[pve-devel] [PATCH manager 1/2] postinst: set custom LVM settings

[Fabian Grünbichler]

On June 22, 2021 12:16 pm, Fabian Grünbichler wrote:
> now that we no longer ship our own LVM packages, set the relevant
> filtering options here if they are missing.
> 
> for an upgrade from PVE 6.x, the following two scenarios are likely:
> 
> A: user edited config provided by our old lvm2 package. it likely
> contains our (or a modified) global_filter, but the old scan_lvs
> default. in this case we ignore global_filter as long as it contains our
> 'don't scan zvols' entry, and set scan_lvs to false.
> 
> B: config provided by our old lvm2 package was taken over by default
> config from stock lvm2 package. scan_lvs defaults to false already, but
> global_filter is unset (scan everything), so we need to set our own
> global_filter excluding zvols.
> 
> other combinations should be handled fine as well.
> 
> for new installs (installer, install on top of Debian Bullseye) we are
> always in scenario B.
> 
> Signed-off-by: Fabian Grünbichler <f.gruenbichler at proxmox.com>
> ---
> 
> Notes:
>     once other difference between our old config and the stock one is that we had
>     'issue_discards' enabled. we could either put this in the release notes, or
>     also enable it here automatically - but it is less straight-forward since the
>     default is not "almost certainly wrong" like for the filtering options..
>     
>     we could drop the "check for marker" and just do this once on initial install
>     and upgrades from 6.x, but since the fallout from not having these in place can
>     be data corruption (activating multiple VGs with same name, using one from a
>     guest on the host!) I'd rather play it safe..
> 
>  debian/postinst | 55 +++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/debian/postinst b/debian/postinst
> index dcf77d24..241aac08 100755
> --- a/debian/postinst
> +++ b/debian/postinst
> @@ -8,6 +8,58 @@ set -e
>  # done its automatic conffile handling, and all the packages we depend
>  # of are already fully installed and configured.
>  
> +LVM_CONF_MARKER="# added by pve-manager to avoid scanning"
> +
> +set_lvm_conf() {
> +    OLD_VALUE="$(lvmconfig --typeconfig full devices/global_filter)"
> +    NEW_VALUE='global_filter=["r|/dev/zd.*|"]'
> +
> +    # only do these changes once
> +    # keep user changes afterwards provided marker is still there..
> +    if grep -qv "$LVM_CONF_MARKER" /etc/lvm/lvm.conf; then
> +	# check global_filter
> +	# keep previous setting from our custom packaging if it is still there
> +	if echo "$OLD_VALUE" | grep -qvF 'r|/dev/zd.*|'; then
> +	    SET_FILTER=1
> +	    BACKUP=1
> +	fi
> +	# should be the default since bullseye
> +	if lvmconfig --typeconfig full devices/scan_lvs | grep -qv 'scan_lvs=0'; then
> +	    SET_SCAN_LVS=1
> +	    BACKUP=1
> +	fi
> +	if test -n "$BACKUP"; then
> +	    echo "Backing up lvm.conf before setting pve-manager specific settings.."
> +	    cp -vb /etc/lvm/lvm.conf /etc/lvm/lvm.conf.bak
> +	fi
> +	if test -n "$SET_FILTER"; then
> +	    echo "Setting 'global_filter' in /etc/lvm/lvm.conf to prevent zvols from being scanned:"
> +	    echo "$OLD_VALUE => $NEW_VALUE"
> +	    # comment out existing setting
> +	    sed -i -e 's/^\([[:space:]]*global_filter[[:space:]]*=\)/#\1/' /etc/lvm/lvm.conf
> +	    # add new section with our setting
> +	    cat >> /etc/lvm/lvm.conf <<EOF
> +devices {
> +	 $LVM_CONF_MARKER ZFS zvols
> +	 global_filter=$NEW_VALUE

this should of course not have the 'global_filter=' prefix (moved that 
into NEW_VALUE before sending and forgot to update this line :-/), but 
rather be just

+	 $NEW_VALUE

> +}
> +EOF
> +	fi
> +	if test -n "$SET_SCAN_LVS"; then
> +	    echo "Adding scan_lvs=0 setting to /etc/lvm/lvm.conf to prevent LVs from being scanned."
> +	    # comment out existing setting
> +	    sed -i -e 's/^\([[:space:]]*scan_lvs[[:space:]]*=\)/#\1/' /etc/lvm/lvm.conf
> +	    # add new section with our setting
> +	    cat >> /etc/lvm/lvm.conf <<EOF
> +devices {
> +	 $LVM_CONF_MARKER LVM volumes
> +	 scan_lvs=0
> +}
> +EOF
> +	fi
> +    fi
> +}
> +
>  case "$1" in
>    triggered)
>      # We don't print a status message here, as dpkg already said
> @@ -86,6 +138,9 @@ case "$1" in
>  	    newaliases || true
>  	fi
>      fi
> +
> +    set_lvm_conf
> +
>      ;;
>  
>    abort-upgrade|abort-remove|abort-deconfigure)
> -- 
> 2.30.2
> 
> 
> 
> _______________________________________________
> pve-devel mailing list
> pve-devel at lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>