[pve-devel] [PATCH v2 pve-storage 1/2] add external snasphot support
Giotta Simon RUAGH
Simon.Giotta at ruag.ch
Thu Oct 24 09:59:13 CEST 2024
Hi Everyone
> I mean, if we don't allow .raw files to be snapshotted then this problem doesn't exist ;)
Quick comment from the bleacher; Adding a mechanism to shapshot raw disks might solve the TPM (tpmstate) snapshotting issue, as well as allowing containers to be snapshot.
For context:
When using a storage that does not natively support snapshotting (NFS on NetApp or similar enterprise storage, in particular), raw disks cannot be snapshot.
Since tpmstate disks can only be stored as raw (as I understand they are just a binary blob?), this makes it impossible to snapshot or (link-)clone any VMs that have a TPM. This especially is an issue for current Windows clients.
Same issue for LXC containers, as their storage format is raw only as well.
https://bugzilla.proxmox.com/show_bug.cgi?id=4693
Beste Grüsse
Simon Giotta
Systemadministrator
simon.giotta at ruag.ch
RUAG AG
Schaffhauserstrasse 580 | 8052 Zürich
-----Original Message-----
From: pve-devel <pve-devel-bounces at lists.proxmox.com> On Behalf Of Fabian Grünbichler
Sent: Donnerstag, 24. Oktober 2024 08:42
To: DERUMIER, Alexandre <alexandre.derumier at groupe-cyllene.com>; pve-devel at lists.proxmox.com
Subject: Re: [pve-devel] [PATCH v2 pve-storage 1/2] add external snasphot support
> DERUMIER, Alexandre <alexandre.derumier at groupe-cyllene.com> hat am 23.10.2024 14:59 CEST geschrieben:
>
>
> Hi Fabian,
>
> thanks for the review !
>
> >>-------- Message initial --------
> >>De: Fabian Grünbichler <f.gruenbichler at proxmox.com>
> >>À: Proxmox VE development discussion <pve-devel at lists.proxmox.com>
> >>Cc: Alexandre Derumier <alexandre.derumier at groupe-cyllene.com>
> >>Objet: Re: [pve-devel] [PATCH v2 pve-storage 1/2] add external
> >>snasphot support
> >>Date: 23/10/2024 12:12:46
> >>
> >>some high level comments:
> >>
> >>I am not sure how much we gain here with the raw support?
>
> They are really qcow2 overhead, mostly with big disk.
> as for good performance, the qcow2 l2-cache-size need to be keeped in
> memory (and it's 1MB by disk)
> https://events.static.linuxfound.org/sites/events/files/slides/kvm-for
> um-2017-slides.pdf
>
> Hopefully, they are improvments with the "new" sub-cluster feature
> https://people.igalia.com/berto/files/kvm-forum-2020-slides.pdf
> I'm already using it at snapshot create, but I think we should also
> use it for main qcow2 volume.
>
>
> But even with that, you can still have performance impact.
> So yes, I think they are really usecase for workload when you only
> need snapshot time to time (before an upgrade for example), but max
> performance with no snaphot exist.
my main point here is - all other storages treat snapshots as "cheap". if you combine raw+qcow2 snapshot overlays, suddenly performance will get worse if you keep a snapshot around for whatever reason..
> >> it's a bit confusing to have a volid ending with raw, with the
> >>current volume and all but the first snapshot actually being stored
> >>in qcow2 files, with the raw file being the "oldest" snapshot in the
> >>chain..
> if it's too confusing, we could use for example an .snap extension.
> (as we known that it's qcow2 behind)
I haven't thought yet about how to encode the snapshot name into the snapshot file name, but yeah, maybe something like that would be good. or maybe snap-VMID-disk-DISK.qcow2 ?
> if possible, I'd be much happier with the snapshot name in the
> snapshot file being a 1:1 match, see comments inline
>
> >>- makes it a lot easier to understand (admin wants to manually
> >>remove snapshot "foo", if "foo" was the last snapshot then right now
> >>the volume called "foo" is actually the current contents!)
>
> This part is really difficult, because you can't known in advance the
> name of the snapshot you'll take in the future. The only way could be
> to create a "current" volume , rename it when you took another
> snasphot (I'm not sure it's possible to do it live, and this could
> break link chain too)
>
> Also, I don't known how to manage the main volume, when you take the
> first snapshot ? we should rename it too.
I mean, if we don't allow .raw files to be snapshotted then this problem doesn't exist ;)
> so "vm-disk-100-disk-0.raw|qcow2" , become "vm-disk-100-disk-0-
> snap1.(raw|qcow2)" + new "vm-disk-100-disk-0-current.qcow2" ?
the volid changing on snapshot seems like it would require a lot of adaption.. OTOH, the volid containing a wrong format might also break things.
> I'll try to do test again to see what is possible.
>
>
>
>
> >>- means we don't have to do lookups via the full snapshot list all
> >>the time (e.g., if I want to do a full clone from a snapshot "foo",
> >>I can just pass the snap-foo volume to qemu-img)
>
> ok got it
>
>
>
> >>the naming scheme for snapshots needs to be adapted to not clash
> >>with regular volumes:
>
> >>$ pvesm alloc extsnap 131314 vm-131314-disk-foobar.qcow2 2G
> >>Formatting '/mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-
> >>foobar.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off
> >>preallocation=off compression_type=zlib size=2147483648
> >>lazy_refcounts=off refcount_bits=16 successfully created
> >>'extsnap:131314/vm-131314-disk-foobar.qcow2'
> >>$ qm rescan --vmid 131314
> >>rescan volumes...
> >>can't parse snapname from path at
> >>/usr/share/perl5/PVE/Storage/Plugin.pm line 1934.
>
> any preference for naming scheme ? for lvm external snap, I have used
> "vm-131314-disk-0-snap-<foobar>";
see above
> >>storage_migrate needs to handle external snapshots, or at least
> >>error out.
> it should already work. (I have tested move_disk, and live migration +
> storage migration). qemu_img_convert offline and qemu block job for
> live.
but don't all of those lose the snapshots? did you test it with snapshots and rollback afterwards?
> >>I haven't tested that part or linked clones or a lot of other
> >>advanced related actions at all ;)
>
> For linked clone, we can't have a base image with snapshots (other
> than _base_). so It'll be safe.
ack
> > Alexandre Derumier via pve-devel <pve-devel at lists.proxmox.com> hat
> > am
> > 30.09.2024 13:31 CEST geschrieben:
> > Signed-off-by: Alexandre Derumier <alexandre.derumier at groupe-
> > cyllene.com>
> > ---
> > src/PVE/Storage/DirPlugin.pm | 1 +
> > src/PVE/Storage/Plugin.pm | 225
> > +++++++++++++++++++++++++++++++--
> > --
> > 2 files changed, 201 insertions(+), 25 deletions(-)
> >
> > diff --git a/src/PVE/Storage/DirPlugin.pm
> > b/src/PVE/Storage/DirPlugin.pm index 2efa8d5..2bef673 100644
> > --- a/src/PVE/Storage/DirPlugin.pm
> > +++ b/src/PVE/Storage/DirPlugin.pm
> > @@ -80,6 +80,7 @@ sub options {
> > is_mountpoint => { optional => 1 },
> > bwlimit => { optional => 1 },
> > preallocation => { optional => 1 },
> > + snapext => { optional => 1 },
> > };
> > }
> >
> > diff --git a/src/PVE/Storage/Plugin.pm b/src/PVE/Storage/Plugin.pm
> > index 6444390..5e5197a 100644
> > --- a/src/PVE/Storage/Plugin.pm
> > +++ b/src/PVE/Storage/Plugin.pm
> > @@ -214,6 +214,11 @@ my $defaultData = {
> > maximum => 65535,
> > optional => 1,
> > },
> > + 'snapext' => {
> > + type => 'boolean',
> > + description => 'enable external snapshot.',
> > + optional => 1,
> > + },
> > },
> > };
> >
> > @@ -695,7 +700,7 @@ sub get_subdir {
> > }
> >
> > sub filesystem_path {
> > - my ($class, $scfg, $volname, $snapname) = @_;
> > + my ($class, $scfg, $volname, $snapname, $current_snap) = @_;
>
> see comment below
>
> >
> > my ($vtype, $name, $vmid, undef, undef, $isBase, $format) =
> > $class->parse_volname($volname);
> > @@ -703,7 +708,7 @@ sub filesystem_path {
> > # Note: qcow2/qed has internal snapshot, so path is always
> > # the same (with or without snapshot => same file).
> > die "can't snapshot this image format\n"
> > - if defined($snapname) && $format !~ m/^(qcow2|qed)$/;
> > + if defined($snapname) && !$scfg->{snapext} && $format !~
> > m/^(qcow2|qed)$/;
> >
> > my $dir = $class->get_subdir($scfg, $vtype);
> >
> > @@ -711,13 +716,22 @@ sub filesystem_path {
> >
> > my $path = "$dir/$name";
> >
> > + if($scfg->{snapext}) {
> > + my $snappath = get_snap_path($path, $snapname);
> > + if($snapname) {
> > + $path = $snappath;
> > + } elsif ($current_snap) {
> > + $path = $current_snap->{file}; }
> > + }
>
> see commente below
>
> > return wantarray ? ($path, $vmid, $vtype) : $path;
> > }
> >
> > sub path {
> > my ($class, $scfg, $volname, $storeid, $snapname) = @_;
> >
> > - return $class->filesystem_path($scfg, $volname, $snapname);
> > + my $current_snapshot = $class->get_current_snapshot($scfg,
> > $storeid, $volname);
>
> >>this is pretty expensive, and would only be needed if $snapname is
> >>not set..
>
> The main problem is when you start a vm on a specific snasphot, we
> don't send the $snapname param.
>
> One way could be that qemu-server check the current snapshot from
> config when doing specific action like start.
if we manage to find a way to make the volid always point at the top overlay, then that wouldn't be needed..
> > + return $class->filesystem_path($scfg, $volname, $snapname,
> > $current_snapshot);
>
> >>couldn't we avoid extending the signature of filesystem_path and
> >>just
> pass the name of the current snapshot as $snapname?
>
> I need to redo test, I don't remember why I have splitted them, but
> you are right, it should be cleaner.
>
> > }
> >
> > sub create_base {
> > @@ -1074,13 +1088,31 @@ sub volume_resize {
> > sub volume_snapshot {
> > my ($class, $scfg, $storeid, $volname, $snap) = @_;
> >
> > - die "can't snapshot this image format\n" if $volname !~
> > m/\.(qcow2|qed)$/;
> > + die "can't snapshot this image format\n" if $volname !~
> > m/\.(raw|qcow2|qed)$/;
> >
> > - my $path = $class->filesystem_path($scfg, $volname);
> > + die "external snapshot need to be enabled to snapshot .raw
> > volumes\n" if !$scfg->{snapext};
>
> >>this condition is definitely wrong - it means no more snapshotting
> >>unless external snapshot support is enabled..
>
> oops, sorry.
>
> >
> > - my $cmd = ['/usr/bin/qemu-img', 'snapshot','-c', $snap, $path];
> > + if($scfg->{snapext}) {
> >
> > - run_command($cmd);
> > + my $path = $class->path($scfg, $volname, $storeid);
> > +
> > + my $snappath = get_snap_path($path, $snap); my $format =
> > + ($class->parse_volname($volname))[6];
> > +
> > + my $cmd = ['/usr/bin/qemu-img', 'create', '-b', $path,
> > + '-F', $format, '-f', 'qcow2', $snappath];
>
> >>see comments on qemu-server, but.. wouldn't it be better if the file
> >>with $snap in its name would be the one storing that snapshot's data?
> >>i.e., rename the "current" volume to be called ...-$snap... , and
> >>then create a new "current" file without a suffix with the renamed
> >>volume as backing file?
>
> I'll try it !
>
> > +
> > + my $options = "extended_l2=on,";
> > + $options .= preallocation_cmd_option($scfg, 'qcow2'); push @$cmd,
> > + '-o', $options; run_command($cmd);
> > +
> > + } else {
> > +
> > + my $path = $class->filesystem_path($scfg, $volname); my $cmd =
> > +['/usr/bin/qemu-img', 'snapshot','-c', $snap, $path];
> > +run_command($cmd);
> > + }
> >
> > return undef;
> > }
> > @@ -1091,19 +1123,39 @@ sub volume_snapshot {
> > sub volume_rollback_is_possible {
> > my ($class, $scfg, $storeid, $volname, $snap, $blockers) = @_;
> >
> > + if ($scfg->{snapext}) {
> > + #technically, we could manage multibranch, we it need lot more
> > +work
> > for snapshot delete
>
> >>would multibranch be easier if there is a simple 1:1 correspondence
> >>between snapshots and their filenames?
> >>
> >>switching to a different part of the "hierarchy" is then just
> >>- delete current volume
> >>- create new current volume using rollback target as backing file
> the rollback/branch switch is not too difficult, maybe 1:1 naming
> could help.
>
> >>I guess deletion does become harder then, since it potentially
> >>requires multiple rebases..
>
> yes, The biggest difficulty is snapshot delete, as you need to create
> a block-stream job, mergin/writing to each branch child, and you need
> to do it atomically with a transaction with multiple jobs.
> So yes, it's possible, but I wanted to keep it easy for now.
sure, this restriction could be lifted in a follow-up!
> > + my $path = $class->filesystem_path($scfg, $volname); my $snappath
> > + = get_snap_path($path, $snap);
> > +
> > + my $snapshots = $class->volume_snapshot_info($scfg, $storeid,
> > $volname);
> > + my $currentpath = $snapshots->{current}->{file}; return 1 if !-e
> > + $snappath || $currentpath eq $snappath;
> > +
> > + die "can't rollback, '$snap' is not most recent snapshot on
> > '$volname'\n";
> > + }
> > +
> > return 1;
> > }
> >
> > sub volume_snapshot_rollback {
> > my ($class, $scfg, $storeid, $volname, $snap) = @_;
> >
> > - die "can't rollback snapshot this image format\n" if $volname
> > !~ m/\.(qcow2|qed)$/;
> > + die "can't rollback snapshot this image format\n" if $volname
> > +!~
> > m/\.(raw|qcow2|qed)$/;
> >
> > - my $path = $class->filesystem_path($scfg, $volname);
> > + die "external snapshot need to be enabled to rollback snapshot
> > .raw volumes\n" if $volname =~ m/\.(raw)$/ && !$scfg->{snapext};
> >
> > - my $cmd = ['/usr/bin/qemu-img', 'snapshot','-a', $snap, $path];
> > + my $path = $class->filesystem_path($scfg, $volname);
> >
> > - run_command($cmd);
> > + if ($scfg->{snapext}) {
> > + #simply delete the current snapshot and recreate it my $snappath
> > += get_snap_path($path, $snap); unlink($snappath);
> > +$class->volume_snapshot($scfg, $storeid, $volname, $snap);
>
> this *reads* so weird ;) it is right given the current semantics
> (current snapshot == live image, snapshot data actually stored in
> parent snapshot)
>
> > + } else {
> > + my $cmd = ['/usr/bin/qemu-img', 'snapshot','-a', $snap, $path];
> > +run_command($cmd);
> > + }
> >
> > return undef;
> > }
> > @@ -1111,17 +1163,50 @@ sub volume_snapshot_rollback {
> > sub volume_snapshot_delete {
> > my ($class, $scfg, $storeid, $volname, $snap, $running) = @_;
> >
> > - die "can't delete snapshot for this image format\n" if $volname
> > !~ m/\.(qcow2|qed)$/;
> > + die "can't delete snapshot for this image format\n" if $volname
> > !~ m/\.(raw|qcow2|qed)$/;
> > +
> > + die "external snapshot need to be enabled to delete snapshot of
> > .raw volumes\n" if !$scfg->{snapext};
> >
> > return 1 if $running;
> >
> > - my $path = $class->filesystem_path($scfg, $volname);
> > + my $cmd = "";
> > + if ($scfg->{snapext}) {
> > +
> > + my $snapshots = $class->volume_snapshot_info($scfg, $storeid,
> > $volname);
> > + my $snappath = $snapshots->{$snap}->{file}; return if !-e
> > + $snappath; #already deleted ?
> > +
> > + my $parentsnap = $snapshots->{$snap}->{parent}; my $childsnap =
> > +$snapshots->{$snap}->{child};
> > + die "error: can't find a parent for this snapshot" if
> > !$parentsnap;
> >
> > - $class->deactivate_volume($storeid, $scfg, $volname, $snap,
> > {});
> > + my $parentpath = $snapshots->{$parentsnap}->{file};
> > + my $parentformat = $snapshots->{$parentsnap}->{'format'} if
> > $parentsnap;
> > + my $childpath = $snapshots->{$childsnap}->{file} if $childsnap; my
> > + $childformat = $snapshots->{$childsnap}->{'format'} if
> > $childsnap;
> >
> > - my $cmd = ['/usr/bin/qemu-img', 'snapshot','-d', $snap, $path];
> > + print "merge snapshot $snap to $parentsnap\n"; $cmd =
> > + ['/usr/bin/qemu-img', 'commit', $snappath]; run_command($cmd);
> > +
> > + #if we delete an intermediate snapshot, we need to link upper
> > snapshot to base snapshot
> > + if($childpath && -e $childpath) {
> > + die "missing parentsnap snapshot to rebase child $childpath\n"
> > if !$parentpath;
> > + print "link $childsnap to $parentsnap\n";
> > + $cmd = ['/usr/bin/qemu-img', 'rebase', '-u', '-b',
> > + $parentpath,
> > '-F', $parentformat, '-f', $childformat, $childpath];
> > + run_command($cmd);
> > + }
>
> >>wouldn't a regular safe rebase work just as well, instead of commit
> >>+ unsafe rebase? if there is no parent, passing in "" as "new"
> >>backing file should work..
>
> I'll test it, but I'm pretty sure this is the correct way.
>
> > +
> > + #delete the snapshot
> > + unlink($snappath);
> > + } else {
> > + my $path = $class->filesystem_path($scfg, $volname);
> >
> > - run_command($cmd);
> > + $class->deactivate_volume($storeid, $scfg, $volname, $snap, {});
> > +
> > + $cmd = ['/usr/bin/qemu-img', 'snapshot','-d', $snap, $path];
> > +run_command($cmd);
> > + }
> >
> > return undef;
> > }
> > @@ -1140,10 +1225,6 @@ sub volume_has_feature {
> > my ($class, $scfg, $feature, $storeid, $volname, $snapname,
> > $running, $opts) = @_;
> >
> > my $features = {
> > - snapshot => {
> > - current => { qcow2 => 1 },
> > - snap => { qcow2 => 1 },
> > - },
> > clone => {
> > base => { qcow2 => 1, raw => 1, vmdk => 1 },
> > },
> > @@ -1159,11 +1240,23 @@ sub volume_has_feature {
> > base => { qcow2 => 1, raw => 1, vmdk => 1 },
> > current => { qcow2 => 1, raw => 1, vmdk => 1 },
> > },
> > - rename => {
> > - current => {qcow2 => 1, raw => 1, vmdk => 1},
> > - },
> > + 'rename' => {
> > + current => { qcow2 => 1, raw => 1, vmdk => 1}, }
> > };
> >
> > + if ($scfg->{snapext}) {
> > + $features->{snapshot} = {
> > + current => { raw => 1, qcow2 => 1 },
> > + snap => { raw => 1, qcow2 => 1 },
> > + }
> > + } else {
> > + $features->{snapshot} = {
> > + current => { qcow2 => 1 },
> > + snap => { qcow2 => 1 },
> > + };
> > + }
> > +
>
> >>this could just leave $features as it is, and add the "raw" bits:
> >>
> >>if ($scfg->{snapext}) {
> >> $features->{snapshot}->{current}->{raw} = 1;
> >> $features->{snapshot}->{snap}->{raw} = 1;
> >>}
>
> ok !
> > if ($feature eq 'clone') {
> > if (
> > defined($opts->{valid_target_formats})
> > @@ -1222,7 +1315,9 @@ sub list_images {
> > }
> >
> > if ($vollist) {
> > - my $found = grep { $_ eq $volid } @$vollist;
> > + my $search_volid = $volid;
> > + $search_volid =~ s/-snap-.*\./\./;
> > + my $found = grep { $_ eq $search_volid } @$vollist;
> > next if !$found;
> > }
> >
> > @@ -1380,7 +1475,53 @@ sub status {
> > sub volume_snapshot_info {
> > my ($class, $scfg, $storeid, $volname) = @_;
> >
> > - die "volume_snapshot_info is not implemented for $class";
> > + die "volume_snapshot_info is not implemented for $class" if
> > !$scfg->{snapext};
> > +
> > + my $path = $class->filesystem_path($scfg, $volname);
> > +
> > + my ($vtype, $name, $vmid, $basename, $basevmid, $isBase,
> > $format) = $class->parse_volname($volname);
> > +
> > + my $basevolname = $volname;
> > + $basevolname =~ s/\.(raw|qcow2)$//;
> > +
> > + my $snapshots = $class->list_images($storeid, $scfg, $vmid);
> > + my $info = {};
> > + for my $snap (@$snapshots) {
> > +
> > + my $volid = $snap->{volid};
> > + next if ($volid !~ m/$basevolname/);
>
> >>this regex is broken w.r.t. partial matching!
> >>
> >>e.g., if a VM has both a disk -1.qcow2 and -11.qcow2 and I attempt to
> >>snapshot it using external snapshots:
> ok !
>
>
> snapshotting 'drive-scsi0' (extsnap:131314/vm-131314-disk-0.raw)
> Formatting '/mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-0-snap-
> test2.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=on
> preallocation=off compression_type=zlib size=200704
> backing_file=/mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-0-snap-
> test.qcow2 backing_fmt=raw lazy_refcounts=off refcount_bits=16
> snapshotting 'drive-scsi1' (extsnap:131314/vm-131314-disk-1.qcow2)
> Formatting '/mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-11-snap-
> test2.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=on
> preallocation=off compression_type=zlib size=2147483648
> backing_file=/mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-
> 11.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
> snapshotting 'drive-scsi2' (extsnap:131314/vm-131314-disk-11.qcow2)
> qemu-img: /mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-11-snap-
> test2.qcow2: Error: Trying to create an image with the same filename as
> the backing file
> snapshot create failed: starting cleanup
> merge snapshot test2 to test
> Image committed.
> merge snapshot test2 to base
> Image committed.
> TASK ERROR: command '/usr/bin/qemu-img create -b
> /mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-11-snap-test2.qcow2
> -F qcow2 -f qcow2 /mnt/pve/ext4/extsnap/images/131314/vm-131314-disk-
> 11-snap-test2.qcow2 -o 'extended_l2=on,preallocation=off'' failed: exit
> code 1
>
> > +
> > + my (undef, $snapvolname) = parse_volume_id($volid);
> > + my $snapname = get_snapname_from_path($volid);
> > + my $snapfile = $class->filesystem_path($scfg, $snapvolname,
> > $snapname);
> > + $snapname = 'base' if !$snapname;
> > +
> > + my $format = $snap->{'format'};
> > + my $parentfile = $snap->{parent};
> > + my $parentname = get_snapname_from_path($parentfile) if
> > $parentfile;
> > + $parentname = 'base' if !$parentname && $parentfile;
> > +
> > + $info->{$snapname}->{file} = $snapfile;
> > + $info->{$snapname}->{volid} = $volid;
> > + $info->{$snapname}->{'format'} = $format;
> > + $info->{$snapname}->{parent} = $parentname if $parentname;
> > + $info->{$parentname}->{child} = $snapname if $parentname;
> > + }
> > +
> > + my $current = undef;
> > + for my $id (keys %$info) {
> > + my $snap = $info->{$id};
> > + die "error: snap $id: you can't have multiple current snapshot:
> > current:$current\n" if !$snap->{child} && $current;
> > + $current = $id if !$snap->{child};
> > + }
> > +
> > + if ($current) {
> > + $info->{current}->{file} = $info->{$current}->{file};
> > + $info->{current}->{'format'} = $info->{$current}->{'format'};
> > + $info->{current}->{parent} = $info->{$current}->{parent};
> > + }
> > +
> > + return $info;
> > }
> >
> > sub activate_storage {
> > @@ -1764,4 +1905,38 @@ sub config_aware_base_mkdir {
> > }
> > }
> >
> > +sub get_snap_path {
> > + my ($path, $snap) = @_;
> > +
> > + my $basepath = "";
> > + my $baseformat = "";
> > + if ($path =~ m/^((.*)(vm-(\d+)-disk-(\d+)))(-snap-
> > (.*))?\.(raw|qcow2)/) {
>
> >>this regex is wrong - volumes can have arbitrary names after the -
> >>disk- part..
>
> ah sorry. do you have some example where it's used ? (maybe for efi or
> other specific disk ?)
no, any vdisk can have (almost) anything after the -disk- part. you can allocate such volumes using `pvesm alloc` or the API (we just are not very good at keeping those custom suffixes when moving/migrating/.. ;))
> > + $basepath = $1;
> > + $baseformat = $8;
> > + }
> > + my $format = $snap ? 'qcow2' : $baseformat;
> > + my $snappath = $snap ? $basepath."-snap-$snap.$format" : undef;
> > +
> > + return $snappath;
> > +}
> > +
> > +sub get_snapname_from_path {
> > + my ($path) = @_;
> > +
> > + if ($path =~ m/^((.*)(vm-(\d+)-disk-(\d+)))(-snap-
> > (.*))?\.(raw|qcow2)/) {
>
> >>here as well.. and this whole helper is just used twice in
> >>volume_snapshot_info, maybe it could be inlined or made private
> ok !
>
>
> > + my $snapname = $7;
> > + return $snapname;
> > + }
> > + die "can't parse snapname from path";
> > +}
> > +
> > +sub get_current_snapshot {
> > + my ($class, $scfg, $storeid, $volname) = @_;
> > + #IMPROVE ME: faster way to find current snapshot? (search the
> > most recent created snapshot file ? need to works with lvm volume
> > too)
> > +
> > + return if !$scfg->{snapext};
> > + my $snapshots = $class->volume_snapshot_info($scfg, $storeid,
> > $volname);
> > + return $snapshots->{current};
> > +}
> > +
> > 1;
> > --
> > 2.39.2
_______________________________________________
pve-devel mailing list
pve-devel at lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
More information about the pve-devel
mailing list