[pve-devel] [PATCH pve-kernel-meta v2 4/8] proxmox-boot: refresh based on bootloader config instead of bootmode
Stoiko Ivanov
s.ivanov at proxmox.com
Thu Mar 3 20:07:53 CET 2022
ignore the current bootmode (uefi/legacy) when deciding which configs
to generate - make this decision based on the found boot loader
configs on the ESP.
Change systemd-boot to load the kernel+initrd from the ESPs root where
grub needs them. This prevents the double use of space for systems
having both boot-loaders present (since FAT does not support
symlinks). While this is against the recommendations of the
boot-loader-specification [0]) it works fine (and we deviate from [0]
by not having the machine-id in the kernel subdirs anyways).
The UEFI spec on the directory structure [1], also should be fine with
it.
Additionally adapt the output of `p-b-t status` to the new paths
[0] https://systemd.io/BOOT_LOADER_SPECIFICATION/
[1] section 13.3.1.3 of
https://uefi.org/sites/default/files/resources/UEFI_Spec_2_9_2021_03_18.pdf
Signed-off-by: Stoiko Ivanov <s.ivanov at proxmox.com>
---
adapted to use the helpers added in patch 3/8
bin/proxmox-boot-tool | 14 +++----
proxmox-boot/zz-proxmox-boot | 78 ++++++++++++------------------------
2 files changed, 32 insertions(+), 60 deletions(-)
diff --git a/bin/proxmox-boot-tool b/bin/proxmox-boot-tool
index a499154..31a5552 100755
--- a/bin/proxmox-boot-tool
+++ b/bin/proxmox-boot-tool
@@ -396,20 +396,18 @@ _status_detail() {
result=""
if mountpoint_has_sd_boot "${mountpoint}"; then
- if [ ! -d "${mountpoint}/$PMX_ESP_DIR" ]; then
- warn "${path}/$PMX_ESP_DIR does not exist"
- fi
- versions_uefi=$(ls -1 ${mountpoint}/$PMX_ESP_DIR | awk '{printf (NR>1?", ":"") $0}')
- result="uefi (versions: ${versions_uefi})"
+ result="uefi"
fi
if mountpoint_has_grub "${mountpoint}"; then
- versions_grub=$(ls -1 ${mountpoint}/vmlinuz-* | awk '{ gsub(/.*\/vmlinuz-/, ""); printf (NR>1?", ":"") $0 }')
if [ -n "$result" ]; then
- result="${result}, grub (versions: ${versions_grub})"
+ result="${result}, grub"
else
- result="grub (versions: ${versions_grub})"
+ result="grub"
fi
fi
+ versions=$(find "${mountpoint}" -maxdepth 1 -name 'vmlinuz-*' | awk '{ gsub(/.*\/vmlinuz-/, ""); printf (NR>1?", ":"") $0 }')
+ result="${result} (versions: ${versions})"
+
echo "$curr_uuid is configured with: $result"
umount "${mountpoint}" || \
{ warn "umount of ${path} failed - failure"; exit 0; }
diff --git a/proxmox-boot/zz-proxmox-boot b/proxmox-boot/zz-proxmox-boot
index a6629aa..fa0ea4a 100755
--- a/proxmox-boot/zz-proxmox-boot
+++ b/proxmox-boot/zz-proxmox-boot
@@ -75,33 +75,33 @@ update_esp_func() {
{ warn "creation of mountpoint ${mountpoint} failed - skipping"; return; }
mount "${path}" "${mountpoint}" || \
{ warn "mount of ${path} failed - skipping"; return; }
- if [ -d /sys/firmware/efi ]; then
- if ! mountpoint_has_sd_boot "${mountpoint}"; then
- warn "${path} contains no loader.conf - skipping"
- return
- fi
- if [ ! -d "${mountpoint}/$PMX_ESP_DIR" ]; then
- warn "${path}/$PMX_ESP_DIR does not exist- skipping"
- return
- fi
- elif ! mountpoint_has_grub "${mountpoint}"; then
- warn "${path} contains no grub directory - skipping"
+ sd_boot=""
+ grub=""
+ if mountpoint_has_sd_boot "${mountpoint}"; then
+ sd_boot=1
+ fi
+ if mountpoint_has_grub "${mountpoint}"; then
+ grub=1
+ fi
+ if [ -z "$sd_boot" ] && [ -z "$grub" ]; then
+ warn "${path} contains no bootloader config - skipping!"
return
fi
warn "Copying and configuring kernels on ${path}"
- copy_and_config_kernels "${mountpoint}"
+ copy_and_config_kernels "${mountpoint}" "${sd_boot}"
pinned_kernel=$(get_first_line "${PINNED_KERNEL_CONF}")
if [ -e "${NEXT_BOOT_PIN}" ]; then
pinned_kernel=$(get_first_line "${NEXT_BOOT_PIN}")
fi
- if [ -d /sys/firmware/efi ]; then
+ if [ -n "$sd_boot" ]; then
set_systemd_boot_default "${mountpoint}" "${pinned_kernel}"
- remove_old_kernels_efi "${mountpoint}"
- else
+ remove_old_kernels "${mountpoint}"
+ fi
+ if [ -n "$grub" ]; then
set_grub_default "${pinned_kernel}"
- remove_old_kernels_legacy "${mountpoint}"
+ remove_old_kernels "${mountpoint}"
mount --bind "${mountpoint}" "/boot"
update-grub
umount /boot
@@ -116,7 +116,7 @@ update_esp_func() {
copy_and_config_kernels() {
esp="$1"
-
+ sd_boot="$2"
for kver in ${BOOT_KVERS}; do
@@ -132,52 +132,25 @@ copy_and_config_kernels() {
continue
fi
- if [ -d /sys/firmware/efi ]; then
-
- warn " Copying kernel and creating boot-entry for ${kver}"
- KERNEL_ESP_DIR="${PMX_ESP_DIR}/${kver}"
- KERNEL_LIVE_DIR="${esp}/${KERNEL_ESP_DIR}"
- mkdir -p "${KERNEL_LIVE_DIR}"
- cp --preserve=timestamps "${linux_image}" "${KERNEL_LIVE_DIR}/"
- cp --preserve=timestamps "${initrd}" "${KERNEL_LIVE_DIR}/"
+ warn " Preparing kernel and initrd for ${kver}"
+ cp --preserve=timestamps "${linux_image}" "${esp}/"
+ cp --preserve=timestamps "${initrd}" "${esp}/"
- # create loader entry
+ if [ -n "$sd_boot" ]; then
+ # create loader entry
cat > "${esp}/loader/entries/proxmox-${kver}.conf" <<- EOF
title ${LOADER_TITLE}
version ${kver}
options ${CMDLINE}
- linux /${KERNEL_ESP_DIR}/vmlinuz-${kver}
- initrd /${KERNEL_ESP_DIR}/initrd.img-${kver}
+ linux /vmlinuz-${kver}
+ initrd /initrd.img-${kver}
EOF
- else
- warn " Copying kernel ${kver}"
- cp --preserve=timestamps "${linux_image}" "${esp}/"
- cp --preserve=timestamps "${initrd}" "${esp}/"
- fi
- done
-
-}
-
-remove_old_kernels_efi() {
- esp="$1"
-
- for kerneldir in "${esp}/${PMX_ESP_DIR}"/*; do
- if [ ! -d "${kerneldir}" ]; then
- warn " ${kerneldir} is not a directory - skipping"
- continue
fi
-
- kver="$(echo "${kerneldir}" | sed -r "s#^${esp}/${PMX_ESP_DIR}/(.+)\$#\\1#")"
-
- echo "${BOOT_KVERS}" | grep -q "${kver}" && continue;
- warn " Removing old version ${kver}"
- rm -rf "${kerneldir}"
- rm -f "${esp}/loader/entries/proxmox-${kver}.conf"
done
}
-remove_old_kernels_legacy() {
+remove_old_kernels() {
esp="$1"
for kernel in "${esp}/"vmlinuz-*; do
@@ -187,6 +160,7 @@ remove_old_kernels_legacy() {
warn " Removing old version ${kver}"
rm -rf "${esp}/vmlinuz-${kver}"
rm -rf "${esp}/initrd.img-${kver}"
+ rm -rf "${esp}/loader/entries/proxmox-${kver}.conf"
done
}
--
2.30.2
More information about the pve-devel
mailing list