[pve-devel] [PATCH http-server 07/10] support streaming data form fh to client

Stefan Reiter s.reiter at proxmox.com
Wed Apr 21 13:15:36 CEST 2021


Use an explicit AnyEvent::Handle similar to websocket proxying.

Needs some special care to make sure we apply backpressure correctly to
avoid caching too much data. Note that because of AnyEvent restrictions,
specifying a "fh" to point to a file or a packet-based socket may result
in unwanted behaviour[0].

[0]: https://metacpan.org/pod/AnyEvent::Handle#DESCRIPTION

Signed-off-by: Stefan Reiter <s.reiter at proxmox.com>
---
 PVE/APIServer/AnyEvent.pm | 97 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 93 insertions(+), 4 deletions(-)

diff --git a/PVE/APIServer/AnyEvent.pm b/PVE/APIServer/AnyEvent.pm
index 60a2a1c..643ae88 100644
--- a/PVE/APIServer/AnyEvent.pm
+++ b/PVE/APIServer/AnyEvent.pm
@@ -189,7 +189,7 @@ sub finish_response {
 }
 
 sub response {
-    my ($self, $reqstate, $resp, $mtime, $nocomp, $delay) = @_;
+    my ($self, $reqstate, $resp, $mtime, $nocomp, $delay, $stream_fh) = @_;
 
     #print "$$: send response: " . Dumper($resp);
 
@@ -231,7 +231,7 @@ sub response {
     $resp->header('Server' => "pve-api-daemon/3.0");
 
     my $content_length;
-    if ($content) {
+    if ($content && !$stream_fh) {
 
 	$content_length = length($content);
 
@@ -258,11 +258,93 @@ sub response {
     #print "SEND(without content) $res\n" if $self->{debug};
 
     $res .= "\015\012";
-    $res .= $content if $content;
+    $res .= $content if $content && !$stream_fh;
 
     $self->log_request($reqstate, $reqstate->{request});
 
-    if ($delay && $delay > 0) {
+    if ($stream_fh) {
+	# write headers and preamble
+	$reqstate->{hdl}->push_write($res);
+
+	# then attach an AnyEvent::Handle to pass through the data
+	my $buf_size = 4*1024*1024;
+
+        my $on_read;
+	$on_read = sub {
+	    my ($hdl) = @_;
+	    my $reqhdl = $reqstate->{hdl};
+	    return if !$reqhdl;
+
+	    my $wbuf_len = length($reqhdl->{wbuf});
+	    my $rbuf_len = length($hdl->{rbuf});
+	    # TODO: Take into account $reqhdl->{wbuf_max} ? Right now
+	    # that's unbounded, so just assume $buf_size
+	    my $to_read = $buf_size - $wbuf_len;
+	    $to_read = $rbuf_len if $rbuf_len < $to_read;
+	    if ($to_read > 0) {
+		my $data = substr($hdl->{rbuf}, 0, $to_read, '');
+		$reqhdl->push_write($data);
+		$rbuf_len -= $to_read;
+	    } elsif ($hdl->{_eof}) {
+		# workaround: AnyEvent gives us a fake EPIPE if we don't consume
+		# any data when called at EOF, so unregister ourselves - data is
+		# flushed by on_eof anyway
+		# see: https://sources.debian.org/src/libanyevent-perl/7.170-2/lib/AnyEvent/Handle.pm/#L1329
+		$hdl->on_read();
+		return;
+	    }
+
+	    # apply backpressure so we don't accept any more data into
+	    # buffer if the client isn't downloading fast enough
+	    # note: read_size can double upon read, and we also need to
+	    # account for one more read after start_read, so *4
+	    if ($rbuf_len + $hdl->{read_size}*4 > $buf_size) {
+		# stop reading
+		$hdl->on_read();
+		my $prev_on_drain = $reqhdl->{on_drain};
+		$reqhdl->on_drain(sub {
+		    my ($wrhdl) = @_;
+		    # write buffer is empty, continue reading
+		    $hdl->on_read($on_read);
+		    if ($prev_on_drain) {
+			$wrhdl->on_drain($prev_on_drain);
+			$prev_on_drain->($wrhdl);
+		    }
+		});
+	    }
+	};
+
+	$reqstate->{proxyhdl} = AnyEvent::Handle->new(
+	    fh => $stream_fh,
+	    rbuf_max => $buf_size,
+	    timeout => 0,
+	    on_read => $on_read,
+	    on_eof => sub {
+		my ($hdl) = @_;
+		eval {
+		    if (my $reqhdl = $reqstate->{hdl}) {
+			$self->log_aborted_request($reqstate);
+			# write out any remaining data
+			$reqhdl->push_write($hdl->{rbuf}) if length($hdl->{rbuf}) > 0;
+			$hdl->{rbuf} = "";
+			$reqhdl->push_shutdown();
+			$self->finish_response($reqstate);
+		    }
+		};
+		if (my $err = $@) { syslog('err', "$err"); }
+		$on_read = undef;
+	    },
+	    on_error => sub {
+		my ($hdl, $fatal, $message) = @_;
+		eval {
+		    $self->log_aborted_request($reqstate, $message);
+		    $self->client_do_disconnect($reqstate);
+		};
+		if (my $err = $@) { syslog('err', "$err"); }
+		$on_read = undef;
+	    },
+	);
+    } elsif ($delay && $delay > 0) {
 	my $w; $w = AnyEvent->timer(after => $delay, cb => sub {
 	    undef $w; # delete reference
 	    $reqstate->{hdl}->push_write($res);
@@ -322,6 +404,13 @@ sub send_file_start {
 	    if (ref($download) eq 'HASH') {
 		$fh = $download->{fh};
 		$mime = $download->{'content-type'};
+
+		if ($download->{stream}) {
+		    my $header = HTTP::Headers->new(Content_Type => $mime);
+		    my $resp = HTTP::Response->new(200, "OK", $header);
+		    $self->response($reqstate, $resp, undef, 1, 0, $fh);
+		    return;
+		}
 	    } else {
 		my $filename = $download;
 		$fh = IO::File->new($filename, '<') ||
-- 
2.20.1






More information about the pve-devel mailing list