemd !~ m@/systemd$@) {
+ return 1;
+ }
+
+ # systemd version 232 (e.g. debian stretch) supports the unified hierarchy
+ my $sdver = $get_systemd_version->();
+ if (!defined($sdver) || $sdver < 232) {
+ return 0;
+ }
+
+ return 1;
+ };
+
+ my $ostype = $conf->{ostype};
+ if (!defined($ostype)) {
+ log_warn("Found CT ($ctid) without 'ostype' set!");
+ } elsif ($ostype eq 'devuan' || $ostype eq 'alpine') {
+ return 1; # no systemd, no cgroup problems
+ }
+
+ my $lxc_setup = PVE::LXC::Setup->new($conf, $rootdir);
+ return $lxc_setup->protected_call($unified_cgroupv2_support);
+ };
+
+ my $log_problem = sub {
+ my ($ctid) = @_;
+ my $extra = $forced_legacy_cgroup ? '' : " or set systemd.unified_cgroup_hierarchy=0 in the Proxmox VE hosts' kernel cmdline";
+ log_warn(
+ "Found at least one CT ($ctid) which does not support running in a unified cgroup v2 layout\n"
+ ." Consider upgrading the Containers distro${extra}! Skipping further CT compat checks."
+ );
+ };
+
+ my $cts = eval { PVE::API2::LXC->vmlist({ node => $nodename }) };
+ if ($@) {
+ log_warn("Failed to retrieve information about this node's CTs - $@");
+ return;
+ }
+
+ if (!defined($cts) || !scalar(@$cts)) {
+ log_skip("No containers on node detected.");
+ return;
+ }
+
+ my @running_cts = sort { $a <=> $b } grep { $_->{status} eq 'running' } @$cts;
+ my @offline_cts = sort { $a <=> $b } grep { $_->{status} ne 'running' } @$cts;
+
+ for my $ct (@running_cts) {
+ my $ctid = $ct->{vmid};
+ my $pid = eval { PVE::LXC::find_lxc_pid($ctid) };
+ if (my $err = $@) {
+ log_warn("Failed to get PID for running CT $ctid - $err");
+ next;
+ }
+ my $rootdir = "/proc/$pid/root";
+ my $conf = PVE::LXC::Config->load_config($ctid);
+
+ my $ret = eval { $supports_cgroupv2->($conf, $rootdir, $ctid) };
+ if (my $err = $@) {
+ log_warn("Failed to get cgroup support status for CT $ctid - $err");
+ next;
+ }
+ if (!$ret) {
+ $log_problem->($ctid);
+ return;
+ }
+ }
+
+ my $storage_cfg = PVE::Storage::config();
+ for my $ct (@offline_cts) {
+ my $ctid = $ct->{vmid};
+ my ($conf, $rootdir, $ret);
+ eval {
+ $conf = PVE::LXC::Config->load_config($ctid);
+ $rootdir = PVE::LXC::mount_all($ctid, $storage_cfg, $conf);
+ $ret = $supports_cgroupv2->($conf, $rootdir, $ctid);
+ };
+ if (my $err = $@) {
+ log_warn("Failed to load config and mount CT $ctid - $err");
+ eval { PVE::LXC::umount_all($ctid, $storage_cfg, $conf) };
+ next;
+ }
+ if (!$ret) {
+ $log_problem->($ctid);
+ eval { PVE::LXC::umount_all($ctid, $storage_cfg, $conf) };
+ last;
+ }
+
+ eval { PVE::LXC::umount_all($ctid, $storage_cfg, $conf) };
+ }
+};
+
+sub check_lxcfs_fuse_version {
+ log_info("Checking if LXCFS is running with FUSE3 library, if already upgraded..");
+ if (!$upgraded) {
+ log_skip("not yet upgraded, no need to check the FUSE library version LXCFS uses");
+ return;
+ }
+
+ my $lxcfs_pid = eval { file_get_contents('/run/lxcfs.pid') };
+ if (my $err = $@) {
+ log_fail("failed to get LXCFS pid - $err");
+ return;
+ }
+ chomp $lxcfs_pid;
+
+ my $lxcfs_maps = eval { file_get_contents("/proc/${lxcfs_pid}/maps") };
+ if (my $err = $@) {
+ log_fail("failed to get LXCFS maps - $err");
+ return;
+ }
+
+ if ($lxcfs_maps =~ /\/libfuse.so.2/s) {
+ log_warn("systems seems to be upgraded but LXCFS is still running with FUSE 2 library, not yet rebooted?")
+ } elsif ($lxcfs_maps =~ /\/libfuse3.so.3/s) {
+ log_pass("systems seems to be upgraded and LXCFS is running with FUSE 3 library")
+ }
+ return;
+}
+
+sub check_apt_repos {
+ log_info("Checking if the suite for the Debian security repository is correct..");
+
+ my $found = 0;
+
+ my $dir = '/etc/apt/sources.list.d';
+ my $in_dir = 0;
+
+ # TODO: check that (original) debian and Proxmox VE mirrors are present.
+
+ my ($found_suite, $found_suite_where);
+ my ($mismatches, $strange_suites);
+
+ my $check_file = sub {
+ my ($file) = @_;
+
+ $file = "${dir}/${file}" if $in_dir;
+
+ my $raw = eval { PVE::Tools::file_get_contents($file) };
+ return if !defined($raw);
+ my @lines = split(/\n/, $raw);
+
+ my $number = 0;
+ for my $line (@lines) {
+ $number++;
+
+ next if length($line) == 0; # split would result in undef then...
+
+ ($line) = split(/#/, $line);
+
+ next if $line !~ m/^deb[[:space:]]/; # is case sensitive
+
+ my $suite;
+ if ($line =~ m|deb\s+\w+://\S+\s+(\S*)|i) {
+ $suite = $1;
+ } else {
+ next;
+ }
+ my $where = "in ${file}:${number}";
+
+ $suite =~ s/-(?:(?:proposed-)?updates|backports|debug|security)(?:-debug)?$//;
+ if ($suite ne $old_suite && $suite ne $new_suite && !$older_suites->{$suite}) {
+ push $strange_suites->@*, { suite => $suite, where => $where };
+ next;
+ }
+
+ if (!defined($found_suite)) {
+ $found_suite = $suite;
+ $found_suite_where = $where;
+ } elsif ($suite ne $found_suite) {
+ if (!defined($mismatches)) {
+ $mismatches = [];
+ push $mismatches->@*,
+ { suite => $found_suite, where => $found_suite_where},
+ { suite => $suite, where => $where};
+ } else {
+ push $mismatches->@*, { suite => $suite, where => $where};
+ }
+ }
+ }
+ };
+
+ $check_file->("/etc/apt/sources.list");
+
+ $in_dir = 1;
+
+ PVE::Tools::dir_glob_foreach($dir, '^.*\.list$', $check_file);
+
+ if ($strange_suites) {
+ my @strange_list = map { "found suite $_->{suite} at $_->{where}" } $strange_suites->@*;
+ log_notice(
+ "found unusual suites that are neither old '$old_suite' nor new '$new_suite':"
+ ."\n " . join("\n ", @strange_list)
+ ."\n Please ensure these repositories are shipping compatible packages for the upgrade!"
+ );
+ }
+ if (defined($mismatches)) {
+ my @mismatch_list = map { "found suite $_->{suite} at $_->{where}" } $mismatches->@*;
+
+ log_fail(
+ "Found mixed old and new package repository suites, fix before upgrading! Mismatches:"
+ ."\n " . join("\n ", @mismatch_list)
+ ."\n Configure the same base-suite for all Proxmox and Debian provided repos and ask"
+ ." original vendor for any third-party repos."
+ ."\n E.g., for the upgrade to Proxmox VE ".($min_pve_major + 1)." use the '$new_suite' suite."
+ );
+ } elsif (defined($strange_suites)) {
+ log_notice("found no suite mismatches, but found at least one strange suite");
+ } else {
+ log_pass("found no suite mismatch");
+ }
+}
+
+sub check_nvidia_vgpu_service {
+ log_info("Checking for existence of NVIDIA vGPU Manager..");
+
+ my $msg = "NVIDIA vGPU Service found, possibly not compatible with newer kernel versions, check"
+ ." with their documentation and https://pve.proxmox.com/wiki/Upgrade_from_7_to_8#Known_upgrade_issues.";
+
+ my $state = $get_systemd_unit_state->("nvidia-vgpu-mgr.service", 1);
+ if ($state && $state eq 'active') {
+ log_warn("Running $msg");
+ } elsif ($state && $state ne 'unknown') {
+ log_warn($msg);
+ } else {
+ log_pass("No NVIDIA vGPU Service found.");
+ }
+}
+
+sub check_time_sync {
+ my $unit_active = sub { return $get_systemd_unit_state->($_[0], 1) eq 'active' ? $_[0] : undef };
+
+ log_info("Checking for supported & active NTP service..");
+ if ($unit_active->('systemd-timesyncd.service')) {
+ log_warn(
+ "systemd-timesyncd is not the best choice for time-keeping on servers, due to only applying"
+ ." updates on boot.\n While not necessary for the upgrade it's recommended to use one of:\n"
+ ." * chrony (Default in new Proxmox VE installations)\n * ntpsec\n * openntpd\n"
+ );
+ } elsif ($unit_active->('ntp.service')) {
+ log_info("Debian deprecated and removed the ntp package for Bookworm, but the system"
+ ." will automatically migrate to the 'ntpsec' replacement package on upgrade.");
+ } elsif (my $active_ntp = ($unit_active->('chrony.service') || $unit_active->('openntpd.service') || $unit_active->('ntpsec.service'))) {
+ log_pass("Detected active time synchronisation unit '$active_ntp'");
+ } else {
+ log_warn(
+ "No (active) time synchronisation daemon (NTP) detected, but synchronized systems are important,"
+ ." especially for cluster and/or ceph!"
+ );
+ }
+}
+
+sub check_bootloader {
+ log_info("Checking bootloader configuration...");
+
+ if (! -d '/sys/firmware/efi') {
+ log_skip("System booted in legacy-mode - no need for additional packages");
+ return;
+ }
+
+ if ( -f "/etc/kernel/proxmox-boot-uuids") {
+ if (!$upgraded) {
+ log_skip("not yet upgraded, no need to check the presence of systemd-boot");
+ return;
+ }
+ if ( -f "/usr/share/doc/systemd-boot/changelog.Debian.gz") {
+ log_pass("bootloader packages installed correctly");
+ return;
+ }
+ log_warn(
+ "proxmox-boot-tool is used for bootloader configuration in uefi mode"
+ . " but the separate systemd-boot package is not installed,"
+ . " initializing new ESPs will not work until the package is installed"
+ );
+ return;
+ } elsif ( ! -f "/usr/share/doc/grub-efi-amd64/changelog.Debian.gz" ) {
+ log_warn(
+ "System booted in uefi mode but grub-efi-amd64 meta-package not installed,"
+ . " new grub versions will not be installed to /boot/efi!"
+ . " Install grub-efi-amd64."
+ );
+ return;
+ } else {
+ log_pass("bootloader packages installed correctly");
+ }
+}
+
+sub check_dkms_modules {
+ log_info("Check for dkms modules...");
+
+ my $count;
+ my $set_count = sub {
+ $count = scalar @_;
+ };
+
+ my $sig_pipe = $SIG{PIPE};
+ $SIG{PIPE} = "DEFAULT";
+ my $exit_code = eval {
+ run_command(['dkms', 'status', '-k', '`uname -r`'], outfunc => $set_count, noerr => 1)
+ };
+ $SIG{PIPE} = $sig_pipe;
+
+ if ($exit_code != 0) {
+ log_skip("could not get dkms status");
+ } elsif (!$count) {
+ log_pass("no dkms modules found");
+ } else {
+ log_warn("dkms modules found, this might cause issues during upgrade.");
+ }
+}
+
+sub check_misc {
+ print_header("MISCELLANEOUS CHECKS");
+ my $ssh_config = eval { PVE::Tools::file_get_contents('/root/.ssh/config') };
+ if (defined($ssh_config)) {
+ log_fail("Unsupported SSH Cipher configured for root in /root/.ssh/config: $1")
+ if $ssh_config =~ /^Ciphers .*(blowfish|arcfour|3des).*$/m;
+ } else {
+ log_skip("No SSH config file found.");
+ }
+
+ log_info("Checking common daemon services..");
+ $log_systemd_unit_state->('pveproxy.service');
+ $log_systemd_unit_state->('pvedaemon.service');
+ $log_systemd_unit_state->('pvescheduler.service');
+ $log_systemd_unit_state->('pvestatd.service');
+
+ check_time_sync();
+
+ my $root_free = PVE::Tools::df('/', 10);
+ log_warn("Less than 5 GB free space on root file system.")
+ if defined($root_free) && $root_free->{avail} < 5 * 1000*1000*1000;
+
+ log_info("Checking for running guests..");
+ my $running_guests = 0;
+
+ my $vms = eval { PVE::API2::Qemu->vmlist({ node => $nodename }) };
+ log_warn("Failed to retrieve information about this node's VMs - $@") if $@;
+ $running_guests += grep { $_->{status} eq 'running' } @$vms if defined($vms);
+
+ my $cts = eval { PVE::API2::LXC->vmlist({ node => $nodename }) };
+ log_warn("Failed to retrieve information about this node's CTs - $@") if $@;
+ $running_guests += grep { $_->{status} eq 'running' } @$cts if defined($cts);
+
+ if ($running_guests > 0) {
+ log_warn("$running_guests running guest(s) detected - consider migrating or stopping them.")
+ } else {
+ log_pass("no running guest detected.")
+ }
+
+ log_info("Checking if the local node's hostname '$nodename' is resolvable..");
+ my $local_ip = eval { PVE::Network::get_ip_from_hostname($nodename) };
+ if ($@) {
+ log_warn("Failed to resolve hostname '$nodename' to IP - $@");
+ } else {
+ log_info("Checking if resolved IP is configured on local node..");
+ my $cidr = Net::IP::ip_is_ipv6($local_ip) ? "$local_ip/128" : "$local_ip/32";
+ my $configured_ips = PVE::Network::get_local_ip_from_cidr($cidr);
+ my $ip_count = scalar(@$configured_ips);
+
+ if ($ip_count <= 0) {
+ log_fail("Resolved node IP '$local_ip' not configured or active for '$nodename'");
+ } elsif ($ip_count > 1) {
+ log_warn("Resolved node IP '$local_ip' active on multiple ($ip_count) interfaces!");
+ } else {
+ log_pass("Resolved node IP '$local_ip' configured and active on single interface.");
+ }
+ }
+
+ log_info("Check node certificate's RSA key size");
+ my $certs = PVE::API2::Certificates->info({ node => $nodename });
+ my $certs_check = {
+ 'rsaEncryption' => {
+ minsize => 2048,
+ name => 'RSA',
+ },
+ 'id-ecPublicKey' => {
+ minsize => 224,
+ name => 'ECC',
+ },
+ };
+
+ my $certs_check_failed = 0;
+ for my $cert (@$certs) {
+ my ($type, $size, $fn) = $cert->@{qw(public-key-type public-key-bits filename)};
+
+ if (!defined($type) || !defined($size)) {
+ log_warn("'$fn': cannot check certificate, failed to get it's type or size!");
+ }
+
+ my $check = $certs_check->{$type};
+ if (!defined($check)) {
+ log_warn("'$fn': certificate's public key type '$type' unknown!");
+ next;
+ }
+
+ if ($size < $check->{minsize}) {
+ log_fail("'$fn', certificate's $check->{name} public key size is less than 2048 bit");
+ $certs_check_failed = 1;
+ } else {
+ log_pass("Certificate '$fn' passed Debian Busters (and newer) security level for TLS connections ($size >= 2048)");
+ }
+ }
+
+ check_backup_retention_settings();
+ check_cifs_credential_location();
+ check_custom_pool_roles();
+ check_lxcfs_fuse_version();
+ check_node_and_guest_configurations();
+ check_apt_repos();
+ check_nvidia_vgpu_service();
+ check_bootloader();
+ check_dkms_modules();
+}
+
+my sub colored_if {
+ my ($str, $color, $condition) = @_;
+ return "". ($condition ? colored($str, $color) : $str);
+}
+
+__PACKAGE__->register_method ({
+ name => 'checklist',
+ path => 'checklist',
+ method => 'GET',
+ description => 'Check (pre-/post-)upgrade conditions.',
+ parameters => {
+ additionalProperties => 0,
+ properties => {
+ full => {
+ description => 'perform additional, expensive checks.',
+ type => 'boolean',
+ optional => 1,
+ default => 0,
+ },
+ },
+ },
+ returns => { type => 'null' },
+ code => sub {
+ my ($param) = @_;
+
+ my $kernel_cli = PVE::Tools::file_get_contents('/proc/cmdline');
+ if ($kernel_cli =~ /systemd.unified_cgroup_hierarchy=0/){
+ $forced_legacy_cgroup = 1;
+ }
+
+ check_pve_packages();
+ check_cluster_corosync();
+ check_ceph();
+ check_storage_health();
+ check_misc();
+
+ if ($param->{full}) {
+ check_containers_cgroup_compat();
+ } else {
+ log_skip("NOTE: Expensive checks, like CT cgroupv2 compat, not performed without '--full' parameter");
+ }
+
+ print_header("SUMMARY");
+
+ my $total = 0;
+ $total += $_ for values %$counters;
+
+ print "TOTAL: $total\n";
+ print colored("PASSED: $counters->{pass}\n", 'green');
+ print "SKIPPED: $counters->{skip}\n";
+ print colored_if("WARNINGS: $counters->{warn}\n", 'yellow', $counters->{warn} > 0);
+ print colored_if("FAILURES: $counters->{fail}\n", 'bold red', $counters->{fail} > 0);
+
+ if ($counters->{warn} > 0 || $counters->{fail} > 0) {
+ my $color = $counters->{fail} > 0 ? 'bold red' : 'yellow';
+ print colored("\nATTENTION: Please check the output for detailed information!\n", $color);
+ print colored("Try to solve the problems one at a time and then run this checklist tool again.\n", $color) if $counters->{fail} > 0;
+ }
+
+ return undef;
+ }});
+
+our $cmddef = [ __PACKAGE__, 'checklist', [], {}];
+
+1;
diff --git a/bin/Makefile b/bin/Makefile
index 82d5c633..cfe81a22 100644
--- a/bin/Makefile
+++ b/bin/Makefile
@@ -13,7 +13,7 @@ CLITOOLS = \
pvenode \
pvesh \
pve7to8 \
-
+ pve8to9 \
SCRIPTS = \
$(SERVICES) \
@@ -73,6 +73,16 @@ pve7to8.1:
printf ".SH SYNOPSIS\npve7to8 [--full]\n" >> $@.tmp
mv $@.tmp $@
+
+pve8to9.1:
+ printf ".TH PVE8TO9 1\n.SH NAME\npve8to9 \- Proxmox VE upgrade checker script for 8.4+ to current 9.x\n" > $@.tmp
+ printf ".SH DESCRIPTION\nThis tool will help you to detect common pitfalls and misconfguration\
+ before, and during the upgrade of a Proxmox VE system\n" >> $@.tmp
+ printf "Any failure must be addressed before the upgrade, and any warning must be addressed, \
+ or at least carefully evaluated, if a false-positive is suspected\n" >> $@.tmp
+ printf ".SH SYNOPSIS\npve8to9 [--full]\n" >> $@.tmp
+ mv $@.tmp $@
+
pveversion.1.pod: pveversion
pveupgrade.1.pod: pveupgrade
pvereport.1.pod: pvereport
diff --git a/bin/pve8to9 b/bin/pve8to9
new file mode 100755
index 00000000..29f3c7ad
--- /dev/null
+++ b/bin/pve8to9
@@ -0,0 +1,8 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+use PVE::CLI::pve8to9;
+
+PVE::CLI::pve8to9->run_cli_handler();
--
2.39.5
More information about the pve-devel
mailing list