[pve-devel] [PATCH manager v2 1/6] replace systemd timer with pvescheduler daemon
Dominik Csapak
d.csapak at proxmox.com
Mon Nov 8 14:07:53 CET 2021
From: Thomas Lamprecht <t.lamprecht at proxmox.com>
The whole thing is already prepared for this, the systemd timer was
just a fixed periodic timer with a frequency of one minute. And we
just introduced it as the assumption was made that less memory usage
would be generated with this approach, AFAIK.
But logging 4+ lines just about that the timer was started, even if
it does nothing, and that 24/7 is not to cheap and a bit annoying.
So in a first step add a simple daemon, which forks of a child for
running jobs once a minute.
This could be made still a bit more intelligent, i.e., look if we
have jobs tor run before forking - as forking is not the cheapest
syscall. Further, we could adapt the sleep interval to the next time
we actually need to run a job (and sending a SIGUSR to the daemon if
a job interval changes such, that this interval got narrower)
We try to sync running on minute-change boundaries at start, this
emulates systemd.timer behaviour, we had until now. Also user can
configure jobs on minute precision, so they probably expect that
those also start really close to a minute change event.
Could be adapted to resync during running, to factor in time drift.
But, as long as enough cpu cycles are available we run in correct
monotonic intervalls, so this isn't a must, IMO.
Another improvement could be locking a bit more fine grained, i.e.
not on a per-all-local-job-runs basis, but per-job (per-guest?)
basis, which would improve temporary starvement of small
high-periodic jobs through big, less peridoci jobs.
We argued that it's the user fault if such situations arise, but they
can evolve over time without noticing, especially in compolexer
setups.
Signed-off-by: Thomas Lamprecht <t.lamprecht at proxmox.com>
Signed-off-by: Dominik Csapak <d.csapak at proxmox.com>
---
PVE/Service/Makefile | 2 +-
PVE/Service/pvescheduler.pm | 118 ++++++++++++++++++++++++++++++++++
bin/Makefile | 6 +-
bin/pvescheduler | 28 ++++++++
debian/postinst | 3 +-
services/Makefile | 3 +-
services/pvescheduler.service | 16 +++++
services/pvesr.service | 8 ---
services/pvesr.timer | 12 ----
9 files changed, 171 insertions(+), 25 deletions(-)
create mode 100755 PVE/Service/pvescheduler.pm
create mode 100755 bin/pvescheduler
create mode 100644 services/pvescheduler.service
delete mode 100644 services/pvesr.service
delete mode 100644 services/pvesr.timer
diff --git a/PVE/Service/Makefile b/PVE/Service/Makefile
index fc1cdb14..f66ceb81 100644
--- a/PVE/Service/Makefile
+++ b/PVE/Service/Makefile
@@ -1,6 +1,6 @@
include ../../defines.mk
-SOURCES=pvestatd.pm pveproxy.pm pvedaemon.pm spiceproxy.pm
+SOURCES=pvestatd.pm pveproxy.pm pvedaemon.pm spiceproxy.pm pvescheduler.pm
all:
diff --git a/PVE/Service/pvescheduler.pm b/PVE/Service/pvescheduler.pm
new file mode 100755
index 00000000..96d84e20
--- /dev/null
+++ b/PVE/Service/pvescheduler.pm
@@ -0,0 +1,118 @@
+package PVE::Service::pvescheduler;
+
+use strict;
+use warnings;
+
+use POSIX qw(WNOHANG);
+use PVE::SafeSyslog;
+use PVE::API2::Replication;
+
+use PVE::Daemon;
+use base qw(PVE::Daemon);
+
+my $cmdline = [$0, @ARGV];
+my %daemon_options = (stop_wait_time => 180, max_workers => 0);
+my $daemon = __PACKAGE__->new('pvescheduler', $cmdline, %daemon_options);
+
+my $finish_jobs = sub {
+ my ($self) = @_;
+ foreach my $cpid (keys %{$self->{jobs}}) {
+ my $waitpid = waitpid($cpid, WNOHANG);
+ if (defined($waitpid) && ($waitpid == $cpid)) {
+ delete ($self->{jobs}->{$cpid});
+ }
+ }
+};
+
+my $get_sleep_time = sub {
+ my ($calculate_offset) = @_;
+ my $time = 60;
+
+ if ($calculate_offset) {
+ # try to run near minute boundaries, makes more sense to the user as he
+ # configures jobs with minute precision
+ my ($current_seconds) = localtime;
+ $time = (60 - $current_seconds) if (60 - $current_seconds >= 5);
+ }
+
+ return $time;
+};
+
+sub run {
+ my ($self) = @_;
+
+ my $jobs= {};
+ $self->{jobs} = $jobs;
+
+ my $old_sig_chld = $SIG{CHLD};
+ local $SIG{CHLD} = sub {
+ local ($@, $!, $?); # do not overwrite error vars
+ $finish_jobs->($self);
+ $old_sig_chld->(@_) if $old_sig_chld;
+ };
+
+ my $run_jobs = sub {
+ my $child = fork();
+ if (!defined($child)) {
+ die "fork failed: $!\n";
+ } elsif ($child == 0) {
+ $self->after_fork_cleanup();
+ PVE::API2::Replication::run_jobs(undef, sub {}, 0, 1);
+ POSIX::_exit(0);
+ }
+
+ $jobs->{$child} = 1;
+ };
+
+ PVE::Jobs::setup_dirs();
+
+ for (my $count = 1000;;$count++) {
+ last if $self->{shutdown_request};
+
+ $run_jobs->();
+
+ my $sleep_time;
+ if ($count >= 1000) {
+ $sleep_time = $get_sleep_time->(1);
+ $count = 0;
+ } else {
+ $sleep_time = $get_sleep_time->(0);
+ }
+
+ my $slept = 0; # SIGCHLD interrupts sleep, so we need to keep track
+ while ($slept < $sleep_time) {
+ last if $self->{shutdown_request};
+ $slept += sleep($sleep_time - $slept);
+ }
+ }
+
+ # jobs have a lock timeout of 60s, wait a bit more for graceful termination
+ my $timeout = 0;
+ while (keys %$jobs > 0 && $timeout < 75) {
+ kill 'TERM', keys %$jobs;
+ $timeout += sleep(5);
+ }
+ # ensure the rest gets stopped
+ kill 'KILL', keys %$jobs if (keys %$jobs > 0);
+}
+
+sub shutdown {
+ my ($self) = @_;
+
+ syslog('info', 'got shutdown request, signal running jobs to stop');
+
+ kill 'TERM', keys %{$self->{jobs}};
+ $self->{shutdown_request} = 1;
+}
+
+$daemon->register_start_command();
+$daemon->register_stop_command();
+$daemon->register_status_command();
+
+our $cmddef = {
+ start => [ __PACKAGE__, 'start', []],
+ stop => [ __PACKAGE__, 'stop', []],
+ status => [ __PACKAGE__, 'status', [], undef, sub { print shift . "\n";} ],
+};
+
+1;
diff --git a/bin/Makefile b/bin/Makefile
index df30b27c..12cb4671 100644
--- a/bin/Makefile
+++ b/bin/Makefile
@@ -6,7 +6,7 @@ export NOVIEW=1
PERL_DOC_INC_DIRS=..
include /usr/share/pve-doc-generator/pve-doc-generator.mk
-SERVICES = pvestatd pveproxy pvedaemon spiceproxy
+SERVICES = pvestatd pveproxy pvedaemon spiceproxy pvescheduler
CLITOOLS = vzdump pvesubscription pveceph pveam pvesr pvenode pvesh pve6to7
SCRIPTS = \
@@ -52,6 +52,10 @@ pve6to7.1:
printf ".TH PVE6TO7 1\n.SH NAME\npve6to7 \- Proxmox VE upgrade checker script for 6.4 to 7.x\n" > $@
printf ".SH SYNOPSIS\npve6to7 [--full]\n" >> $@
+pvescheduler.8:
+ # FIXME: add to doc-generator
+ echo ".TH pvescheduler 8" > $@
+
pveversion.1.pod: pveversion
pveupgrade.1.pod: pveupgrade
pvereport.1.pod: pvereport
diff --git a/bin/pvescheduler b/bin/pvescheduler
new file mode 100755
index 00000000..5f2bde52
--- /dev/null
+++ b/bin/pvescheduler
@@ -0,0 +1,28 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+use PVE::Service::pvescheduler;
+
+use PVE::RPCEnvironment;
+use PVE::SafeSyslog;
+
+$SIG{'__WARN__'} = sub {
+ my $err = $@;
+ my $t = $_[0];
+ chomp $t;
+ print STDERR "$t\n";
+ syslog('warning', "%s", $t);
+ $@ = $err;
+};
+
+my $prepare = sub {
+ my $rpcenv = PVE::RPCEnvironment->init('priv');
+
+ $rpcenv->init_request();
+ $rpcenv->set_language($ENV{LANG});
+ $rpcenv->set_user('root at pam');
+};
+
+PVE::Service::pvescheduler->run_cli_handler(prepare => $prepare);
diff --git a/debian/postinst b/debian/postinst
index c4df64b5..7be1aa3d 100755
--- a/debian/postinst
+++ b/debian/postinst
@@ -79,6 +79,7 @@ case "$1" in
deb-systemd-invoke reload-or-try-restart pvestatd.service
deb-systemd-invoke reload-or-try-restart pveproxy.service
deb-systemd-invoke reload-or-try-restart spiceproxy.service
+ deb-systemd-invoke reload-or-try-restart pvescheduler.service
exit 0;;
@@ -102,7 +103,7 @@ case "$1" in
# same as dh_systemd_enable (code copied)
- UNITS="pvedaemon.service pveproxy.service spiceproxy.service pvestatd.service pvebanner.service pvesr.timer pve-daily-update.timer"
+ UNITS="pvedaemon.service pveproxy.service spiceproxy.service pvestatd.service pvebanner.service pvescheduler.service pve-daily-update.timer"
NO_RESTART_UNITS="pvenetcommit.service pve-guests.service"
for unit in ${UNITS} ${NO_RESTART_UNITS}; do
diff --git a/services/Makefile b/services/Makefile
index a3d04a2f..b46c7119 100644
--- a/services/Makefile
+++ b/services/Makefile
@@ -13,8 +13,7 @@ SERVICES= \
pve-storage.target \
pve-daily-update.service\
pve-daily-update.timer \
- pvesr.service \
- pvesr.timer
+ pvescheduler.service
.PHONY: install
install: ${SERVICES}
diff --git a/services/pvescheduler.service b/services/pvescheduler.service
new file mode 100644
index 00000000..11769e80
--- /dev/null
+++ b/services/pvescheduler.service
@@ -0,0 +1,16 @@
+[Unit]
+Description=Proxmox VE scheduler
+ConditionPathExists=/usr/bin/pvescheduler
+Wants=pve-cluster.service
+After=pve-cluster.service
+After=pve-storage.target
+
+[Service]
+ExecStart=/usr/bin/pvescheduler start
+ExecStop=/usr/bin/pvescheduler stop
+PIDFile=/var/run/pvescheduler.pid
+KillMode=process
+Type=forking
+
+[Install]
+WantedBy=multi-user.target
diff --git a/services/pvesr.service b/services/pvesr.service
deleted file mode 100644
index cbaed1ca..00000000
--- a/services/pvesr.service
+++ /dev/null
@@ -1,8 +0,0 @@
-[Unit]
-Description=Proxmox VE replication runner
-ConditionPathExists=/usr/bin/pvesr
-After=pve-cluster.service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/pvesr run --mail 1
diff --git a/services/pvesr.timer b/services/pvesr.timer
deleted file mode 100644
index 01d7b9c7..00000000
--- a/services/pvesr.timer
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Proxmox VE replication runner
-
-[Timer]
-AccuracySec=1
-RemainAfterElapse=no
-
-[Timer]
-OnCalendar=minutely
-
-[Install]
-WantedBy=timers.target
\ No newline at end of file
--
2.30.2
More information about the pve-devel
mailing list