[pve-devel] [PATCH v2 qemu-server 2/9] add memory parser
Alexandre Derumier
aderumier at odiso.com
Wed Jan 4 07:42:56 CET 2023
Signed-off-by: Alexandre Derumier <aderumier at odiso.com>
---
PVE/API2/Qemu.pm | 12 ++++++-
PVE/QemuConfig.pm | 4 +--
PVE/QemuMigrate.pm | 6 ++--
PVE/QemuServer.pm | 24 ++++++-------
PVE/QemuServer/Helpers.pm | 3 +-
PVE/QemuServer/Memory.pm | 74 ++++++++++++++++++++++++++++++++-------
6 files changed, 91 insertions(+), 32 deletions(-)
diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index c87602d..4ffa973 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -32,6 +32,7 @@ use PVE::QemuServer::Drive;
use PVE::QemuServer::ImportDisk;
use PVE::QemuServer::Monitor qw(mon_cmd);
use PVE::QemuServer::Machine;
+use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::QemuMigrate;
use PVE::RPCEnvironment;
use PVE::AccessControl;
@@ -1608,7 +1609,16 @@ my $update_vm_api = sub {
}
if ($param->{memory} || defined($param->{balloon})) {
- my $maxmem = $param->{memory} || $conf->{pending}->{memory} || $conf->{memory} || $defaults->{memory};
+
+ my $maxmem = undef;
+ if ($param->{memory}) {
+ $maxmem = get_current_memory($param->{memory});
+ } elsif ($conf->{pending}->{memory}) {
+ $maxmem = get_current_memory($conf->{pending}->{memory});
+ } else {
+ $maxmem = get_current_memory($conf->{memory});
+ }
+
my $balloon = defined($param->{balloon}) ? $param->{balloon} : $conf->{pending}->{balloon} || $conf->{balloon};
die "balloon value too large (must be smaller than assigned memory)\n"
diff --git a/PVE/QemuConfig.pm b/PVE/QemuConfig.pm
index 051382c..999e658 100644
--- a/PVE/QemuConfig.pm
+++ b/PVE/QemuConfig.pm
@@ -12,6 +12,7 @@ use PVE::QemuServer::Helpers;
use PVE::QemuServer::Monitor qw(mon_cmd);
use PVE::QemuServer;
use PVE::QemuServer::Machine;
+use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::Storage;
use PVE::Tools;
use PVE::Format qw(render_bytes render_duration);
@@ -208,8 +209,7 @@ sub __snapshot_save_vmstate {
$target = PVE::QemuServer::find_vmstate_storage($conf, $storecfg);
}
- my $defaults = PVE::QemuServer::load_defaults();
- my $mem_size = $conf->{memory} // $defaults->{memory};
+ my $mem_size = get_current_memory($conf->{memory});
my $driver_state_size = 500; # assume 500MB is enough to safe all driver state;
# our savevm-start does live-save of the memory until the space left in the
# volume is just enough for the remaining memory content + internal state
diff --git a/PVE/QemuMigrate.pm b/PVE/QemuMigrate.pm
index 5e466d9..2eccf67 100644
--- a/PVE/QemuMigrate.pm
+++ b/PVE/QemuMigrate.pm
@@ -26,6 +26,7 @@ use PVE::QemuServer::Drive;
use PVE::QemuServer::Helpers qw(min_version);
use PVE::QemuServer::Machine;
use PVE::QemuServer::Monitor qw(mon_cmd);
+use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::QemuServer;
use PVE::AbstractMigrate;
@@ -1024,7 +1025,8 @@ sub phase2_start_remote_cluster {
my $remote_vmid = $self->{opts}->{remote}->{vmid};
# like regular start but with some overhead accounted for
- my $timeout = PVE::QemuServer::Helpers::config_aware_timeout($self->{vmconf}) + 10;
+ my $memory = get_current_memory($self->{vmconf}->{memory});
+ my $timeout = PVE::QemuServer::Helpers::config_aware_timeout($self->{vmconf}, $memory) + 10;
my $res = PVE::Tunnel::write_tunnel($self->{tunnel}, $timeout, "start", $params);
@@ -1179,7 +1181,7 @@ sub phase2 {
$qemu_migrate_params->{'downtime-limit'} = int($migrate_downtime);
# set cachesize to 10% of the total memory
- my $memory = $conf->{memory} || $defaults->{memory};
+ my $memory = get_current_memory($conf->{memory});
my $cachesize = int($memory * 1048576 / 10);
$cachesize = round_powerof2($cachesize);
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 39fc6b0..5847a78 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -52,7 +52,7 @@ use PVE::QemuServer::CGroup;
use PVE::QemuServer::CPUConfig qw(print_cpu_device get_cpu_options);
use PVE::QemuServer::Drive qw(is_valid_drivename drive_is_cloudinit drive_is_cdrom drive_is_read_only parse_drive print_drive);
use PVE::QemuServer::Machine;
-use PVE::QemuServer::Memory;
+use PVE::QemuServer::Memory qw(get_current_memory);
use PVE::QemuServer::Monitor qw(mon_cmd);
use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr print_pcie_root_port parse_hostpci);
use PVE::QemuServer::USB qw(parse_usb_device);
@@ -340,11 +340,8 @@ my $confdesc = {
},
memory => {
optional => 1,
- type => 'integer',
- description => "Amount of RAM for the VM in MB. This is the maximum available memory when"
- ." you use the balloon device.",
- minimum => 16,
- default => 512,
+ type => 'string',
+ format => $PVE::QemuServer::Memory::memory_fmt
},
balloon => {
optional => 1,
@@ -2928,8 +2925,7 @@ sub vmstatus {
$d->{cpus} = $conf->{vcpus} if $conf->{vcpus};
$d->{name} = $conf->{name} || "VM $vmid";
- $d->{maxmem} = $conf->{memory} ? $conf->{memory}*(1024*1024)
- : $defaults->{memory}*(1024*1024);
+ $d->{maxmem} = get_current_memory($conf->{memory})*(1024*1024);
if ($conf->{balloon}) {
$d->{balloon_min} = $conf->{balloon}*(1024*1024);
@@ -5025,7 +5021,7 @@ sub vmconfig_hotplug_pending {
# enable balloon device is not hotpluggable
die "skip\n" if defined($conf->{balloon}) && $conf->{balloon} == 0;
# here we reset the ballooning value to memory
- my $balloon = $conf->{memory} || $defaults->{memory};
+ my $balloon = get_current_memory($conf->{memory});
mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
} elsif ($fast_plug_option->{$opt}) {
# do nothing
@@ -5038,7 +5034,7 @@ sub vmconfig_hotplug_pending {
vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
} elsif ($opt =~ m/^memory$/) {
die "skip\n" if !$hotplug_features->{memory};
- PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt);
+ PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults);
} elsif ($opt eq 'cpuunits') {
$cgroup->change_cpu_shares(undef);
} elsif ($opt eq 'cpulimit') {
@@ -5093,7 +5089,8 @@ sub vmconfig_hotplug_pending {
# allow manual ballooning if shares is set to zero
if ((defined($conf->{shares}) && ($conf->{shares} == 0))) {
- my $balloon = $conf->{pending}->{balloon} || $conf->{memory} || $defaults->{memory};
+ my $memory = get_current_memory($conf->{memory});
+ my $balloon = $conf->{pending}->{balloon} || $memory;
mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
}
} elsif ($opt =~ m/^net(\d+)$/) {
@@ -5113,7 +5110,7 @@ sub vmconfig_hotplug_pending {
$vmid, $opt, $value, $arch, $machine_type);
} elsif ($opt =~ m/^memory$/) { #dimms
die "skip\n" if !$hotplug_features->{memory};
- $value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt, $value);
+ PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $conf->{pending}->{$opt});
} elsif ($opt eq 'cpuunits') {
my $new_cpuunits = PVE::CGroup::clamp_cpu_shares($conf->{pending}->{$opt}); #clamp
$cgroup->change_cpu_shares($new_cpuunits);
@@ -5790,7 +5787,8 @@ sub vm_start_nolock {
push @$cmd, '-S';
}
- my $start_timeout = $params->{timeout} // config_aware_timeout($conf, $resume);
+ my $memory = get_current_memory($conf->{memory});
+ my $start_timeout = $params->{timeout} // config_aware_timeout($conf, $memory, $resume);
my $pci_devices = {}; # host pci devices
for (my $i = 0; $i < $PVE::QemuServer::PCI::MAX_HOSTPCI_DEVICES; $i++) {
diff --git a/PVE/QemuServer/Helpers.pm b/PVE/QemuServer/Helpers.pm
index e91f906..9115d50 100644
--- a/PVE/QemuServer/Helpers.pm
+++ b/PVE/QemuServer/Helpers.pm
@@ -143,8 +143,7 @@ sub version_cmp {
}
sub config_aware_timeout {
- my ($config, $is_suspended) = @_;
- my $memory = $config->{memory};
+ my ($config, $memory, $is_suspended) = @_;
my $timeout = 30;
# Based on user reported startup time for vm with 512GiB @ 4-5 minutes
diff --git a/PVE/QemuServer/Memory.pm b/PVE/QemuServer/Memory.pm
index 6c1cd94..59e51c8 100644
--- a/PVE/QemuServer/Memory.pm
+++ b/PVE/QemuServer/Memory.pm
@@ -8,10 +8,45 @@ use PVE::Exception qw(raise raise_param_exc);
use PVE::QemuServer;
use PVE::QemuServer::Monitor qw(mon_cmd);
+use base qw(Exporter);
+
+our @EXPORT_OK = qw(
+get_current_memory
+);
my $MAX_NUMA = 8;
my $STATICMEM = 1024;
+my $memory_fmt = {
+ current => {
+ description => "Current amount of online RAM for the VM in MB. This is the maximum available memory when"
+ ." you use the balloon device.",
+ type => 'integer',
+ default_key => 1,
+ optional => 1,
+ minimum => 16,
+ default => 512,
+ }
+};
+
+sub print_memory {
+ my $memory = shift;
+
+ return PVE::JSONSchema::print_property_string($memory, $memory_fmt);
+}
+
+sub parse_memory {
+ my ($value) = @_;
+
+ my $current_default = $memory_fmt->{current}->{default};
+ my $res = { current => $current_default };
+ return $res if !defined($value);
+
+ $res = eval { PVE::JSONSchema::parse_property_string($memory_fmt, $value) };
+ die $@ if $@;
+ return $res;
+}
+
my $_host_bits;
my sub get_host_phys_address_bits {
return $_host_bits if defined($_host_bits);
@@ -63,6 +98,13 @@ my sub get_max_mem {
return $bits_to_max_mem > 4*1024*1024 ? 4*1024*1024 : $bits_to_max_mem;
}
+sub get_current_memory {
+ my ($value) = @_;
+
+ my $memory = parse_memory($value);
+ return $memory->{current};
+}
+
sub get_numa_node_list {
my ($conf) = @_;
my @numa_map;
@@ -155,17 +197,21 @@ sub foreach_reverse_dimm {
}
sub qemu_memory_hotplug {
- my ($vmid, $conf, $defaults, $opt, $value) = @_;
+ my ($vmid, $conf, $defaults, $value) = @_;
+
+ return if !PVE::QemuServer::check_running($vmid);
- return $value if !PVE::QemuServer::check_running($vmid);
+ my $oldmem = parse_memory($conf->{memory});
+ my $newmem = parse_memory($value);
+
+ my $memory = $oldmem->{current};
+ $value = $newmem->{current};
+
+ return if $value == $memory;
my $sockets = 1;
$sockets = $conf->{sockets} if $conf->{sockets};
- my $memory = $conf->{memory} || $defaults->{memory};
- $value = $defaults->{memory} if !$value;
- return $value if $value == $memory;
-
my $static_memory = $STATICMEM;
$static_memory = $static_memory * $sockets if ($conf->{hugepages} && $conf->{hugepages} == 1024);
@@ -180,7 +226,7 @@ sub qemu_memory_hotplug {
foreach_dimm($conf, $vmid, $value, $sockets, sub {
my ($conf, $vmid, $name, $dimm_size, $numanode, $current_size, $memory) = @_;
- return if $current_size <= $conf->{memory};
+ return if $current_size <= get_current_memory($conf->{memory});
if ($conf->{hugepages}) {
$numa_hostmap = get_numa_guest_to_host_map($conf) if !$numa_hostmap;
@@ -219,7 +265,8 @@ sub qemu_memory_hotplug {
die $err;
}
#update conf after each succesful module hotplug
- $conf->{memory} = $current_size;
+ $newmem->{current} = $current_size;
+ $conf->{memory} = print_memory($newmem);
PVE::QemuConfig->write_config($vmid, $conf);
});
@@ -228,7 +275,8 @@ sub qemu_memory_hotplug {
foreach_reverse_dimm($conf, $vmid, $value, $sockets, sub {
my ($conf, $vmid, $name, $dimm_size, $numanode, $current_size, $memory) = @_;
- return if $current_size >= $conf->{memory};
+ return if $current_size >= get_current_memory($conf->{memory});
+
print "try to unplug memory dimm $name\n";
my $retry = 0;
@@ -242,7 +290,8 @@ sub qemu_memory_hotplug {
}
#update conf after each succesful module unplug
- $conf->{memory} = $current_size;
+ $newmem->{current} = $current_size;
+ $conf->{memory} = print_memory($newmem);
eval { PVE::QemuServer::qemu_objectdel($vmid, "mem-$name"); };
PVE::QemuConfig->write_config($vmid, $conf);
@@ -270,7 +319,8 @@ sub qemu_dimm_list {
sub config {
my ($conf, $vmid, $sockets, $cores, $defaults, $hotplug_features, $cmd) = @_;
- my $memory = $conf->{memory} || $defaults->{memory};
+ my $memory = get_current_memory($conf->{memory});
+
my $static_memory = 0;
if ($hotplug_features->{memory}) {
@@ -493,7 +543,7 @@ sub hugepages_topology {
return if !$conf->{numa};
my $defaults = PVE::QemuServer::load_defaults();
- my $memory = $conf->{memory} || $defaults->{memory};
+ my $memory = get_current_memory($conf->{memory});
my $static_memory = 0;
my $sockets = 1;
$sockets = $conf->{smp} if $conf->{smp}; # old style - no longer iused
--
2.30.2
More information about the pve-devel
mailing list