[pve-devel] [PATCH v3 guest-common 2/3] add tunnel helper module

Fabian Grünbichler f.gruenbichler at proxmox.com
Wed Jan 19 15:30:23 CET 2022


On January 3, 2022 1:30 pm, Fabian Ebner wrote:
> A few nits inline.
> 
> Am 12/22/21 um 14:52 schrieb Fabian Grünbichler:
>> lifted from PVE::QemuMigrate, abstracting away use-case specific data.
>> 
>> Signed-off-by: Fabian Grünbichler <f.gruenbichler at proxmox.com>
>> ---
>>   src/Makefile      |   1 +
>>   debian/control    |   1 +
>>   src/PVE/Tunnel.pm | 356 ++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 358 insertions(+)
>>   create mode 100644 src/PVE/Tunnel.pm
>> 
>> diff --git a/src/Makefile b/src/Makefile
>> index 0298d3f..d82162c 100644
>> --- a/src/Makefile
>> +++ b/src/Makefile
>> @@ -12,6 +12,7 @@ install: PVE
>>   	install -m 0644 PVE/ReplicationConfig.pm ${PERL5DIR}/PVE/
>>   	install -m 0644 PVE/ReplicationState.pm ${PERL5DIR}/PVE/
>>   	install -m 0644 PVE/Replication.pm ${PERL5DIR}/PVE/
>> +	install -m 0644 PVE/Tunnel.pm ${PERL5DIR}/PVE/
>>   	install -d ${PERL5DIR}/PVE/VZDump
>>   	install -m 0644 PVE/VZDump/Plugin.pm ${PERL5DIR}/PVE/VZDump/
>>   	install -m 0644 PVE/VZDump/Common.pm ${PERL5DIR}/PVE/VZDump/
>> diff --git a/debian/control b/debian/control
>> index 4c246d0..73c28bd 100644
>> --- a/debian/control
>> +++ b/debian/control
>> @@ -16,6 +16,7 @@ Depends: libpve-cluster-perl,
>>            libpve-common-perl (>= 4.0-89),
>>            libpve-storage-perl (>= 7.0-14),
>>            pve-cluster,
>> +         proxmox-websocket-tunnel,
>>            ${misc:Depends},
>>            ${perl:Depends},
>>   Breaks: libpve-common-perl (<< 4.0-89),
>> diff --git a/src/PVE/Tunnel.pm b/src/PVE/Tunnel.pm
>> new file mode 100644
>> index 0000000..bbd1169
>> --- /dev/null
>> +++ b/src/PVE/Tunnel.pm
>> @@ -0,0 +1,356 @@
>> +package PVE::Tunnel;
>> +
>> +use strict;
>> +use warnings;
>> +
>> +use IO::Pipe;
>> +use IPC::Open2;
>> +use JSON qw(encode_json decode_json);
>> +use POSIX qw( WNOHANG );
>> +use Storable qw(dclone);
>> +use URI::Escape;
>> +
>> +use PVE::APIClient::LWP;
>> +use PVE::Tools;
>> +
>> +my $finish_command_pipe = sub {
>> +    my ($cmdpipe, $timeout) = @_;
>> +
>> +    my $cpid = $cmdpipe->{pid};
>> +    return if !defined($cpid);
>> +
>> +    my $writer = $cmdpipe->{writer};
>> +    my $reader = $cmdpipe->{reader};
>> +
>> +    $writer->close();
>> +    $reader->close();
>> +
>> +    my $collect_child_process = sub {
>> +	my $res = waitpid($cpid, WNOHANG);
>> +	if (defined($res) && ($res == $cpid)) {
>> +	    delete $cmdpipe->{cpid};
>> +	    return 1;
>> +	} else {
>> +	    return 0;
>> +	}
>> +     };
> 
> style nit: white-space error
> 
>> +
>> +    if ($timeout) {
>> +	for (my $i = 0; $i < $timeout; $i++) {
>> +	    return if &$collect_child_process();
>> +	    sleep(1);
>> +	}
>> +    }
>> +
>> +    $cmdpipe->{log}->("tunnel still running - terminating now with SIGTERM\n");
>> +    kill(15, $cpid);
>> +
>> +    # wait again
>> +    for (my $i = 0; $i < 10; $i++) {
>> +	return if &$collect_child_process();
>> +	sleep(1);
>> +    }
>> +
>> +    $cmdpipe->{log}->("tunnel still running - terminating now with SIGKILL\n");
>> +    kill 9, $cpid;
>> +    sleep 1;
>> +
>> +    $cmdpipe->{log}->("tunnel child process (PID $cpid) couldn't be collected\n")
>> +	if !&$collect_child_process();
>> +};
>> +
>> +sub read_tunnel {
>> +    my ($tunnel, $timeout) = @_;
>> +
>> +    $timeout = 60 if !defined($timeout);
>> +
>> +    my $reader = $tunnel->{reader};
>> +
>> +    my $output;
>> +    eval {
>> +	PVE::Tools::run_with_timeout($timeout, sub { $output = <$reader>; });
>> +    };
>> +    die "reading from tunnel failed: $@\n" if $@;
>> +
>> +    chomp $output if defined($output);
>> +
>> +    return $output;
>> +}
>> +
>> +sub write_tunnel {
>> +    my ($tunnel, $timeout, $command, $params) = @_;
>> +
>> +    $timeout = 60 if !defined($timeout);
>> +
>> +    my $writer = $tunnel->{writer};
>> +
>> +    if ($tunnel->{version} && $tunnel->{version} >= 2) {
>> +	my $object = defined($params) ? dclone($params) : {};
>> +	$object->{cmd} = $command;
>> +
>> +	$command = eval { JSON::encode_json($object) };
>> +
>> +	die "failed to encode command as JSON - $@\n"
>> +	    if $@;
>> +    }
>> +
>> +    eval {
>> +	PVE::Tools::run_with_timeout($timeout, sub {
>> +	    print $writer "$command\n";
>> +	    $writer->flush();
>> +	});
>> +    };
>> +    die "writing to tunnel failed: $@\n" if $@;
>> +
>> +    if ($tunnel->{version} && $tunnel->{version} >= 1) {
>> +	my $res = eval { read_tunnel($tunnel, $timeout); };
>> +	die "no reply to command '$command': $@\n" if $@;
>> +
>> +	if ($tunnel->{version} == 1) {
>> +	    if ($res eq 'OK') {
>> +		return;
>> +	    } else {
>> +		die "tunnel replied '$res' to command '$command'\n";
>> +	    }
>> +	} else {
>> +	    my $parsed = eval { JSON::decode_json($res) };
>> +	    die "failed to decode tunnel reply '$res' (command '$command') - $@\n"
>> +		if $@;
>> +
>> +	    if (!$parsed->{success}) {
>> +		if (defined($parsed->{msg})) {
>> +		    die "error - tunnel command '$command' failed - $parsed->{msg}\n";
>> +		} else {
>> +		    die "error - tunnel command '$command' failed\n";
>> +		}
>> +	    }
>> +
>> +	    return $parsed;
>> +	}
>> +    }
>> +}
>> +
>> +sub fork_ssh_tunnel {
>> +    my ($rem_ssh, $cmd, $ssh_forward_info, $log) = @_;
>> +
>> +    my @localtunnelinfo = ();
>> +    foreach my $addr (@$ssh_forward_info) {
>> +	push @localtunnelinfo, '-L', $addr;
>> +    }
>> +
>> +    my $full_cmd = [@$rem_ssh, '-o ExitOnForwardFailure=yes', @localtunnelinfo, @$cmd];
>> +
>> +    my $reader = IO::File->new();
>> +    my $writer = IO::File->new();
>> +
>> +    my $orig_pid = $$;
>> +
>> +    my $cpid;
>> +
>> +    eval { $cpid = open2($reader, $writer, @$full_cmd); };
>> +
>> +    my $err = $@;
>> +
>> +    # catch exec errors
>> +    if ($orig_pid != $$) {
>> +	$log->("can't fork command pipe, aborting\n");
>> +	POSIX::_exit(1);
>> +	kill('KILL', $$);
>> +    }
>> +
>> +    die $err if $err;
>> +
>> +    my $tunnel = {
>> +	writer => $writer,
>> +	reader => $reader,
>> +	pid => $cpid,
>> +	rem_ssh => $rem_ssh,
>> +	log => $log,
>> +    };
>> +
>> +    eval {
>> +	my $helo = read_tunnel($tunnel, 60);
>> +	die "no reply\n" if !$helo;
>> +	die "no quorum on target node\n" if $helo =~ m/^no quorum$/;
>> +	die "got strange reply from tunnel ('$helo')\n"
>> +	    if $helo !~ m/^tunnel online$/;
>> +    };
>> +    $err = $@;
>> +
>> +    eval {
>> +	my $ver = read_tunnel($tunnel, 10);
>> +	if ($ver =~ /^ver (\d+)$/) {
>> +	    $tunnel->{version} = $1;
>> +	    $log->('info', "ssh tunnel $ver\n");
> 
> Should pass only the message like the other calls to $log (unless the 
> function is intended to behave differently when multiple parameters are 
> used, but in qemu-server 06/10 that doesn't happen). What are the 
> reasons for not sticking to the two-parameter log interface?

no real reason other than 'let's make it more simple' (all the 'err' 
level does is prefix the lines with 'ERROR: '). but we can add it back 
in if we want?

replication uses a simple logfunc, so we need to adapt one to the other 
in any case:
- either migration only using 'info' (current)
- or replication wrapping its logfunc and throwing away the level/adding it 
  as prefix (alternative)

the alternative is less 'lossy', so maybe I'll switch to that..

> 
>> +	} else {
>> +	    $err = "received invalid tunnel version string '$ver'\n" if !$err;
>> +	}
>> +    };
>> +
>> +    if ($err) {
>> +	$finish_command_pipe->($tunnel);
>> +	die "can't open tunnel - $err";
>> +    }
>> +    return $tunnel;
>> +}
>> +
>> +sub forward_unix_socket {
>> +    my ($tunnel, $local, $remote) = @_;
>> +
>> +    my $params = dclone($tunnel->{params});
>> +    $params->{unix} = $local;
>> +    $params->{url} = $params->{url} ."socket=".uri_escape($remote)."&";
>> +    $params->{ticket} = { path => $remote };
>> +
>> +    my $cmd = encode_json({
>> +	control => JSON::true,
>> +	cmd => 'forward',
>> +	data => $params,
>> +    });
>> +
>> +    my $writer = $tunnel->{writer};
>> +    $tunnel->{forwarded}->{$local} = $remote;
>> +    eval {
>> +	unlink $local;
>> +	PVE::Tools::run_with_timeout(15, sub {
>> +	    print $writer "$cmd\n";
>> +	    $writer->flush();
>> +	});
>> +    };
>> +    die "failed to write forwarding command - $@\n" if $@;
>> +
>> +    read_tunnel($tunnel);
>> +}
>> +
>> +sub fork_websocket_tunnel {
>> +    my ($conn, $url, $req_params, $tunnel_params, $log) = @_;
>> +
>> +    if (my $apitoken = $conn->{apitoken}) {
>> +	$tunnel_params->{headers} = [["Authorization", "$apitoken"]];
>> +    } else {
>> +	die "can't connect to remote host without credentials\n";
>> +    }
>> +
>> +    if (my $fps = $conn->{cached_fingerprints}) {
>> +	$tunnel_params->{fingerprint} = (keys %$fps)[0];
>> +    }
>> +
>> +    my $api_client = PVE::APIClient::LWP->new(%$conn);
>> +
>> +    my $res = $api_client->post(
>> +	$url,
>> +	$req_params,
>> +    );
>> +
>> +    $log->("remote: started migration tunnel worker '$res->{upid}'");
> 
> Nit: still mentions migration, as is done...

thanks, removed

> 
>> +
>> +    my $websocket_url = $tunnel_params->{url};
>> +
>> +    $tunnel_params->{url} .= "?ticket=".uri_escape($res->{ticket});
>> +    $tunnel_params->{url} .= "&socket=".uri_escape($res->{socket});
>> +
>> +    my $reader = IO::Pipe->new();
>> +    my $writer = IO::Pipe->new();
>> +
>> +    my $cpid = fork();
>> +    if ($cpid) {
>> +	$writer->writer();
>> +	$reader->reader();
>> +	my $tunnel = { writer => $writer, reader => $reader, pid => $cpid };
>> +
>> +	eval {
>> +	    my $writer = $tunnel->{writer};
>> +	    my $cmd = encode_json({
>> +		control => JSON::true,
>> +		cmd => 'connect',
>> +		data => $tunnel_params,
>> +	    });
>> +
>> +	    eval {
>> +		PVE::Tools::run_with_timeout(15, sub {
>> +		    print {$writer} "$cmd\n";
>> +		    $writer->flush();
>> +		});
>> +	    };
>> +	    die "failed to write tunnel connect command - $@\n" if $@;
>> +	};
>> +	die "failed to connect via WS: $@\n" if $@;
>> +
>> +	my $err;
>> +        eval {
>> +	    my $writer = $tunnel->{writer};
>> +	    my $cmd = encode_json({
>> +		cmd => 'version',
>> +	    });
>> +
>> +	    eval {
>> +		PVE::Tools::run_with_timeout(15, sub {
>> +		    print {$writer} "$cmd\n";
>> +		    $writer->flush();
>> +		});
>> +	    };
>> +	    $err = "failed to write tunnel version command - $@\n" if $@;
>> +	    my $res = read_tunnel($tunnel, 10);
>> +	    $res = JSON::decode_json($res);
>> +	    my $version = $res->{api};
>> +
>> +	    if ($version =~ /^(\d+)$/) {
>> +		$tunnel->{version} = $1;
>> +		$tunnel->{age} = $res->{age};
>> +	    } else {
>> +		$err = "received invalid tunnel version string '$version'\n" if !$err;
>> +	    }
>> +	};
>> +	$err = $@ if !$err;
>> +
>> +	if ($err) {
>> +	    $finish_command_pipe->($tunnel);
> 
> Nit: Here, $tunnel->{log} is still undef, but finish_command_pipe might 
> try to use it.

ack, since we already have $log anyway we can just set it from the 
start, like in fork_ssh_tunnel.

> 
>> +	    die "can't open migration tunnel - $err";
> 
> ...here.

removed as well.

> 
>> +	}
>> +
>> +	$tunnel_params->{url} = "$websocket_url?"; # reset ticket and socket
>> +
>> +	$tunnel->{params} = $tunnel_params; # for forwarding
>> +	$tunnel->{log} = $log;
>> +
>> +	return $tunnel;
>> +    } else {
>> +	eval {
>> +	    $writer->reader();
>> +	    $reader->writer();
>> +	    PVE::Tools::run_command(
>> +		['proxmox-websocket-tunnel'],
>> +		input => "<&".fileno($writer),
>> +		output => ">&".fileno($reader),
>> +		errfunc => sub { my $line = shift; print "tunnel: $line\n"; },
>> +	    );
>> +	};
>> +	warn "CMD websocket tunnel died: $@\n" if $@;
>> +	exit 0;
>> +    }
>> +}
>> +
>> +sub finish_tunnel {
>> +    my ($tunnel, $cleanup) = @_;
>> +
>> +    $cleanup = $cleanup ? 1 : 0;
>> +
>> +    eval { write_tunnel($tunnel, 30, 'quit', { cleanup => $cleanup }); };
>> +    my $err = $@;
>> +
>> +    $finish_command_pipe->($tunnel, 30);
>> +
>> +    if (my $unix_sockets = $tunnel->{unix_sockets}) {
>> +	# ssh does not clean up on local host
>> +	my $cmd = ['rm', '-f', @$unix_sockets];
>> +	PVE::Tools::run_command($cmd);
>> +
>> +	# .. and just to be sure check on remote side
>> +	if ($tunnel->{rem_ssh}) {
>> +	    unshift @{$cmd}, @{$tunnel->{rem_ssh}};
>> +	    PVE::Tools::run_command($cmd);
>> +	}
>> +    }
>> +
>> +    die $err if $err;
>> +}
> 




More information about the pve-devel mailing list