[pve-devel] [PATCH storage v2 3/3] disks: allow add_storage for already configured local storage
Aaron Lauterer
a.lauterer at proxmox.com
Fri Jul 15 13:58:08 CEST 2022
One of the smaller annoyances, especially for less experienced users, is
the fact, that when creating a local storage (ZFS, LVM (thin), dir) in a
cluster, one can only leave the "Add Storage" option enabled the first
time.
On any following node, this option needed to be disabled and the new
node manually added to the list of nodes for that storage.
This patch changes the behavior. If a storage of the same name already
exists, it will verify that necessary parameters match the already
existing one.
Then, if the 'nodes' parameter is set, it adds the current node and
updates the storage config.
In case there is no nodes list, nothing else needs to be done, and the
GUI will stop showing the question mark for the configured, but until
then, not existing local storage.
Signed-off-by: Aaron Lauterer <a.lauterer at proxmox.com>
---
changes since v1:
- restructured the logic a bit. checks still need to be done the same,
but the create or update logic is in its own
API2::Storage::Config->create_or_update function which then either
calls the create or update API directly. This reduces a lot of code
repition.
- in Storage::assert_sid_usable_on_node additionally checks if the
parameter is configured in the storage and fails if not. We would have
gotten warnings about using and undef in a string concat due to how the
other error was presented.
PVE/API2/Disks/Directory.pm | 8 +++++---
PVE/API2/Disks/LVM.pm | 8 +++++---
PVE/API2/Disks/LVMThin.pm | 8 +++++---
PVE/API2/Disks/ZFS.pm | 9 ++++++---
PVE/API2/Storage/Config.pm | 22 ++++++++++++++++++++++
PVE/Storage.pm | 27 +++++++++++++++++++++++++++
6 files changed, 70 insertions(+), 12 deletions(-)
diff --git a/PVE/API2/Disks/Directory.pm b/PVE/API2/Disks/Directory.pm
index 07190de..581e970 100644
--- a/PVE/API2/Disks/Directory.pm
+++ b/PVE/API2/Disks/Directory.pm
@@ -209,7 +209,10 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $verify_params = { path => $path };
+ PVE::Storage::assert_sid_usable_on_node($name, $node, 'dir', $verify_params)
+ if $param->{add_storage};
my $mounted = PVE::Diskmanage::mounted_paths();
die "a mountpoint for '${name}' already exists: ${path} ($1)\n" if $mounted->{$path};
@@ -293,8 +296,7 @@ __PACKAGE__->register_method ({
path => $path,
nodes => $node,
};
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update($name, $node, $storage_params);
}
});
};
diff --git a/PVE/API2/Disks/LVM.pm b/PVE/API2/Disks/LVM.pm
index a27afe2..e9b3f25 100644
--- a/PVE/API2/Disks/LVM.pm
+++ b/PVE/API2/Disks/LVM.pm
@@ -150,7 +150,10 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $verify_params = { vgname => $name };
+ PVE::Storage::assert_sid_usable_on_node($name, $node, 'lvm', $verify_params)
+ if $param->{add_storage};
die "volume group with name '${name}' already exists\n"
if PVE::Storage::LVMPlugin::lvm_vgs()->{$name};
@@ -177,8 +180,7 @@ __PACKAGE__->register_method ({
shared => 0,
nodes => $node,
};
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update($name, $node, $storage_params);
}
});
};
diff --git a/PVE/API2/Disks/LVMThin.pm b/PVE/API2/Disks/LVMThin.pm
index 690c183..fb61489 100644
--- a/PVE/API2/Disks/LVMThin.pm
+++ b/PVE/API2/Disks/LVMThin.pm
@@ -108,7 +108,10 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $verify_params = { vgname => $name, thinpool => $name };
+ PVE::Storage::assert_sid_usable_on_node($name, $node, 'lvmthin', $verify_params)
+ if $param->{add_storage};
die "volume group with name '${name}' already exists\n"
if PVE::Storage::LVMPlugin::lvm_vgs()->{$name};
@@ -155,8 +158,7 @@ __PACKAGE__->register_method ({
content => 'rootdir,images',
nodes => $node,
};
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update($name, $node, $storage_params);
}
});
};
diff --git a/PVE/API2/Disks/ZFS.pm b/PVE/API2/Disks/ZFS.pm
index 51380c4..e1c4b59 100644
--- a/PVE/API2/Disks/ZFS.pm
+++ b/PVE/API2/Disks/ZFS.pm
@@ -342,6 +342,7 @@ __PACKAGE__->register_method ({
my $name = $param->{name};
my $node = $param->{node};
my $devs = [PVE::Tools::split_list($param->{devices})];
+ my $node = $param->{node};
my $raidlevel = $param->{raidlevel};
my $compression = $param->{compression} // 'on';
@@ -349,7 +350,10 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
}
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $verify_params = { pool => $name };
+ PVE::Storage::assert_sid_usable_on_node($name, $node, 'zfspool', $verify_params)
+ if $param->{add_storage};
my $pools = get_pool_data();
die "pool '${name}' already exists on node '$node'\n"
@@ -439,8 +443,7 @@ __PACKAGE__->register_method ({
content => 'rootdir,images',
nodes => $param->{node},
};
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update($name, $node, $storage_params);
}
};
diff --git a/PVE/API2/Storage/Config.pm b/PVE/API2/Storage/Config.pm
index 6bd770e..2ea91b7 100755
--- a/PVE/API2/Storage/Config.pm
+++ b/PVE/API2/Storage/Config.pm
@@ -65,6 +65,28 @@ sub cleanup_storages_for_node {
}
}
+# Decides if a storage needs to be created or updated. An update is needed, if
+# the storage has a node list configured, then the current node will be added.
+# Check before if this is a sensible action, e.g. storage type and other params
+# that need to match
+sub create_or_update {
+ my ($self, $sid, $node, $storage_params) = @_;
+
+ my $cfg = PVE::Storage::config();
+ if (my $scfg = PVE::Storage::storage_config($cfg, $sid, 1)) {
+ if ($scfg->{nodes}) {
+ $scfg->{nodes}->{$node} = 1;
+ $self->update({
+ nodes => join(',', sort keys $scfg->{nodes}->%*),
+ storage => $sid,
+ });
+ print "Added '${node}' to nodes for storage '${sid}'\n";
+ }
+ } else {
+ $self->create($storage_params);
+ }
+}
+
__PACKAGE__->register_method ({
name => 'index',
path => '',
diff --git a/PVE/Storage.pm b/PVE/Storage.pm
index b9c53a1..21d575c 100755
--- a/PVE/Storage.pm
+++ b/PVE/Storage.pm
@@ -2127,6 +2127,33 @@ sub assert_sid_unused {
return undef;
}
+# Checks if storage id can be used on the node, intended for local storage types
+# Compares the type and verify_params hash against a potentially configured
+# storage. Use it for storage parameters that need to be the same throughout
+# the cluster. For example, pool for ZFS, vg_name for LVM, ...
+sub assert_sid_usable_on_node {
+ my ($sid, $node, $type, $verify_params) = @_;
+
+ my $cfg = config();
+ if (my $scfg = storage_config($cfg, $sid, 1)) {
+ $node = PVE::INotify::nodename() if !$node || ($node eq 'localhost');
+ die "Storage ID '${sid}' already exists on node ${node}\n"
+ if defined($scfg->{nodes}) && $scfg->{nodes}->{$node};
+
+ $verify_params->{type} = $type;
+ for my $key (keys %$verify_params) {
+ if (!defined($scfg->{$key})) {
+ die "Option '${key}' is not configured for storage '$sid', "
+ ."expected it to be '$verify_params->{$key}'";
+ }
+ if ($verify_params->{$key} ne $scfg->{$key}) {
+ die "Option '${key}' ($verify_params->{$key}) does not match "
+ ."existing storage configuration '$scfg->{$key}'\n";
+ }
+ }
+ }
+}
+
# removes leading/trailing spaces and (back)slashes completely
# substitutes every non-ASCII-alphanumerical char with '_', except '_.-'
sub normalize_content_filename {
--
2.30.2
More information about the pve-devel
mailing list