[pve-devel] [PATCH v2 storage 1/5] add BTRFS storage plugin
Wolfgang Bumiller
w.bumiller at proxmox.com
Tue Jun 22 14:18:20 CEST 2021
This is mostly the same as a directory storage, with 2 major
differences:
* 'subvol' volumes are actual btrfs subvolumes and therefore
allow snapshots
* 'raw' files are placed *into* a subvolume and therefore
also allow snapshots, the raw file for volume
`btrstore:100/vm-100-disk-1.raw` can be found under
`$path/images/100/vm-100-disk-1/disk.raw`
* in both cases, snapshots add an '@name' suffix to the
subvolume's directory name, so snapshot 'foo' of the above
would be found under
`$path/images/100/vm-100-disk-1 at foo/disk.raw`
or for format "subvol":
`$path/images/100/subvol-100-disk-1.subvol at foo`
Note that qgroups aren't included in btrfs-send streams,
therefore for now we will only be using *unsized* subvolumes
for containers and place a regular raw+ext4 file for sized
containers.
We could extend the import/export stream format to include
the information at the front (similar to how we do the
"tar+size" format, but we need to include the size of all
the contained snapshots as well, since they can technically
change). (But before enabling quotas we should do some
performance testing on bigger file systems with multiple
snapshots as there are quite a few reports of the fs slowing
down considerably in such scenarios).
Signed-off-by: Wolfgang Bumiller <w.bumiller at proxmox.com>
---
Changes to v1:
raw files are created manually with sysopen/truncate and
ioctls for setting the NOCOW bit have been added (this
are made optional later in the series)
PVE/Storage.pm | 2 +
PVE/Storage/BTRFSPlugin.pm | 634 +++++++++++++++++++++++++++++++++++++
PVE/Storage/Makefile | 1 +
3 files changed, 637 insertions(+)
create mode 100644 PVE/Storage/BTRFSPlugin.pm
diff --git a/PVE/Storage.pm b/PVE/Storage.pm
index ea887a4..e0d6f44 100755
--- a/PVE/Storage.pm
+++ b/PVE/Storage.pm
@@ -38,6 +38,7 @@ use PVE::Storage::GlusterfsPlugin;
use PVE::Storage::ZFSPoolPlugin;
use PVE::Storage::ZFSPlugin;
use PVE::Storage::PBSPlugin;
+use PVE::Storage::BTRFSPlugin;
# Storage API version. Increment it on changes in storage API interface.
use constant APIVER => 8;
@@ -60,6 +61,7 @@ PVE::Storage::GlusterfsPlugin->register();
PVE::Storage::ZFSPoolPlugin->register();
PVE::Storage::ZFSPlugin->register();
PVE::Storage::PBSPlugin->register();
+PVE::Storage::BTRFSPlugin->register();
# load third-party plugins
if ( -d '/usr/share/perl5/PVE/Storage/Custom' ) {
diff --git a/PVE/Storage/BTRFSPlugin.pm b/PVE/Storage/BTRFSPlugin.pm
new file mode 100644
index 0000000..370d848
--- /dev/null
+++ b/PVE/Storage/BTRFSPlugin.pm
@@ -0,0 +1,634 @@
+package PVE::Storage::BTRFSPlugin;
+
+use strict;
+use warnings;
+
+use base qw(PVE::Storage::Plugin);
+
+use Fcntl qw(S_ISDIR O_WRONLY O_CREAT O_EXCL);
+use File::Basename qw(dirname);
+use File::Path qw(mkpath);
+use IO::Dir;
+
+use PVE::Tools qw(run_command);
+
+use PVE::Storage::DirPlugin;
+
+use constant {
+ BTRFS_FIRST_FREE_OBJECTID => 256,
+ FS_NOCOW_FL => 0x00800000,
+ FS_IOC_GETFLAGS => 0x40086602,
+ FS_IOC_SETFLAGS => 0x80086601,
+};
+
+# Configuration (similar to DirPlugin)
+
+sub type {
+ return 'btrfs';
+}
+
+sub plugindata {
+ return {
+ content => [
+ {
+ images => 1,
+ rootdir => 1,
+ vztmpl => 1,
+ iso => 1,
+ backup => 1,
+ snippets => 1,
+ none => 1,
+ },
+ { images => 1, rootdir => 1 },
+ ],
+ format => [ { raw => 1, qcow2 => 1, vmdk => 1, subvol => 1 }, 'raw', ],
+ };
+}
+
+sub options {
+ return {
+ path => { fixed => 1 },
+ nodes => { optional => 1 },
+ shared => { optional => 1 },
+ disable => { optional => 1 },
+ maxfiles => { optional => 1 },
+ content => { optional => 1 },
+ format => { optional => 1 },
+ is_mountpoint => { optional => 1 },
+ # TODO: The new variant of mkdir with `populate` vs `create`...
+ };
+}
+
+# Storage implementation
+#
+# We use the same volume names are directory plugins, but map *raw* disk image file names into a
+# subdirectory.
+#
+# `vm-VMID-disk-ID.raw`
+# -> `images/VMID/vm-VMID-disk-ID/disk.raw`
+# where the `vm-VMID-disk-ID/` subdirectory is a btrfs subvolume
+
+# Reuse `DirPlugin`'s `check_config`. This simply checks for invalid paths.
+sub check_config {
+ my ($self, $sectionId, $config, $create, $skipSchemaCheck) = @_;
+ return PVE::Storage::DirPlugin::check_config($self, $sectionId, $config, $create, $skipSchemaCheck);
+}
+
+sub activate_storage {
+ my ($class, $storeid, $scfg, $cache) = @_;
+ return PVE::Storage::DirPlugin::activate_storage($class, $storeid, $scfg, $cache);
+}
+
+sub status {
+ my ($class, $storeid, $scfg, $cache) = @_;
+ return PVE::Storage::DirPlugin::status($class, $storeid, $scfg, $cache);
+}
+
+# TODO: sub get_volume_notes {}
+
+# TODO: sub update_volume_notes {}
+
+# croak would not include the caller from within this module
+sub __error {
+ my ($msg) = @_;
+ my (undef, $f, $n) = caller(1);
+ die "$msg at $f: $n\n";
+}
+
+# Given a name (eg. `vm-VMID-disk-ID.raw`), take the part up to the format suffix as the name of
+# the subdirectory (subvolume).
+sub raw_name_to_dir($) {
+ my ($raw) = @_;
+
+ # For the subvolume directory Strip the `.<format>` suffix:
+ if ($raw =~ /^(.*)\.raw$/) {
+ return $1;
+ }
+
+ __error "internal error: bad disk name: $raw";
+}
+
+sub raw_file_to_subvol($) {
+ my ($file) = @_;
+
+ if ($file =~ m|^(.*)/disk\.raw$|) {
+ return "$1";
+ }
+
+ __error "internal error: bad raw path: $file";
+}
+
+sub filesystem_path {
+ my ($class, $scfg, $volname, $snapname) = @_;
+
+ my ($vtype, $name, $vmid, undef, undef, $isBase, $format) =
+ $class->parse_volname($volname);
+
+ my $path = $class->get_subdir($scfg, $vtype);
+
+ $path .= "/$vmid" if $vtype eq 'images';
+
+ if ($format eq 'raw') {
+ my $dir = raw_name_to_dir($name);
+ if ($snapname) {
+ $dir .= "\@$snapname";
+ }
+ $path .= "/$dir/disk.raw";
+ } elsif ($format eq 'subvol') {
+ $path .= "/$name";
+ if ($snapname) {
+ $path .= "\@$snapname";
+ }
+ } else {
+ $path .= "/$name";
+ }
+
+ return wantarray ? ($path, $vmid, $vtype) : $path;
+}
+
+sub btrfs_cmd {
+ my ($class, $cmd, $outfunc) = @_;
+
+ my $msg = '';
+ my $func;
+ if (defined($outfunc)) {
+ $func = sub {
+ my $part = &$outfunc(@_);
+ $msg .= $part if defined($part);
+ };
+ } else {
+ $func = sub { $msg .= "$_[0]\n" };
+ }
+ run_command(['btrfs', '-q', @$cmd], errmsg => 'btrfs error', outfunc => $func);
+
+ return $msg;
+}
+
+sub btrfs_get_subvol_id {
+ my ($class, $path) = @_;
+ my $info = $class->btrfs_cmd(['subvolume', 'show', '--', $path]);
+ if ($info !~ /^\s*(?:Object|Subvolume) ID:\s*(\d+)$/m) {
+ die "failed to get btrfs subvolume ID from: $info\n";
+ }
+ return $1;
+}
+
+my sub chattr : prototype($$$) {
+ my ($fh, $mask, $xor) = @_;
+
+ my $flags = pack('L!', 0);
+ ioctl($fh, FS_IOC_GETFLAGS, $flags) or die "FS_IOC_GETFLAGS failed - $!\n";
+ $flags = pack('L!', (unpack('L!', $flags) & $mask) ^ $xor);
+ ioctl($fh, FS_IOC_SETFLAGS, $flags) or die "FS_IOC_SETFLAGS failed - $!\n";
+ return 1;
+}
+
+sub create_base {
+ my ($class, $storeid, $scfg, $volname) = @_;
+
+ my ($vtype, $name, $vmid, $basename, $basevmid, $isBase, $format) =
+ $class->parse_volname($volname);
+
+ my $newname = $name;
+ $newname =~ s/^vm-/base-/;
+
+ # If we're not working with a 'raw' file, which is the only thing that's "different" for btrfs,
+ # or a subvolume, we forward to the DirPlugin
+ if ($format ne 'raw' && $format ne 'subvol') {
+ return PVE::Storage::DirPlugin::create_base(@_);
+ }
+
+ my $path = $class->filesystem_path($scfg, $volname);
+ my $newvolname = $basename ? "$basevmid/$basename/$vmid/$newname" : "$vmid/$newname";
+ my $newpath = $class->filesystem_path($scfg, $newvolname);
+
+ my $subvol = $path;
+ my $newsubvol = $newpath;
+ if ($format eq 'raw') {
+ $subvol = raw_file_to_subvol($subvol);
+ $newsubvol = raw_file_to_subvol($newsubvol);
+ }
+
+ rename($subvol, $newsubvol)
+ || die "rename '$subvol' to '$newsubvol' failed - $!\n";
+ eval { $class->btrfs_cmd(['property', 'set', $newsubvol, 'ro', 'true']) };
+ warn $@ if $@;
+
+ return $newvolname;
+}
+
+sub clone_image {
+ my ($class, $scfg, $storeid, $volname, $vmid, $snap) = @_;
+
+ my ($vtype, $basename, $basevmid, undef, undef, $isBase, $format) =
+ $class->parse_volname($volname);
+
+ # If we're not working with a 'raw' file, which is the only thing that's "different" for btrfs,
+ # or a subvolume, we forward to the DirPlugin
+ if ($format ne 'raw' && $format ne 'subvol') {
+ return PVE::Storage::DirPlugin::clone_image(@_);
+ }
+
+ my $imagedir = $class->get_subdir($scfg, 'images');
+ $imagedir .= "/$vmid";
+ mkpath $imagedir;
+
+ my $path = $class->filesystem_path($scfg, $volname);
+ my $newname = $class->find_free_diskname($storeid, $scfg, $vmid, $format, 1);
+
+ # For btrfs subvolumes we don't actually need the "link":
+ #my $newvolname = "$basevmid/$basename/$vmid/$newname";
+ my $newvolname = "$vmid/$newname";
+ my $newpath = $class->filesystem_path($scfg, $newvolname);
+
+ my $subvol = $path;
+ my $newsubvol = $newpath;
+ if ($format eq 'raw') {
+ $subvol = raw_file_to_subvol($subvol);
+ $newsubvol = raw_file_to_subvol($newsubvol);
+ }
+
+ $class->btrfs_cmd(['subvolume', 'snapshot', '--', $subvol, $newsubvol]);
+
+ return $newvolname;
+}
+
+sub alloc_image {
+ my ($class, $storeid, $scfg, $vmid, $fmt, $name, $size) = @_;
+
+ if ($fmt ne 'raw' && $fmt ne 'subvol') {
+ return PVE::Storage::DirPlugin::alloc_image(@_);
+ }
+
+ # From Plugin.pm:
+
+ my $imagedir = $class->get_subdir($scfg, 'images') . "/$vmid";
+
+ mkpath $imagedir;
+
+ $name = $class->find_free_diskname($storeid, $scfg, $vmid, $fmt, 1) if !$name;
+
+ my (undef, $tmpfmt) = PVE::Storage::Plugin::parse_name_dir($name);
+
+ die "illegal name '$name' - wrong extension for format ('$tmpfmt != '$fmt')\n"
+ if $tmpfmt ne $fmt;
+
+ # End copy from Plugin.pm
+
+ my $subvol = "$imagedir/$name";
+ # .raw is not part of the directory name
+ $subvol =~ s/\.raw$//;
+
+ die "disk image '$subvol' already exists\n" if -e $subvol;
+
+ my $path;
+ if ($fmt eq 'raw') {
+ $path = "$subvol/disk.raw";
+ }
+
+ if ($fmt eq 'subvol' && !!$size) {
+ # NOTE: `btrfs send/recv` actually drops quota information so supporting subvolumes with
+ # quotas doesn't play nice with send/recv.
+ die "btrfs quotas are currently not supported, use an unsized subvolume or a raw file\n";
+ }
+
+ $class->btrfs_cmd(['subvolume', 'create', '--', $subvol]);
+
+ eval {
+ if ($fmt eq 'subvol') {
+ # Nothing to do for now...
+
+ # This is how we *would* do it:
+ # # Use the subvol's default 0/$id qgroup
+ # eval {
+ # # This call should happen at storage creation instead and therefore governed by a
+ # # configuration option!
+ # # $class->btrfs_cmd(['quota', 'enable', $subvol]);
+ # my $id = $class->btrfs_get_subvol_id($subvol);
+ # $class->btrfs_cmd(['qgroup', 'limit', "${size}k", "0/$id", $subvol]);
+ # };
+ } elsif ($fmt eq 'raw') {
+ sysopen my $fh, $path, O_WRONLY | O_CREAT | O_EXCL
+ or die "failed to create raw file '$path' - $!\n";
+ chattr($fh, ~FS_NOCOW_FL, FS_NOCOW_FL);
+ truncate($fh, $size * 1024)
+ or die "failed to set file size for '$path' - $!\n";
+ close($fh);
+ } else {
+ die "internal format error (format = $fmt)\n";
+ }
+ };
+
+ if (my $err = $@) {
+ eval { $class->btrfs_cmd(['subvolume', 'delete', '--', $subvol]); };
+ warn $@ if $@;
+ die $err;
+ }
+
+ return "$vmid/$name";
+}
+
+# Same as btrfsprogs does:
+my sub path_is_subvolume : prototype($) {
+ my ($path) = @_;
+ my @stat = stat($path)
+ or die "stat failed on '$path' - $!\n";
+ my ($ino, $mode) = @stat[1, 2];
+ return S_ISDIR($mode) && $ino == BTRFS_FIRST_FREE_OBJECTID;
+}
+
+my $BTRFS_VOL_REGEX = qr/((?:vm|base|subvol)-\d+-disk-\d+(?:\.subvol)?)(?:\@(\S+))$/;
+
+# Calls `$code->($volume, $name, $snapshot)` for each subvol in a directory matching our volume
+# regex.
+my sub foreach_subvol : prototype($$) {
+ my ($dir, $code) = @_;
+
+ dir_glob_foreach($dir, $BTRFS_VOL_REGEX, sub {
+ my ($volume, $name, $snapshot) = ($1, $2, $3);
+ return if !path_is_subvolume("$dir/$volume");
+ $code->($volume, $name, $snapshot);
+ })
+}
+
+sub free_image {
+ my ($class, $storeid, $scfg, $volname, $isBase, $_format) = @_;
+
+ my (undef, undef, $vmid, undef, undef, undef, $format) =
+ $class->parse_volname($volname);
+
+ if ($format ne 'subvol' && $format ne 'raw') {
+ return PVE::Storage::DirPlugin::free_image(@_);
+ }
+
+ my $path = $class->filesystem_path($scfg, $volname);
+
+ my $subvol = $path;
+ if ($format eq 'raw') {
+ $subvol = raw_file_to_subvol($path);
+ }
+
+ my $dir = dirname($subvol);
+ my @snapshot_vols;
+ foreach_subvol($dir, sub {
+ my ($volume, $name, $snapshot) = @_;
+ return if !defined $snapshot;
+ push @snapshot_vols, "$dir/$volume";
+ });
+
+ $class->btrfs_cmd(['subvolume', 'delete', '--', @snapshot_vols, $subvol]);
+ # try to cleanup directory to not clutter storage with empty $vmid dirs if
+ # all images from a guest got deleted
+ rmdir($dir);
+
+ return undef;
+}
+
+# Currently not used because quotas clash with send/recv.
+# my sub btrfs_subvol_quota {
+# my ($class, $path) = @_;
+# my $id = '0/' . $class->btrfs_get_subvol_id($path);
+# my $search = qr/^\Q$id\E\s+(\d)+\s+\d+\s+(\d+)\s*$/;
+# my ($used, $size);
+# $class->btrfs_cmd(['qgroup', 'show', '--raw', '-rf', '--', $path], sub {
+# return if defined($size);
+# if ($_[0] =~ $search) {
+# ($used, $size) = ($1, $2);
+# }
+# });
+# if (!defined($size)) {
+# # syslog should include more information:
+# syslog('err', "failed to get subvolume size for: $path (id $id)");
+# # UI should only see the last path component:
+# $path =~ s|^.*/||;
+# die "failed to get subvolume size for $path\n";
+# }
+# return wantarray ? ($used, $size) : $size;
+# }
+
+sub volume_size_info {
+ my ($class, $scfg, $storeid, $volname, $timeout) = @_;
+
+ my $path = $class->filesystem_path($scfg, $volname);
+
+ my $format = ($class->parse_volname($volname))[6];
+
+ if ($format eq 'subvol') {
+ my $ctime = (stat($path))[10];
+ my ($used, $size) = (0, 0);
+ #my ($used, $size) = btrfs_subvol_quota($class, $path); # uses wantarray
+ return wantarray ? ($size, 'subvol', $used, undef, $ctime) : 1;
+ }
+
+ return PVE::Storage::Plugin::file_size_info($path, $timeout);
+}
+
+sub volume_resize {
+ my ($class, $scfg, $storeid, $volname, $size, $running) = @_;
+
+ my $format = ($class->parse_volname($volname))[6];
+ if ($format eq 'subvol') {
+ my $path = $class->filesystem_path($scfg, $volname);
+ my $id = '0/' . $class->btrfs_get_subvol_id($path);
+ $class->btrfs_cmd(['qgroup', 'limit', '--', "${size}k", "0/$id", $path]);
+ return undef;
+ }
+
+ return PVE::Storage::Plugin::volume_resize(@_);
+}
+
+sub volume_snapshot {
+ my ($class, $scfg, $storeid, $volname, $snap) = @_;
+
+ my ($name, $vmid, $format) = ($class->parse_volname($volname))[1,2,6];
+ if ($format ne 'subvol' && $format ne 'raw') {
+ return PVE::Storage::Plugin::volume_snapshot(@_);
+ }
+
+ my $path = $class->filesystem_path($scfg, $volname);
+ my $snap_path = $class->filesystem_path($scfg, $volname, $snap);
+
+ if ($format eq 'raw') {
+ $path = raw_file_to_subvol($path);
+ $snap_path = raw_file_to_subvol($snap_path);
+ }
+
+ my $snapshot_dir = $class->get_subdir($scfg, 'images') . "/$vmid";
+ mkpath $snapshot_dir;
+
+ $class->btrfs_cmd(['subvolume', 'snapshot', '-r', '--', $path, $snap_path]);
+ return undef;
+}
+
+sub volume_rollback_is_possible {
+ my ($class, $scfg, $storeid, $volname, $snap) = @_;
+
+ return 1;
+}
+
+sub volume_snapshot_rollback {
+ my ($class, $scfg, $storeid, $volname, $snap) = @_;
+
+ my ($name, $format) = ($class->parse_volname($volname))[1,6];
+
+ if ($format ne 'subvol' && $format ne 'raw') {
+ return PVE::Storage::Plugin::volume_snapshot_rollback(@_);
+ }
+
+ my $path = $class->filesystem_path($scfg, $volname);
+ my $snap_path = $class->filesystem_path($scfg, $volname, $snap);
+
+ if ($format eq 'raw') {
+ $path = raw_file_to_subvol($path);
+ $snap_path = raw_file_to_subvol($snap_path);
+ }
+
+ # Simple version would be:
+ # rename old to temp
+ # create new
+ # on error rename temp back
+ # But for atomicity in case the rename after create-failure *also* fails, we create the new
+ # subvol first, then use RENAME_EXCHANGE,
+ my $tmp_path = "$path.tmp.$$";
+ $class->btrfs_cmd(['subvolume', 'snapshot', '--', $snap_path, $tmp_path]);
+ # The paths are absolute, so pass -1 as file descriptors.
+ my $ok = PVE::Tools::renameat2(-1, $tmp_path, -1, $path, &PVE::Tools::RENAME_EXCHANGE);
+
+ eval { $class->btrfs_cmd(['subvolume', 'delete', '--', $tmp_path]) };
+ warn "failed to remove '$tmp_path' subvolume: $@" if $@;
+
+ if (!$ok) {
+ die "failed to rotate '$tmp_path' into place at '$path' - $!\n";
+ }
+
+ return undef;
+}
+
+sub volume_snapshot_delete {
+ my ($class, $scfg, $storeid, $volname, $snap, $running) = @_;
+
+ my ($name, $vmid, $format) = ($class->parse_volname($volname))[1,2,6];
+
+ if ($format ne 'subvol' && $format ne 'raw') {
+ return PVE::Storage::Plugin::volume_snapshot_delete(@_);
+ }
+
+ my $path = $class->filesystem_path($scfg, $volname, $snap);
+
+ if ($format eq 'raw') {
+ $path = raw_file_to_subvol($path);
+ }
+
+ $class->btrfs_cmd(['subvolume', 'delete', '--', $path]);
+
+ return undef;
+}
+
+sub volume_has_feature {
+ my ($class, $scfg, $feature, $storeid, $volname, $snapname, $running) = @_;
+
+ my $features = {
+ snapshot => {
+ current => { qcow2 => 1, raw => 1, subvol => 1 },
+ snap => { qcow2 => 1, raw => 1, subvol => 1 }
+ },
+ clone => {
+ base => { qcow2 => 1, raw => 1, subvol => 1, vmdk => 1 },
+ current => { raw => 1 },
+ snap => { raw => 1 },
+ },
+ template => { current => { qcow2 => 1, raw => 1, vmdk => 1, subvol => 1 } },
+ copy => {
+ base => { qcow2 => 1, raw => 1, subvol => 1, vmdk => 1 },
+ current => { qcow2 => 1, raw => 1, subvol => 1, vmdk => 1 },
+ snap => { qcow2 => 1, raw => 1, subvol => 1 },
+ },
+ sparseinit => { base => {qcow2 => 1, raw => 1, vmdk => 1 },
+ current => {qcow2 => 1, raw => 1, vmdk => 1 } },
+ };
+
+ my ($vtype, $name, $vmid, $basename, $basevmid, $isBase, $format) =
+ $class->parse_volname($volname);
+
+ my $key = undef;
+ if ($snapname) {
+ $key = 'snap';
+ } else {
+ $key = $isBase ? 'base' : 'current';
+ }
+
+ return 1 if defined($features->{$feature}->{$key}->{$format});
+
+ return undef;
+}
+
+sub list_images {
+ my ($class, $storeid, $scfg, $vmid, $vollist, $cache) = @_;
+ my $imagedir = $class->get_subdir($scfg, 'images');
+
+ my $res = [];
+
+ # Copied from Plugin.pm, with file_size_info calls adapted:
+ foreach my $fn (<$imagedir/[0-9][0-9]*/*>) {
+ # different to in Plugin.pm the regex below also excludes '@' as valid file name
+ next if $fn !~ m@^(/.+/(\d+)/([^/\@.]+(?:\.(qcow2|vmdk|subvol))?))$@;
+ $fn = $1; # untaint
+
+ my $owner = $2;
+ my $name = $3;
+ my $ext = $4;
+
+ next if !$vollist && defined($vmid) && ($owner ne $vmid);
+
+ my $volid = "$storeid:$owner/$name";
+ my ($size, $format, $used, $parent, $ctime);
+
+ if (!$ext) { # raw
+ $volid .= '.raw';
+ ($size, $format, $used, $parent, $ctime) = PVE::Storage::Plugin::file_size_info("$fn/disk.raw");
+ } elsif ($ext eq 'subvol') {
+ ($used, $size) = (0, 0);
+ #($used, $size) = btrfs_subvol_quota($class, $fn);
+ $format = 'subvol';
+ } else {
+ ($size, $format, $used, $parent, $ctime) = PVE::Storage::Plugin::file_size_info($fn);
+ }
+ next if !($format && defined($size));
+
+ if ($vollist) {
+ next if ! grep { $_ eq $volid } @$vollist;
+ }
+
+ my $info = {
+ volid => $volid, format => $format,
+ size => $size, vmid => $owner, used => $used, parent => $parent,
+ };
+
+ $info->{ctime} = $ctime if $ctime;
+
+ push @$res, $info;
+ }
+
+ return $res;
+}
+
+# For now we don't implement `btrfs send/recv` as it needs some updates to our import/export API
+# first!
+
+sub volume_export_formats {
+ return PVE::Storage::DirPlugin::volume_export_formats(@_);
+}
+
+sub volume_export {
+ return PVE::Storage::DirPlugin::volume_export(@_);
+}
+
+sub volume_import_formats {
+ return PVE::Storage::DirPlugin::volume_import_formats(@_);
+}
+
+sub volume_import {
+ return PVE::Storage::DirPlugin::volume_import(@_);
+}
+
+1
diff --git a/PVE/Storage/Makefile b/PVE/Storage/Makefile
index 91b9238..857c485 100644
--- a/PVE/Storage/Makefile
+++ b/PVE/Storage/Makefile
@@ -12,6 +12,7 @@ SOURCES= \
ZFSPoolPlugin.pm \
ZFSPlugin.pm \
PBSPlugin.pm \
+ BTRFSPlugin.pm \
LvmThinPlugin.pm
.PHONY: install
--
2.30.2
More information about the pve-devel
mailing list