[pve-devel] [RFC qemu-server v2 21/25] backup: implement restore for external providers
Fiona Ebner
f.ebner at proxmox.com
Tue Aug 13 15:28:25 CEST 2024
First, the provider is asked about what restore mechanism to use.
Currently, only 'qemu-img' is possible. Then the configuration files
are restored, the provider gives information about volumes contained
in the backup and finally the volumes are restored via
'qemu-img convert'.
The code for the restore_external_archive() function was copied and
adapted from the restore_proxmox_backup_archive() function. Together
with restore_vma_archive() it seems sensible to extract the common
parts and use a dedicated module for restore code.
The parse_restore_archive() helper was renamed, because it's not just
parsing.
Signed-off-by: Fiona Ebner <f.ebner at proxmox.com>
---
Changes in v2:
* Adapt to API changes.
PVE/API2/Qemu.pm | 29 +++++++++-
PVE/QemuServer.pm | 139 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 165 insertions(+), 3 deletions(-)
diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 212cfc1b..8917905e 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -845,7 +845,7 @@ __PACKAGE__->register_method({
return $res;
}});
-my $parse_restore_archive = sub {
+my $classify_restore_archive = sub {
my ($storecfg, $archive) = @_;
my ($archive_storeid, $archive_volname) = PVE::Storage::parse_volume_id($archive, 1);
@@ -859,6 +859,21 @@ my $parse_restore_archive = sub {
$res->{type} = 'pbs';
return $res;
}
+ my $log_function = sub {
+ my ($log_level, $message) = @_;
+ my $prefix = $log_level eq 'err' ? 'ERROR' : uc($log_level);
+ print "$prefix: $message\n";
+ };
+ my $backup_provider = PVE::Storage::new_backup_provider(
+ $storecfg,
+ $archive_storeid,
+ $log_function,
+ );
+ if ($backup_provider) {
+ $res->{type} = 'external';
+ $res->{'backup-provider'} = $backup_provider;
+ return $res;
+ }
}
my $path = PVE::Storage::abs_filesystem_path($storecfg, $archive);
$res->{type} = 'file';
@@ -1011,7 +1026,7 @@ __PACKAGE__->register_method({
'backup',
);
- $archive = $parse_restore_archive->($storecfg, $archive);
+ $archive = $classify_restore_archive->($storecfg, $archive);
}
}
@@ -1069,7 +1084,15 @@ __PACKAGE__->register_method({
PVE::QemuServer::check_restore_permissions($rpcenv, $authuser, $merged);
}
}
- if ($archive->{type} eq 'file' || $archive->{type} eq 'pipe') {
+ if (my $backup_provider = $archive->{'backup-provider'}) {
+ PVE::QemuServer::restore_external_archive(
+ $backup_provider,
+ $archive->{volid},
+ $vmid,
+ $authuser,
+ $restore_options,
+ );
+ } elsif ($archive->{type} eq 'file' || $archive->{type} eq 'pipe') {
die "live-restore is only compatible with backup images from a Proxmox Backup Server\n"
if $live_restore;
PVE::QemuServer::restore_file_archive($archive->{path} // '-', $vmid, $authuser, $restore_options);
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 37f56f69..6cd21b7d 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -7245,6 +7245,145 @@ sub restore_proxmox_backup_archive {
}
}
+sub restore_external_archive {
+ my ($backup_provider, $archive, $vmid, $user, $options) = @_;
+
+ die "live restore from backup provider is not implemented\n" if $options->{live};
+
+ my $storecfg = PVE::Storage::config();
+
+ my ($storeid, $volname) = PVE::Storage::parse_volume_id($archive);
+ my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
+
+ my $tmpdir = "/var/tmp/vzdumptmp$$";
+ rmtree $tmpdir;
+ mkpath $tmpdir;
+
+ my $conffile = PVE::QemuConfig->config_file($vmid);
+ # disable interrupts (always do cleanups)
+ local $SIG{INT} =
+ local $SIG{TERM} =
+ local $SIG{QUIT} =
+ local $SIG{HUP} = sub { print STDERR "got interrupt - ignored\n"; };
+
+ # Note: $oldconf is undef if VM does not exists
+ my $cfs_path = PVE::QemuConfig->cfs_config_path($vmid);
+ my $oldconf = PVE::Cluster::cfs_read_file($cfs_path);
+ my $new_conf_raw = '';
+
+ my $rpcenv = PVE::RPCEnvironment::get();
+ my $devinfo = {}; # info about drives included in backup
+ my $virtdev_hash = {}; # info about allocated drives
+
+ eval {
+ # enable interrupts
+ local $SIG{INT} =
+ local $SIG{TERM} =
+ local $SIG{QUIT} =
+ local $SIG{HUP} =
+ local $SIG{PIPE} = sub { die "interrupted by signal\n"; };
+
+ my $cfgfn = "$tmpdir/qemu-server.conf";
+ my $firewall_config_fn = "$tmpdir/fw.conf";
+
+ my $cmd = "restore";
+
+ my ($mechanism, $vmtype) =
+ $backup_provider->restore_get_mechanism($volname, $storeid);
+ die "mechanism '$mechanism' requested by backup provider is not supported for VMs\n"
+ if $mechanism ne 'qemu-img';
+ die "cannot restore non-VM guest of type '$vmtype'\n" if $vmtype ne 'qemu';
+
+ $devinfo = $backup_provider->restore_vm_init($volname, $storeid);
+
+ my $data = $backup_provider->restore_get_guest_config($volname, $storeid)
+ or die "backup provider failed to extract guest configuration\n";
+ PVE::Tools::file_set_contents($cfgfn, $data);
+
+ if ($data = $backup_provider->restore_get_firewall_config($volname, $storeid)) {
+ PVE::Tools::file_set_contents($firewall_config_fn, $data);
+ my $pve_firewall_dir = '/etc/pve/firewall';
+ mkdir $pve_firewall_dir; # make sure the dir exists
+ PVE::Tools::file_copy($firewall_config_fn, "${pve_firewall_dir}/$vmid.fw");
+ }
+
+ my $fh = IO::File->new($cfgfn, "r") or die "unable to read qemu-server.conf - $!\n";
+
+ $virtdev_hash = $parse_backup_hints->($rpcenv, $user, $storecfg, $fh, $devinfo, $options);
+
+ # create empty/temp config
+ PVE::Tools::file_set_contents($conffile, "memory: 128\nlock: create");
+
+ $restore_cleanup_oldconf->($storecfg, $vmid, $oldconf, $virtdev_hash) if $oldconf;
+
+ # allocate volumes
+ my $map = $restore_allocate_devices->($storecfg, $virtdev_hash, $vmid);
+
+ for my $virtdev (sort keys $virtdev_hash->%*) {
+ my $d = $virtdev_hash->{$virtdev};
+ next if $d->{is_cloudinit}; # no need to restore cloudinit
+
+ my $info =
+ $backup_provider->restore_vm_volume_init($volname, $storeid, $d->{devname}, {});
+ my $source_path = $info->{'qemu-img-path'}
+ or die "did not get source image path from backup provider\n";
+ eval {
+ qemu_img_convert(
+ $source_path, $d->{volid}, $d->{size}, undef, 0, $options->{bwlimit});
+ };
+ my $err = $@;
+ eval {
+ $backup_provider->restore_vm_volume_cleanup($volname, $storeid, $d->{devname}, {});
+ };
+ if (my $cleanup_err = $@) {
+ die $cleanup_err if !$err;
+ warn $cleanup_err;
+ }
+ die $err if $err
+ }
+
+ $fh->seek(0, 0) || die "seek failed - $!\n";
+
+ my $cookie = { netcount => 0 };
+ while (defined(my $line = <$fh>)) {
+ $new_conf_raw .= restore_update_config_line(
+ $cookie,
+ $map,
+ $line,
+ $options->{unique},
+ );
+ }
+
+ $fh->close();
+ };
+ my $err = $@;
+
+ eval { $backup_provider->restore_vm_cleanup($volname, $storeid); };
+ warn "backup provider cleanup after restore failed - $@" if $@;
+
+ if ($err) {
+ $restore_deactivate_volumes->($storecfg, $virtdev_hash);
+ }
+
+ rmtree $tmpdir;
+
+ if ($err) {
+ $restore_destroy_volumes->($storecfg, $virtdev_hash);
+ die $err;
+ }
+
+ my $new_conf = restore_merge_config($conffile, $new_conf_raw, $options->{override_conf});
+ check_restore_permissions($rpcenv, $user, $new_conf);
+ PVE::QemuConfig->write_config($vmid, $new_conf);
+
+ eval { rescan($vmid, 1); };
+ warn $@ if $@;
+
+ PVE::AccessControl::add_vm_to_pool($vmid, $options->{pool}) if $options->{pool};
+
+ return;
+}
+
sub pbs_live_restore {
my ($vmid, $conf, $storecfg, $restored_disks, $opts) = @_;
--
2.39.2
More information about the pve-devel
mailing list