[pve-devel] [PATCH v4 pve-network 08/33] sdn: dhcp: add dnsmasq plugin
Stefan Hanreich
s.hanreich at proxmox.com
Fri Nov 17 12:39:46 CET 2023
The plugin creates a dnsmasq@<zone> service that spawns a dnsmasq
instance that handles dhcp for that zone.
The configuration files for a dnsmasq instance lie within
/etc/dnsmasq.d/<zone>
The plugin generates the following configuration files:
* 00-default.conf
Contains the default global configuration for dnsmasq. Disables DNS,
enables some specific options for Windows, does some
security-related configuration and makes dnsmasq bind only to the
interfaces it is responsible for
* 10-<subnet>.conf
Contains the default settings for a subnet. Sets dhcp options for
DNS and gateway.
* 10-<subnet>.ranges.conf
Contains the configuration of DHCP ranges for a subnet.
* ethers
Contains the MAC address to IP mappings for a zone.
Every subnet gets assigned a tag in the dnsmasq configuration that is
equal to the subnet_id. This can be used to override / set additional
configuration options on a per-subnet basis.
Additionally it creates the file /etc/default/dnsmasq.<zone> that
provides default options for the dnsmasq service.
Leases are stored in /var/lib/misc/dnsmasq.<zone>.
Co-Authored-By: Alexandre Derumier <aderumier at odiso.com>
Signed-off-by: Stefan Hanreich <s.hanreich at proxmox.com>
---
debian/control | 1 +
src/PVE/Network/SDN/Dhcp/Dnsmasq.pm | 198 ++++++++++++++++++++++++++++
2 files changed, 199 insertions(+)
create mode 100644 src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
diff --git a/debian/control b/debian/control
index 8b720c3..4424096 100644
--- a/debian/control
+++ b/debian/control
@@ -24,6 +24,7 @@ Depends: libpve-common-perl (>= 5.0-45),
${misc:Depends},
${perl:Depends},
Recommends: frr-pythontools (>= 8.5.1~), ifupdown2
+Suggests: dnsmasq
Description: Proxmox VE's SDN (Software Defined Network) stack
This package contains the Software Defined Network (tech preview) for
Proxmox VE.
diff --git a/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm b/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
new file mode 100644
index 0000000..21a6ddd
--- /dev/null
+++ b/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
@@ -0,0 +1,198 @@
+package PVE::Network::SDN::Dhcp::Dnsmasq;
+
+use strict;
+use warnings;
+
+use base qw(PVE::Network::SDN::Dhcp::Plugin);
+
+use Net::IP qw(:PROC);
+use PVE::Tools qw(file_set_contents run_command lock_file);
+
+use File::Copy;
+
+my $DNSMASQ_CONFIG_ROOT = '/etc/dnsmasq.d';
+my $DNSMASQ_DEFAULT_ROOT = '/etc/default';
+my $DNSMASQ_LEASE_ROOT = '/var/lib/misc';
+
+sub type {
+ return 'dnsmasq';
+}
+
+sub del_ip_mapping {
+ my ($class, $dhcpid, $mac) = @_;
+
+ my $ethers_file = "$DNSMASQ_CONFIG_ROOT/$dhcpid/ethers";
+ my $ethers_tmp_file = "$ethers_file.tmp";
+
+ my $removeFn = sub {
+ open(my $in, '<', $ethers_file) or die "Could not open file '$ethers_file' $!\n";
+ open(my $out, '>', $ethers_tmp_file) or die "Could not open file '$ethers_tmp_file' $!\n";
+
+ while (my $line = <$in>) {
+ next if $line =~ m/^$mac/;
+ print $out $line;
+ }
+
+ close $in;
+ close $out;
+
+ move $ethers_tmp_file, $ethers_file;
+
+ chmod 0644, $ethers_file;
+ };
+
+ PVE::Tools::lock_file($ethers_file, 10, $removeFn);
+
+ if ($@) {
+ warn "Unable to remove $mac from the dnsmasq configuration: $@\n";
+ return;
+ }
+
+ my $service_name = "dnsmasq\@$dhcpid";
+ PVE::Tools::run_command(['systemctl', 'reload', $service_name]);
+}
+
+sub add_ip_mapping {
+ my ($class, $dhcpid, $mac, $ip) = @_;
+
+ my $ethers_file = "$DNSMASQ_CONFIG_ROOT/$dhcpid/ethers";
+ my $ethers_tmp_file = "$ethers_file.tmp";
+
+ my $appendFn = sub {
+ open(my $in, '<', $ethers_file) or die "Could not open file '$ethers_file' $!\n";
+ open(my $out, '>', $ethers_tmp_file) or die "Could not open file '$ethers_tmp_file' $!\n";
+
+ while (my $line = <$in>) {
+ next if $line =~ m/^$mac/;
+ print $out $line;
+ }
+
+ print $out "$mac,$ip\n";
+ close $in;
+ close $out;
+ move $ethers_tmp_file, $ethers_file;
+ chmod 0644, $ethers_file;
+ };
+
+ PVE::Tools::lock_file($ethers_file, 10, $appendFn);
+
+ if ($@) {
+ warn "Unable to add $mac/$ip to the dnsmasq configuration: $@\n";
+ return;
+ }
+
+ my $service_name = "dnsmasq\@$dhcpid";
+ PVE::Tools::run_command(['systemctl', 'reload', $service_name]);
+}
+
+sub configure_subnet {
+ my ($class, $dhcpid, $subnet_config) = @_;
+
+ die "No gateway defined for subnet $subnet_config->{id}"
+ if !$subnet_config->{gateway};
+
+ my $tag = $subnet_config->{id};
+
+ my @dnsmasq_config = (
+ "listen-address=$subnet_config->{gateway}",
+ );
+
+ my $option_string;
+ if (ip_is_ipv6($subnet_config->{network})) {
+ $option_string = 'option6';
+ push @dnsmasq_config, "enable-ra";
+ } else {
+ $option_string = 'option';
+ push @dnsmasq_config, "dhcp-option=tag:$tag,$option_string:router,$subnet_config->{gateway}";
+ }
+
+ push @dnsmasq_config, "dhcp-option=tag:$tag,$option_string:dns-server,$subnet_config->{'dhcp-dns-server'}"
+ if $subnet_config->{'dhcp-dns-server'};
+
+ PVE::Tools::file_set_contents(
+ "$DNSMASQ_CONFIG_ROOT/$dhcpid/10-$subnet_config->{id}.conf",
+ join("\n", @dnsmasq_config) . "\n"
+ );
+}
+
+sub configure_range {
+ my ($class, $dhcpid, $subnet_config, $range_config) = @_;
+
+ my $range_file = "$DNSMASQ_CONFIG_ROOT/$dhcpid/10-$subnet_config->{id}.ranges.conf",
+ my $tag = $subnet_config->{id};
+
+ open(my $fh, '>>', $range_file) or die "Could not open file '$range_file' $!\n";
+ print $fh "dhcp-range=set:$tag,$range_config->{'start-address'},$range_config->{'end-address'}\n";
+ close $fh;
+}
+
+sub before_configure {
+ my ($class, $dhcpid) = @_;
+
+ my $config_directory = "$DNSMASQ_CONFIG_ROOT/$dhcpid";
+
+ mkdir($config_directory, 755) if !-d $config_directory;
+
+ my $default_config = <<CFG;
+CONFIG_DIR='$config_directory,\*.conf'
+DNSMASQ_OPTS="--conf-file=/dev/null"
+CFG
+
+ PVE::Tools::file_set_contents(
+ "$DNSMASQ_DEFAULT_ROOT/dnsmasq.$dhcpid",
+ $default_config
+ );
+
+ my $default_dnsmasq_config = <<CFG;
+except-interface=lo
+bind-dynamic
+no-resolv
+no-hosts
+dhcp-leasefile=$DNSMASQ_LEASE_ROOT/dnsmasq.$dhcpid.leases
+dhcp-hostsfile=$config_directory/ethers
+dhcp-ignore=tag:!known
+
+# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
+dhcp-option=252,"\\n"
+
+# Send microsoft-specific option to tell windows to release the DHCP lease
+# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
+# value as a four-byte integer - that's what microsoft wants.
+dhcp-option=vendor:MSFT,2,1i
+
+# If a DHCP client claims that its name is "wpad", ignore that.
+# This fixes a security hole. see CERT Vulnerability VU#598349
+dhcp-name-match=set:wpad-ignore,wpad
+dhcp-ignore-names=tag:wpad-ignore
+CFG
+
+ PVE::Tools::file_set_contents(
+ "$config_directory/00-default.conf",
+ $default_dnsmasq_config
+ );
+
+ unlink glob "$config_directory/10-*.conf";
+}
+
+sub after_configure {
+ my ($class, $dhcpid) = @_;
+
+ my $service_name = "dnsmasq\@$dhcpid";
+
+ PVE::Tools::run_command(['systemctl', 'enable', $service_name]);
+ PVE::Tools::run_command(['systemctl', 'restart', $service_name]);
+}
+
+sub before_regenerate {
+ my ($class) = @_;
+
+ PVE::Tools::run_command(['systemctl', 'stop', "dnsmasq@*"]);
+ PVE::Tools::run_command(['systemctl', 'disable', 'dnsmasq@']);
+}
+
+sub after_regenerate {
+ my ($class) = @_;
+ # noop
+}
+
+1;
--
2.39.2
More information about the pve-devel
mailing list