[pve-devel] [PATCH RFC storage] rbd: fix #3286 add namespace support

aderumier at odiso.com aderumier at odiso.com
Wed Mar 3 11:10:25 CET 2021


Hi,
I wasn't aware about namespace support in ceph rbd, that's great :)


Is they any plan on the roadmap to generalize namespace, but at vm
level ?

I'm still looking for easy cross-cluster vm migration  with shared
storage.

I was thinking about something simple like
/etc/pve/<node>/qemu-server/<namespace>/<vmid.conf>

with new disk volumes including the namespace in their path like:
"scsi0: <storage>:<namespace>/vm-100-disk-0"




Le lundi 01 mars 2021 à 16:12 +0100, Aaron Lauterer a écrit :
> This RFC introduces support for Cephs RBD namespaces.
> 
> A new storage config parameter 'namespace' defines the namespace to
> be
> used for the RBD storage.
> 
> The namespace must already exist in the Ceph cluster as it is not
> automatically created.
> 
> The main intention is to use this for external Ceph clusters. With
> namespaces, each PVE cluster can get its own namespace and will not
> conflict with other PVE clusters.
> 
> Signed-off-by: Aaron Lauterer <a.lauterer at proxmox.com>
> ---
> 
> There are two ways to address namespaces. One is the '--namespace'
> parameter which is not supported by all rbd subcommands though!
> The other is the path style '<pool>/<namespace>/<image>' way.
> 
> Where possible I inject the '--namespace' parameter to the @$cmd but
> sometimes it is necessary to use the path style. There might be a
> nicer
> way to inject the namespace in these cases than what I have now.
> 
> It would be good to have some tests but this cannot be done at build
> time since it requires a ceph cluster with namespaces configured.
> Therefore having a test script that can be called manually in a
> fitting
> test environment is what I still have planned (thanks @Dominik for
> the
> hint).
> 
> Should I just place that in the 'test' directory of the repo without
> adding it to the Makefile?
> 
>  PVE/Storage/RBDPlugin.pm | 57 +++++++++++++++++++++++++++++++++-----
> --
>  1 file changed, 48 insertions(+), 9 deletions(-)
> 
> diff --git a/PVE/Storage/RBDPlugin.pm b/PVE/Storage/RBDPlugin.pm
> index fab6d57..8a6329f 100644
> --- a/PVE/Storage/RBDPlugin.pm
> +++ b/PVE/Storage/RBDPlugin.pm
> @@ -27,7 +27,9 @@ my $add_pool_to_disk = sub {
>  
>      my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
>  
> -    return "$pool/$disk";
> +    my $namespace = $scfg->{namespace} ? "/$scfg->{namespace}" : "";
> +
> +    return "$pool$namespace/$disk";
>  };
>  
>  my $build_cmd = sub {
> @@ -77,6 +79,8 @@ my $librados_connect = sub {
>  my $krbd_feature_update = sub {
>      my ($scfg, $storeid, $name) = @_;
>  
> +    my $namespace = $scfg->{namespace};
> +
>      my (@disable, @enable);
>      my ($kmajor, $kminor) = PVE::ProcFSTools::kernel_version();
>  
> @@ -102,6 +106,7 @@ my $krbd_feature_update = sub {
>      if ($to_disable) {
>         print "disable RBD image features this kernel RBD drivers is
> not compatible with: $to_disable\n";
>         my $cmd = $rbd_cmd->($scfg, $storeid, 'feature', 'disable',
> $name, $to_disable);
> +       push @$cmd, '--namespace', $namespace if $namespace;
>         run_rbd_command(
>             $cmd,
>             errmsg => "could not disable krbd-incompatible image
> features '$to_disable' for rbd image: $name",
> @@ -111,6 +116,7 @@ my $krbd_feature_update = sub {
>         print "enable RBD image features this kernel RBD drivers
> supports: $to_enable\n";
>         eval {
>             my $cmd = $rbd_cmd->($scfg, $storeid, 'feature',
> 'enable', $name, $to_enable);
> +           push @$cmd, '--namespace', $namespace if $namespace;
>             run_rbd_command(
>                 $cmd,
>                 errmsg => "could not enable krbd-compatible image
> features '$to_enable' for rbd image: $name",
> @@ -153,7 +159,10 @@ sub rbd_ls {
>      my ($scfg, $storeid) = @_;
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'ls', '-l', '--format',
> 'json');
> +    my $namespace = $scfg->{namespace};
> +    push @$cmd, '--namespace', $namespace if $namespace;
>      my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
> +    $pool .= "/${namespace}" if $namespace;
>  
>      my $raw = '';
>      my $parser = sub { $raw .= shift };
> @@ -199,6 +208,7 @@ sub rbd_ls_snap {
>      my ($scfg, $storeid, $name) = @_;
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'ls', $name, '--
> format', 'json');
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>  
>      my $raw = '';
>      run_rbd_command($cmd, errmsg => "rbd error", errfunc => sub {},
> outfunc => sub { $raw .= shift; });
> @@ -238,6 +248,7 @@ sub rbd_volume_info {
>      }
>  
>      $cmd = &$rbd_cmd($scfg, $storeid, @options);
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>  
>      my $raw = '';
>      my $parser = sub { $raw .= shift };
> @@ -281,6 +292,10 @@ sub properties {
>             description => "Pool.",
>             type => 'string',
>         },
> +       namespace=> {
> +           description => "RBD Namespace.",
> +           type => 'string',
> +       },
>         username => {
>             description => "RBD Id.",
>             type => 'string',
> @@ -302,6 +317,7 @@ sub options {
>         disable => { optional => 1 },
>         monhost => { optional => 1},
>         pool => { optional => 1 },
> +       namespace => { optional => 1 },
>         username => { optional => 1 },
>         content => { optional => 1 },
>         krbd => { optional => 1 },
> @@ -349,9 +365,10 @@ sub path {
>      $name .= '@'.$snapname if $snapname;
>  
>      my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
> -    return ("/dev/rbd/$pool/$name", $vmid, $vtype) if $scfg->{krbd};
> +    my $namespace = $scfg->{namespace} ? "/$scfg->{namespace}" : "";
> +    return ("/dev/rbd/${pool}${namespace}/${name}", $vmid, $vtype)
> if $scfg->{krbd};
>  
> -    my $path = "rbd:$pool/$name";
> +    my $path = "rbd:${pool}${namespace}/${name}";
>  
>      $path .= ":conf=$cmd_option->{ceph_conf}" if $cmd_option-
> >{ceph_conf};
>      if (defined($scfg->{monhost})) {
> @@ -370,6 +387,8 @@ sub find_free_diskname {
>      my ($class, $storeid, $scfg, $vmid, $fmt, $add_fmt_suffix) = @_;
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'ls');
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
> +
>      my $disk_list = [];
>  
>      my $parser = sub {
> @@ -423,6 +442,7 @@ sub create_base {
>  
>      if (!$protected){
>         my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'protect',
> $newname, '--snap', $snap);
> +       push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>         run_rbd_command($cmd, errmsg => "rbd protect $newname snap
> '$snap' error");
>      }
>  
> @@ -451,6 +471,7 @@ sub clone_image {
>  
>         if (!$protected) {
>             my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'protect',
> $volname, '--snap', $snapname);
> +           push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>             run_rbd_command($cmd, errmsg => "rbd protect $volname
> snap $snapname error");
>         }
>      }
> @@ -476,6 +497,7 @@ sub alloc_image {
>      $name = $class->find_free_diskname($storeid, $scfg, $vmid) if
> !$name;
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'create', '--image-format'
> , 2, '--size', int(($size+1023)/1024), $name);
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>      run_rbd_command($cmd, errmsg => "rbd create $name' error");
>  
>      return $name;
> @@ -487,10 +509,13 @@ sub free_image {
>      my ($vtype, $name, $vmid, undef, undef, undef) =
>         $class->parse_volname($volname);
>  
> +    my $namespace = $scfg->{namespace};
> +
>      my $snaps = rbd_ls_snap($scfg, $storeid, $name);
>      foreach my $snap (keys %$snaps) {
>         if ($snaps->{$snap}->{protected}) {
>             my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'unprotect',
> $name, '--snap', $snap);
> +           push @$cmd, '--namespace', $namespace if $namespace;
>             run_rbd_command($cmd, errmsg => "rbd unprotect $name snap
> '$snap' error");
>         }
>      }
> @@ -498,9 +523,11 @@ sub free_image {
>      $class->deactivate_volume($storeid, $scfg, $volname);
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'purge',  $name);
> +    push @$cmd, '--namespace', $namespace if $namespace;
>      run_rbd_command($cmd, errmsg => "rbd snap purge '$volname'
> error");
>  
>      $cmd = &$rbd_cmd($scfg, $storeid, 'rm', $name);
> +    push @$cmd, '--namespace', $namespace if $namespace;
>      run_rbd_command($cmd, errmsg => "rbd rm '$volname' error");
>  
>      return undef;
> @@ -511,6 +538,8 @@ sub list_images {
>  
>      $cache->{rbd} = rbd_ls($scfg, $storeid) if !$cache->{rbd};
>      my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
> +    my $namespace = $scfg->{namespace};
> +    $pool .= "/${namespace}" if $namespace;
>  
>      my $res = [];
>  
> @@ -575,9 +604,11 @@ sub deactivate_storage {
>  }
>  
>  my $get_kernel_device_name = sub {
> -    my ($pool, $name) = @_;
> +    my ($pool, $name, $namespace) = @_;
> +
> +    return "/dev/rbd/${pool}/${namespace}/${name}" if $namespace;
>  
> -    return "/dev/rbd/$pool/$name";
> +    return "/dev/rbd/${pool}/${name}";
>  };
>  
>  sub map_volume {
> @@ -585,12 +616,13 @@ sub map_volume {
>  
>      my ($vtype, $img_name, $vmid) = $class->parse_volname($volname);
>  
> -    my $name = $img_name;
> +    my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
> +    my $name = "${img_name}";
>      $name .= '@'.$snapname if $snapname;
>  
> -    my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
> +    my $namespace = $scfg->{namespace};
>  
> -    my $kerneldev = $get_kernel_device_name->($pool, $name);
> +    my $kerneldev = $get_kernel_device_name->($pool, $name,
> $namespace);
>  
>      return $kerneldev if -b $kerneldev; # already mapped
>  
> @@ -598,6 +630,7 @@ sub map_volume {
>      $krbd_feature_update->($scfg, $storeid, $img_name);
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'map', $name);
> +    push @$cmd, '--namespace', $namespace if $namespace;
>      run_rbd_command($cmd, errmsg => "can't map rbd volume $name");
>  
>      return $kerneldev;
> @@ -611,7 +644,7 @@ sub unmap_volume {
>  
>      my $pool =  $scfg->{pool} ? $scfg->{pool} : 'rbd';
>  
> -    my $kerneldev = $get_kernel_device_name->($pool, $name);
> +    my $kerneldev = $get_kernel_device_name->($pool, $name, $scfg-
> >{namespace});
>  
>      if (-b $kerneldev) {
>         my $cmd = &$rbd_cmd($scfg, $storeid, 'unmap', $kerneldev);
> @@ -653,6 +686,7 @@ sub volume_resize {
>      my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'resize', '--allow-shrink',
> '--size', ($size/1024/1024), $name);
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>      run_rbd_command($cmd, errmsg => "rbd resize '$volname' error");
>      return undef;
>  }
> @@ -663,6 +697,7 @@ sub volume_snapshot {
>      my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'create', '--snap',
> $snap, $name);
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>      run_rbd_command($cmd, errmsg => "rbd snapshot '$volname'
> error");
>      return undef;
>  }
> @@ -673,6 +708,7 @@ sub volume_snapshot_rollback {
>      my ($vtype, $name, $vmid) = $class->parse_volname($volname);
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'rollback', '--
> snap', $snap, $name);
> +    push @$cmd, '--namespace', $scfg->{namespace} if $scfg-
> >{namespace};
>      run_rbd_command($cmd, errmsg => "rbd snapshot $volname to
> '$snap' error");
>  }
>  
> @@ -684,14 +720,17 @@ sub volume_snapshot_delete {
>      $class->deactivate_volume($storeid, $scfg, $volname, $snap, {});
>  
>      my ($vtype, $name, $vmid) = $class->parse_volname($volname);
> +    my $namespace = $scfg->{namespace};
>  
>      my (undef, undef, undef, $protected) = rbd_volume_info($scfg,
> $storeid, $name, $snap);
>      if ($protected){
>         my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'unprotect',
> $name, '--snap', $snap);
> +       push @$cmd, '--namespace', $namespace if $namespace;
>         run_rbd_command($cmd, errmsg => "rbd unprotect $name snap
> '$snap' error");
>      }
>  
>      my $cmd = &$rbd_cmd($scfg, $storeid, 'snap', 'rm', '--snap',
> $snap, $name);
> +    push @$cmd, '--namespace', $namespace if $namespace;
>  
>      run_rbd_command($cmd, errmsg => "rbd snapshot '$volname'
> error");
>  




More information about the pve-devel mailing list