[pve-devel] [RFC qemu-server 1/2] Move importdisk from qm to API
Thomas Lamprecht
t.lamprecht at proxmox.com
Sat Jun 6 19:56:20 CEST 2020
On 5/22/20 12:08 PM, Dominic Jäger wrote:
> I'd appreciate a few hints for the importdisk GUI feature.
>
> Yes or no to automatically adding the drive as active (not unused)?
Well, IMO makes sense but I'd add an parameter for either a config ID (scsi0, sata2,
...) which it is added if free, and/or the bus (controller) where we then select the
next free slot if any.
>
> Signed-off-by: Dominic Jäger <d.jaeger at proxmox.com>
> ---
> PVE/API2/Qemu.pm | 87 +++++++++++++++++++++++++++++++++++-
> PVE/CLI/qm.pm | 57 +----------------------
> PVE/QemuServer/ImportDisk.pm | 2 +-
> 3 files changed, 87 insertions(+), 59 deletions(-)
>
> diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
> index fd51bf3..5e75605 100644
> --- a/PVE/API2/Qemu.pm
> +++ b/PVE/API2/Qemu.pm
> @@ -23,6 +23,7 @@ use PVE::QemuServer;
> use PVE::QemuServer::Drive;
> use PVE::QemuServer::CPUConfig;
> use PVE::QemuServer::Monitor qw(mon_cmd);
> +use PVE::QemuServer::ImportDisk qw(do_import);
> use PVE::QemuMigrate;
> use PVE::RPCEnvironment;
> use PVE::AccessControl;
> @@ -44,8 +45,6 @@ BEGIN {
> }
> }
>
> -use Data::Dumper; # fixme: remove
> -
> use base qw(PVE::RESTHandler);
>
> my $opt_force_description = "Force physical removal. Without this, we simple remove the disk from the config file and create an additional configuration entry called 'unused[n]', which contains the volume ID. Unlink of unused[n] always cause physical removal.";
> @@ -4203,4 +4202,88 @@ __PACKAGE__->register_method({
> return PVE::QemuServer::Cloudinit::dump_cloudinit_config($conf, $param->{vmid}, $param->{type});
> }});
>
> +__PACKAGE__->register_method ({
> + name => 'importdisk',
> + path => '{vmid}/importdisk',
> + method => 'POST',
> + protected => 1,
> + proxyto => 'node',
> + description => "Import an external disk image into a VM.
> + The image format has to be supported by qemu-img(1).",
please use concatenated multi line strings for description, i.e.:
description => "Import an external disk image into a VM. "
."The image format has to be supported by qemu-img(1).",
> + permissions => {
> + description => "You need 'VM.Config.Disk' permissions on /vms/{vmid},
> + and 'Datastore.AllocateSpace' permissions on the storage.",
> + check => [ 'and',
> + ['perm', '/vms/{vmid}', [ 'VM.Config.Disk' ]],
> + ['perm', '/storage/{storage}', [ 'Datastore.AllocateSpace' ]],
> + ],
> + },
> + parameters => {
> + additionalProperties => 0,
> + properties => PVE::QemuServer::json_config_properties ({
hmm, doesn't this puts _all_ of our VM config properties in here?? Most probably
do not make sense, only some disk/bus related ones, I'd say.
> + node => get_standard_option('pve-node'),
> + vmid => get_standard_option('pve-vmid', {completion => \&PVE::QemuServer::complete_vmid}),
> + source => {
> + description => 'Path to the disk image to import',
> + type => 'string',
> + optional => 0,
> + },
> + format => {
> + type => 'string',
> + description => 'Target format',
> + enum => [ 'raw', 'qcow2', 'vmdk' ],
> + optional => 1,
> + },
> + }),
> + },
> + returns => { type => 'string'},
> + code => sub {
> + my ($param) = @_;
> + print("start\n");
> +
> + my $rpcenv = PVE::RPCEnvironment::get();
> + my $authuser = $rpcenv->get_user();
> +
> + my $node = extract_param($param, 'node');
> + my $vmid = extract_param($param, 'vmid');
> + my $source = extract_param($param, 'source');
> + my $drive = extract_param($param, 'drive');
> + my $format = extract_param($param, 'format');
> + my $storecfg = PVE::Storage::config();
> +
> + # TODO nice error message if drive is not reachable
> + my $check_replication = sub { }; # TODO implement me, maybe?
> + my $driveX;
> + foreach my $opt (keys %$param) {
> + die ("Die because multiple drives\n") if defined($driveX);
nit: no parenthesis in die
> + if (PVE::QemuServer::is_valid_drivename($opt)) {
> + # cleanup drive path
> + my $drive = PVE::QemuServer::parse_drive($opt, $param->{$opt});
> + raise_param_exc({ $opt => "unable to parse drive options" }) if !$drive;
> + PVE::QemuServer::cleanup_drive_path($opt, $storecfg, $drive);
> + $check_replication->($drive); # TODO do I need this?
> + $param->{$opt} = PVE::QemuServer::print_drive($drive);
> + die "$source: non-existent or non-regular file\n" if (! -f $source);
> + $driveX = $drive;
> + }
> + }
> + $drive = $driveX;
> +
> + my $message = $drive ? "to drive $drive->{'file'} on" : 'as unused drive to';
> + print "Importing disk '$source' " . $message . " VM $vmid ...\n";
FYI: double quoted strings allow $variable interpolation, so you do not need to
concat this extra.
> + my $worker = sub {
> + eval {
> + my $dn = "$drive->{'interface'}$drive->{'index'}";
> + print("before import dn is $dn\n");
> + my ($storeid) = $drive->{'file'} =~ /^(.*):/;
> + print("storeid before import is $storeid\n");
> + my ($drive_id, $volid) = PVE::QemuServer::ImportDisk::do_import(
> + $source, $vmid, $storeid, { format => $format, drive_name => $dn });
> + print "Successfully imported disk '$source' as '$drive_id: $volid'\n";
> + };
> + die "Importing disk failed: $@\n" if $@;
> + };
> + return $rpcenv->fork_worker('importdisk', $vmid, $authuser, $worker);
> + }});
> +
> 1;
> diff --git a/PVE/CLI/qm.pm b/PVE/CLI/qm.pm
> index 282fa86..75e07fa 100755
> --- a/PVE/CLI/qm.pm
> +++ b/PVE/CLI/qm.pm
> @@ -445,61 +445,6 @@ __PACKAGE__->register_method ({
> return undef;
> }});
>
> -__PACKAGE__->register_method ({
> - name => 'importdisk',
> - path => 'importdisk',
> - method => 'POST',
> - description => "Import an external disk image as an unused disk in a VM. The
> - image format has to be supported by qemu-img(1).",
> - parameters => {
> - additionalProperties => 0,
> - properties => {
> - vmid => get_standard_option('pve-vmid', {completion => \&PVE::QemuServer::complete_vmid}),
> - source => {
> - description => 'Path to the disk image to import',
> - type => 'string',
> - optional => 0,
> - },
> - storage => get_standard_option('pve-storage-id', {
> - description => 'Target storage ID',
> - completion => \&PVE::QemuServer::complete_storage,
> - optional => 0,
> - }),
> - format => {
> - type => 'string',
> - description => 'Target format',
> - enum => [ 'raw', 'qcow2', 'vmdk' ],
> - optional => 1,
> - },
> - },
> - },
> - returns => { type => 'null'},
> - code => sub {
> - my ($param) = @_;
> -
> - my $vmid = extract_param($param, 'vmid');
> - my $source = extract_param($param, 'source');
> - my $storeid = extract_param($param, 'storage');
> - my $format = extract_param($param, 'format');
> -
> - my $vm_conf = PVE::QemuConfig->load_config($vmid);
> - PVE::QemuConfig->check_lock($vm_conf);
> - die "$source: non-existent or non-regular file\n" if (! -f $source);
> -
> - my $storecfg = PVE::Storage::config();
> - PVE::Storage::storage_check_enabled($storecfg, $storeid);
> -
> - my $target_storage_config = PVE::Storage::storage_config($storecfg, $storeid);
> - die "storage $storeid does not support vm images\n"
> - if !$target_storage_config->{content}->{images};
> -
> - print "importing disk '$source' to VM $vmid ...\n";
> - my ($drive_id, $volid) = PVE::QemuServer::ImportDisk::do_import($source, $vmid, $storeid, { format => $format });
> - print "Successfully imported disk as '$drive_id:$volid'\n";
> -
> - return undef;
> - }});
> -
> __PACKAGE__->register_method ({
> name => 'terminal',
> path => 'terminal',
> @@ -984,7 +929,7 @@ our $cmddef = {
>
> terminal => [ __PACKAGE__, 'terminal', ['vmid']],
>
> - importdisk => [ __PACKAGE__, 'importdisk', ['vmid', 'source', 'storage']],
> + importdisk => [ "PVE::API2::Qemu", 'importdisk', ['vmid', 'source', 'storage']],
>
> importovf => [ __PACKAGE__, 'importovf', ['vmid', 'manifest', 'storage']],
>
> diff --git a/PVE/QemuServer/ImportDisk.pm b/PVE/QemuServer/ImportDisk.pm
> index 51ad52e..d89cd4d 100755
> --- a/PVE/QemuServer/ImportDisk.pm
> +++ b/PVE/QemuServer/ImportDisk.pm
> @@ -38,7 +38,7 @@ sub do_import {
> }
>
> if ($drive_name) {
> - # should never happen as setting $drive_name is not exposed to public interface
> + # Exposed in importdisk API only
> die "cowardly refusing to overwrite existing entry: $drive_name\n" if $vm_conf->{$drive_name};
>
> my $modified = {}; # record what $option we modify
>
More information about the pve-devel
mailing list