[pve-devel] [PATCH storage v3 3/3] disks: allow add_storage for already configured local storage
Aaron Lauterer
a.lauterer at proxmox.com
Fri Aug 19 17:01:21 CEST 2022
One of the smaller annoyances, especially for less experienced users, is
the fact, that when creating a local storage (ZFS, LVM (thin), dir) in a
cluster, one can only leave the "Add Storage" option enabled the first
time.
On any following node, this option needed to be disabled and the new
node manually added to the list of nodes for that storage.
This patch changes the behavior. If a storage of the same name already
exists, it will verify that necessary parameters match the already
existing one.
Then, if the 'nodes' parameter is set, it adds the current node and
updates the storage config.
In case there is no nodes list, nothing else needs to be done, and the
GUI will stop showing the question mark for the configured, but until
then, not existing local storage.
Signed-off-by: Aaron Lauterer <a.lauterer at proxmox.com>
---
changes since
v2:
- move assert_sid_usable_on_node code into create_or_update
means we now pass a list of parameter names to verify and an optional
dry run parameter so we can run it early just for the checks
- reordered code, especially defining $storage_params early on
- improve detection if storage is already defined for node, by detecting
an empty node list as configured
v1:
- restructured the logic a bit. checks still need to be done the same,
but the create or update logic is in its own
API2::Storage::Config->create_or_update function which then either
calls the create or update API directly. This reduces a lot of code
repition.
- in Storage::assert_sid_usable_on_node additionally checks if the
parameter is configured in the storage and fails if not. We would have
gotten warnings about using and undef in a string concat due to how the
other error was presented.
PVE/API2/Disks/Directory.pm | 37 +++++++++++++++++++--------
PVE/API2/Disks/LVM.pm | 37 +++++++++++++++++++--------
PVE/API2/Disks/LVMThin.pm | 37 +++++++++++++++++++--------
PVE/API2/Disks/ZFS.pm | 36 ++++++++++++++++++--------
PVE/API2/Storage/Config.pm | 51 +++++++++++++++++++++++++++++++++++++
5 files changed, 155 insertions(+), 43 deletions(-)
diff --git a/PVE/API2/Disks/Directory.pm b/PVE/API2/Disks/Directory.pm
index e2272fb..4fdb068 100644
--- a/PVE/API2/Disks/Directory.pm
+++ b/PVE/API2/Disks/Directory.pm
@@ -209,7 +209,26 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $storage_params = {
+ type => 'dir',
+ storage => $name,
+ content => 'rootdir,images,iso,backup,vztmpl,snippets',
+ is_mountpoint => 1,
+ path => $path,
+ nodes => $node,
+ };
+ my $verify_params = [qw(path)];
+
+ if ($param->{add_storage}) {
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ 1,
+ );
+ }
my $mounted = PVE::Diskmanage::mounted_paths();
die "the path for '${name}' is already mounted: ${path} ($mounted->{$path})\n"
@@ -286,16 +305,12 @@ __PACKAGE__->register_method ({
run_command(['systemctl', 'start', $mountunitname]);
if ($param->{add_storage}) {
- my $storage_params = {
- type => 'dir',
- storage => $name,
- content => 'rootdir,images,iso,backup,vztmpl,snippets',
- is_mountpoint => 1,
- path => $path,
- nodes => $node,
- };
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ );
}
});
};
diff --git a/PVE/API2/Disks/LVM.pm b/PVE/API2/Disks/LVM.pm
index ef341d1..fe87545 100644
--- a/PVE/API2/Disks/LVM.pm
+++ b/PVE/API2/Disks/LVM.pm
@@ -150,7 +150,26 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $storage_params = {
+ type => 'lvm',
+ vgname => $name,
+ storage => $name,
+ content => 'rootdir,images',
+ shared => 0,
+ nodes => $node,
+ };
+ my $verify_params = [qw(vgname)];
+
+ if ($param->{add_storage}) {
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ 1,
+ );
+ }
my $worker = sub {
PVE::Diskmanage::locked_disk_action(sub {
@@ -168,16 +187,12 @@ __PACKAGE__->register_method ({
PVE::Diskmanage::udevadm_trigger($dev);
if ($param->{add_storage}) {
- my $storage_params = {
- type => 'lvm',
- vgname => $name,
- storage => $name,
- content => 'rootdir,images',
- shared => 0,
- nodes => $node,
- };
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ );
}
});
};
diff --git a/PVE/API2/Disks/LVMThin.pm b/PVE/API2/Disks/LVMThin.pm
index 9a25e7c..038310a 100644
--- a/PVE/API2/Disks/LVMThin.pm
+++ b/PVE/API2/Disks/LVMThin.pm
@@ -108,7 +108,26 @@ __PACKAGE__->register_method ({
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
+
+ my $storage_params = {
+ type => 'lvmthin',
+ vgname => $name,
+ thinpool => $name,
+ storage => $name,
+ content => 'rootdir,images',
+ nodes => $node,
+ };
+ my $verify_params = [qw(vgname thinpool)];
+
+ if ($param->{add_storage}) {
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ 1,
+ );
+ }
my $worker = sub {
PVE::Diskmanage::locked_disk_action(sub {
@@ -147,16 +166,12 @@ __PACKAGE__->register_method ({
PVE::Diskmanage::udevadm_trigger($dev);
if ($param->{add_storage}) {
- my $storage_params = {
- type => 'lvmthin',
- vgname => $name,
- thinpool => $name,
- storage => $name,
- content => 'rootdir,images',
- nodes => $node,
- };
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ );
}
});
};
diff --git a/PVE/API2/Disks/ZFS.pm b/PVE/API2/Disks/ZFS.pm
index 27873cc..dd59375 100644
--- a/PVE/API2/Disks/ZFS.pm
+++ b/PVE/API2/Disks/ZFS.pm
@@ -342,14 +342,33 @@ __PACKAGE__->register_method ({
my $name = $param->{name};
my $node = $param->{node};
my $devs = [PVE::Tools::split_list($param->{devices})];
+ my $node = $param->{node};
my $raidlevel = $param->{raidlevel};
my $compression = $param->{compression} // 'on';
for my $dev (@$devs) {
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
PVE::Diskmanage::assert_disk_unused($dev);
+
+ }
+ my $storage_params = {
+ type => 'zfspool',
+ pool => $name,
+ storage => $name,
+ content => 'rootdir,images',
+ nodes => $node,
+ };
+ my $verify_params = [qw(pool)];
+
+ if ($param->{add_storage}) {
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ 1,
+ );
}
- PVE::Storage::assert_sid_unused($name) if $param->{add_storage};
my $pools = get_pool_data();
die "pool '${name}' already exists on node '${node}'\n"
@@ -432,15 +451,12 @@ __PACKAGE__->register_method ({
PVE::Diskmanage::udevadm_trigger($devs->@*);
if ($param->{add_storage}) {
- my $storage_params = {
- type => 'zfspool',
- pool => $name,
- storage => $name,
- content => 'rootdir,images',
- nodes => $node,
- };
-
- PVE::API2::Storage::Config->create($storage_params);
+ PVE::API2::Storage::Config->create_or_update(
+ $name,
+ $node,
+ $storage_params,
+ $verify_params,
+ );
}
};
diff --git a/PVE/API2/Storage/Config.pm b/PVE/API2/Storage/Config.pm
index 6bd770e..821db21 100755
--- a/PVE/API2/Storage/Config.pm
+++ b/PVE/API2/Storage/Config.pm
@@ -65,6 +65,57 @@ sub cleanup_storages_for_node {
}
}
+# Decides if a storage needs to be created or updated. An update is needed, if
+# the storage has a node list configured, then the current node will be added.
+# The verify_params parameter is an array of parameter names that need to match
+# if there already is a storage config of the same name present. This is
+# mainly intended for local storage types as certain parameters need to be the
+# same. For exmaple 'pool' for ZFS, 'vg_name' for LVM, ...
+# Set the dryrun parameter, to only verify the parameters without updating or
+# creating the storage.
+sub create_or_update {
+ my ($self, $sid, $node, $storage_params, $verify_params, $dryrun) = @_;
+
+ my $cfg = PVE::Storage::config();
+ my $scfg = PVE::Storage::storage_config($cfg, $sid, 1);
+
+ if ($scfg) {
+ die "storage config for '${sid}' exists but no parameters to verify were provided\n"
+ if !$verify_params;
+
+ $node = PVE::INotify::nodename() if !$node || ($node eq 'localhost');
+ die "Storage ID '${sid}' already exists on node ${node}\n"
+ if !defined($scfg->{nodes}) || $scfg->{nodes}->{$node};
+
+ push @$verify_params, 'type';
+ for my $key (@$verify_params) {
+ if (!defined($scfg->{$key})) {
+ die "Option '${key}' is not configured for storage '$sid', "
+ ."expected it to be '$storage_params->{$key}'";
+ }
+ if ($storage_params->{$key} ne $scfg->{$key}) {
+ die "Option '${key}' ($storage_params->{$key}) does not match "
+ ."existing storage configuration '$scfg->{$key}'\n";
+ }
+ }
+ }
+
+ if (!$dryrun) {
+ if ($scfg) {
+ if ($scfg->{nodes}) {
+ $scfg->{nodes}->{$node} = 1;
+ $self->update({
+ nodes => join(',', sort keys $scfg->{nodes}->%*),
+ storage => $sid,
+ });
+ print "Added '${node}' to nodes for storage '${sid}'\n";
+ }
+ } else {
+ $self->create($storage_params);
+ }
+ }
+}
+
__PACKAGE__->register_method ({
name => 'index',
path => '',
--
2.30.2
More information about the pve-devel
mailing list