[pve-devel] [PATCH guest-common v4 1/1] add PCI/USB Resource configs
Dominik Csapak
d.csapak at proxmox.com
Thu May 25 12:17:45 CEST 2023
adds a config file for each type of resource (usb/pci) by using a 'map'
array propertystring for each node mapping
in each mapping we save the path(s) and some other information to detect
hardware changes (if possible) like the vendor/device id
both configs have custom header parser/formatter to omit the type (since
we only want one type per config here)
also each config has some helpers like find_on_current_node
the resulting config (e.g. for pci) would look like this:
---
some-pci-device
description some device
map node=node1,path=0000:00:01.0,id=1234:1234,iommugroup=4
map node=node2,path=0000:01:01.0,id=1234:1234,iommugroup=5
map node=node3,path=0000:02:01.0,id=1234:1234,iommugroup=6
---
some special notes:
* mdev is a per config entry, since it does not make sense to mix mdev
and non-mdev devices
* there can be multiple pci paths given per node mapping, this is
intended to have a different semantic than in the qemu config, namely
it will select the first available instead of passing all through as a
multifunction device
Signed-off-by: Dominik Csapak <d.csapak at proxmox.com>
---
src/Makefile | 3 +
src/PVE/Resource/PCI.pm | 226 ++++++++++++++++++++++++++++++++++++++++
src/PVE/Resource/USB.pm | 183 ++++++++++++++++++++++++++++++++
3 files changed, 412 insertions(+)
create mode 100644 src/PVE/Resource/PCI.pm
create mode 100644 src/PVE/Resource/USB.pm
diff --git a/src/Makefile b/src/Makefile
index 57a360b..d92b441 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -14,6 +14,9 @@ install: PVE
install -m 0644 PVE/Replication.pm ${PERL5DIR}/PVE/
install -m 0644 PVE/StorageTunnel.pm ${PERL5DIR}/PVE/
install -m 0644 PVE/Tunnel.pm ${PERL5DIR}/PVE/
+ install -d ${PERL5DIR}/PVE/Resource
+ install -m 0644 PVE/Resource/PCI.pm ${PERL5DIR}/PVE/Resource/
+ install -m 0644 PVE/Resource/USB.pm ${PERL5DIR}/PVE/Resource/
install -d ${PERL5DIR}/PVE/VZDump
install -m 0644 PVE/VZDump/Plugin.pm ${PERL5DIR}/PVE/VZDump/
install -m 0644 PVE/VZDump/Common.pm ${PERL5DIR}/PVE/VZDump/
diff --git a/src/PVE/Resource/PCI.pm b/src/PVE/Resource/PCI.pm
new file mode 100644
index 0000000..d4d9c44
--- /dev/null
+++ b/src/PVE/Resource/PCI.pm
@@ -0,0 +1,226 @@
+package PVE::Resource::PCI;
+
+use strict;
+use warnings;
+
+use PVE::Cluster qw(cfs_register_file cfs_read_file cfs_lock_file cfs_write_file);
+use PVE::INotify;
+use PVE::JSONSchema qw(get_standard_option parse_property_string);
+use PVE::SectionConfig;
+use PVE::SysFSTools;
+
+use base qw(PVE::SectionConfig);
+
+my $FILENAME = 'resource/pci.cfg';
+
+cfs_register_file($FILENAME,
+ sub { __PACKAGE__->parse_config(@_); },
+ sub { __PACKAGE__->write_config(@_); });
+
+
+# so we don't have to repeat the type every time
+sub parse_section_header {
+ my ($class, $line) = @_;
+
+ if ($line =~ m/^(\S+)\s*$/) {
+ my $id = $1;
+ my $errmsg = undef; # set if you want to skip whole section
+ eval { PVE::JSONSchema::pve_verify_configid($id) };
+ $errmsg = $@ if $@;
+ my $config = {}; # to return additional attributes
+ return ('pci', $id, $errmsg, $config);
+ }
+ return undef;
+}
+
+sub format_section_header {
+ my ($class, $type, $sectionId, $scfg, $done_hash) = @_;
+
+ return "$sectionId\n";
+}
+
+sub type {
+ return 'pci';
+}
+
+my $PCI_RE = "[a-f0-9]{4,}:[a-f0-9]{2}:[a-f0-9]{2}(?:\.[a-f0-9])?";
+
+my $map_fmt = {
+ node => get_standard_option('pve-node'),
+ id =>{
+ description => "The vendor and device ID that is expected. Used for".
+ " detecting hardware changes",
+ type => 'string',
+ pattern => qr/^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{4}$/,
+ },
+ 'subsystem-id' => {
+ description => "The subsystem vendor and device ID that is expected. Used".
+ " for detecting hardware changes.",
+ type => 'string',
+ pattern => qr/^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{4}$/,
+ optional => 1,
+ },
+ path => {
+ description => "The path to the device. If the function is omitted, the whole device is"
+ ." mapped. In that case use the attributes of the first device. You can give"
+ ." multiple paths as a semicolon seperated list, the first available will then"
+ ." be chosen on guest start.",
+ type => 'string',
+ pattern => "(?:${PCI_RE};)*${PCI_RE}",
+ },
+ iommugroup => {
+ type => 'integer',
+ description => "The IOMMU group in which the device is to be expected in.".
+ "Used for detecting hardware changes.",
+ optional => 1,
+ },
+ description => {
+ description => "Description of the node specific device.",
+ type => 'string',
+ optional => 1,
+ maxLength => 4096,
+ },
+};
+
+my $defaultData = {
+ propertyList => {
+ id => {
+ type => 'string',
+ description => "The ID of the logical PCI resource.",
+ format => 'pve-configid',
+ },
+ description => {
+ description => "Description of the logical PCI device.",
+ type => 'string',
+ optional => 1,
+ maxLength => 4096,
+ },
+ mdev => {
+ type => 'boolean',
+ optional => 1,
+ },
+ map => {
+ type => 'array',
+ description => 'A list of maps for the cluster nodes.',
+ optional => 1,
+ items => {
+ type => 'string',
+ format => $map_fmt,
+ },
+ },
+ },
+};
+
+sub private {
+ return $defaultData;
+}
+
+sub options {
+ return {
+ description => { optional => 1 },
+ mdev => { optional => 1 },
+ map => {},
+ };
+}
+
+# checks if the given config is valid for the current node
+sub assert_valid {
+ my ($name, $cfg) = @_;
+
+ my @paths = split(';', $cfg->{path} // '');
+
+ my $idx = 0;
+ for my $path (@paths) {
+
+ my $multifunction = 0;
+ if ($path !~ m/\.[a-f0-9]/i) {
+ # whole device, add .0 (must exist)
+ $path = "$path.0";
+ $multifunction = 1;
+ }
+
+ my $info = PVE::SysFSTools::pci_device_info($path, 1);
+ die "pci device '$path' not found\n" if !defined($info);
+
+ my $correct_props = {
+ id => "$info->{vendor}:$info->{device}",
+ iommugroup => $info->{iommugroup},
+ };
+
+ if (defined($info->{'subsystem_vendor'}) && defined($info->{'subsystem_device'})) {
+ $correct_props->{'subsystem-id'} = "$info->{'subsystem_vendor'}:$info->{'subsystem_device'}";
+ }
+
+ for my $prop (sort keys %$correct_props) {
+ next if $prop eq 'iommugroup' && $idx > 0; # check iommu only on the first device
+
+ next if !defined($correct_props->{$prop}) && !defined($cfg->{$prop});
+ die "no '$prop' for device '$path'\n"
+ if defined($correct_props->{$prop}) && !defined($cfg->{$prop});
+ die "'$prop' configured but should not be\n"
+ if !defined($correct_props->{$prop}) && defined($cfg->{$prop});
+
+ my $correct_prop = $correct_props->{$prop};
+ $correct_prop =~ s/0x//g;
+ my $configured_prop = $cfg->{$prop};
+ $configured_prop =~ s/0x//g;
+
+ die "'$prop' does not match for '$name' ($correct_prop != $configured_prop)\n"
+ if $correct_prop ne $configured_prop;
+ }
+ $idx++;
+ }
+
+ return 1;
+};
+
+sub config {
+ return cfs_read_file($FILENAME);
+}
+
+sub lock_pci_config {
+ my ($code, $errmsg) = @_;
+
+ cfs_lock_file($FILENAME, undef, $code);
+ if (my $err = $@) {
+ $errmsg ? die "$errmsg: $err" : die $err;
+ }
+}
+
+sub write_pci_config {
+ my ($cfg) = @_;
+
+ cfs_write_file($FILENAME, $cfg);
+}
+
+sub find_on_current_node {
+ my ($id) = @_;
+
+ my $cfg = PVE::Resource::PCI::config();
+ my $node = PVE::INotify::nodename();
+
+ # ignore errors
+ return get_node_mapping($cfg, $id, $node);
+}
+
+sub get_node_mapping {
+ my ($cfg, $id, $nodename) = @_;
+
+ return undef if !defined($cfg->{ids}->{$id});
+
+ my $res = [];
+ for my $map ($cfg->{ids}->{$id}->{map}->@*) {
+ my $entry = eval { parse_property_string($map_fmt, $map) };
+ warn $@ if $@;
+ if ($entry && $entry->{node} eq $nodename) {
+ push $res->@*, $entry;
+ }
+ }
+
+ return $res;
+}
+
+PVE::Resource::PCI->register();
+PVE::Resource::PCI->init();
+
+1;
diff --git a/src/PVE/Resource/USB.pm b/src/PVE/Resource/USB.pm
new file mode 100644
index 0000000..05ea789
--- /dev/null
+++ b/src/PVE/Resource/USB.pm
@@ -0,0 +1,183 @@
+package PVE::Resource::USB;
+
+use strict;
+use warnings;
+
+use PVE::Cluster qw(cfs_register_file cfs_read_file cfs_lock_file cfs_write_file);
+use PVE::INotify;
+use PVE::JSONSchema qw(get_standard_option parse_property_string);
+use PVE::SectionConfig;
+use PVE::SysFSTools;
+
+use base qw(PVE::SectionConfig);
+
+my $FILENAME = 'resource/usb.cfg';
+
+cfs_register_file($FILENAME,
+ sub { __PACKAGE__->parse_config(@_); },
+ sub { __PACKAGE__->write_config(@_); });
+
+
+# so we don't have to repeat the type every time
+sub parse_section_header {
+ my ($class, $line) = @_;
+
+ if ($line =~ m/^(\S+)\s*$/) {
+ my $id = $1;
+ my $errmsg = undef; # set if you want to skip whole section
+ eval { PVE::JSONSchema::pve_verify_configid($id) };
+ $errmsg = $@ if $@;
+ my $config = {}; # to return additional attributes
+ return ('usb', $id, $errmsg, $config);
+ }
+ return undef;
+}
+
+sub format_section_header {
+ my ($class, $type, $sectionId, $scfg, $done_hash) = @_;
+
+ return "$sectionId\n";
+}
+
+sub type {
+ return 'usb';
+}
+
+my $map_fmt = {
+ node => get_standard_option('pve-node'),
+ 'id' => {
+ description => "The vendor and device ID that is expected. If a USB path".
+ " is given, it is only used for detecting hardware changes",
+ type => 'string',
+ pattern => qr/^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{4}$/,
+ },
+ path => {
+ description => "The path to the usb device.",
+ type => 'string',
+ optional => 1,
+ pattern => qr/^(\d+)\-(\d+(\.\d+)*)$/,
+ },
+ description => {
+ description => "Description of the node specific device.",
+ type => 'string',
+ optional => 1,
+ maxLength => 4096,
+ },
+};
+
+my $defaultData = {
+ propertyList => {
+ id => {
+ type => 'string',
+ description => "The ID of the logical PCI resource.",
+ format => 'pve-configid',
+ },
+ description => {
+ description => "Description of the logical PCI device.",
+ type => 'string',
+ optional => 1,
+ maxLength => 4096,
+ },
+ map => {
+ type => 'array',
+ description => 'A list of maps for the cluster nodes.',
+ items => {
+ type => 'string',
+ format => $map_fmt,
+ },
+ },
+ },
+};
+sub private {
+ return $defaultData;
+}
+
+sub options {
+ return {
+ description => { optional => 1 },
+ map => {},
+ };
+}
+
+# checks if the given device is valid for the current node
+sub assert_valid {
+ my ($name, $cfg) = @_;
+
+ my $id = $cfg->{id};
+
+ my $usb_list = PVE::SysFSTools::scan_usb();
+
+ my $info;
+ if (my $path = $cfg->{path}) {
+ for my $dev (@$usb_list) {
+ next if !$dev->{usbpath} || !$dev->{busnum};
+ my $usbpath = "$dev->{busnum}-$dev->{usbpath}";
+ next if $usbpath ne $path;
+ $info = $dev;
+ }
+ die "usb device '$path' not found\n" if !defined($info);
+
+ my $realId = "$info->{vendid}:$info->{prodid}";
+ die "'id' does not match for '$name' ($realId != $id)\n"
+ if $realId ne $id;
+ } else {
+ for my $dev (@$usb_list) {
+ my $realId = "$dev->{vendid}:$dev->{prodid}";
+ next if $realId ne $id;
+ $info = $dev;
+ }
+ die "usb device '$id' not found\n" if !defined($info);
+ }
+
+ return 1;
+};
+
+sub config {
+ return cfs_read_file($FILENAME);
+}
+
+sub lock_usb_config {
+ my ($code, $errmsg) = @_;
+
+ cfs_lock_file($FILENAME, undef, $code);
+ if (my $err = $@) {
+ $errmsg ? die "$errmsg: $err" : die $err;
+ }
+}
+
+sub write_usb_config {
+ my ($cfg) = @_;
+
+ cfs_write_file($FILENAME, $cfg);
+}
+
+sub find_on_current_node {
+ my ($id) = @_;
+
+ my $cfg = config();
+ my $node = PVE::INotify::nodename();
+
+ return get_node_mapping($cfg, $id, $node);
+}
+
+sub get_node_mapping {
+ my ($cfg, $id, $nodename) = @_;
+
+ return undef if !defined($cfg->{ids}->{$id});
+
+ my $res = [];
+ for my $map ($cfg->{ids}->{$id}->{map}->@*) {
+ my $entry = eval { parse_property_string($map_fmt, $map) };
+ warn $@ if $@;
+ if ($entry && $entry->{node} eq $nodename) {
+ push $res->@*, $entry;
+ }
+ }
+
+ return $res;
+}
+
+PVE::Resource::USB->register();
+PVE::Resource::USB->init();
+
+1;
--
2.30.2
More information about the pve-devel
mailing list