[pve-devel] [PATCH v2 container 2/2] fix spelling: 'mountpoint' 'mount point'
Fabian Grünbichler
f.gruenbichler at proxmox.com
Fri Oct 14 12:51:04 CEST 2016
---
just rebased
src/PVE/API2/LXC.pm | 14 +++++++-------
src/PVE/CLI/pct.pm | 2 +-
src/PVE/LXC.pm | 2 +-
src/PVE/LXC/Config.pm | 14 +++++++-------
src/PVE/LXC/Migrate.pm | 4 ++--
src/PVE/VZDump/LXC.pm | 6 +++---
6 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/src/PVE/API2/LXC.pm b/src/PVE/API2/LXC.pm
index d0e558a..38b1feb 100644
--- a/src/PVE/API2/LXC.pm
+++ b/src/PVE/API2/LXC.pm
@@ -276,7 +276,7 @@ __PACKAGE__->register_method({
}
}
- die "mountpoints configured, but 'rootfs' not set - aborting\n"
+ die "mount points configured, but 'rootfs' not set - aborting\n"
if !$storage_only_mode && !defined($mp_param->{rootfs});
# check storage access, activate storage
@@ -358,8 +358,8 @@ __PACKAGE__->register_method({
if ($mountpoint->{backup}) {
warn "WARNING - unsupported configuration!\n";
- warn "backup was enabled for $type mountpoint $ms ('$mountpoint->{mp}')\n";
- warn "mountpoint configuration will be restored after archive extraction!\n";
+ warn "backup was enabled for $type mount point $ms ('$mountpoint->{mp}')\n";
+ warn "mount point configuration will be restored after archive extraction!\n";
warn "contained files will be restored to wrong directory!\n";
}
delete $mp_param->{$ms}; # actually delay bind/dev mps
@@ -1254,7 +1254,7 @@ __PACKAGE__->register_method({
if ($fullclone->{$opt}) {
die "fixme: full clone not implemented\n";
} else {
- print "create linked clone of mountpoint $opt ($volid)\n";
+ print "create linked clone of mount point $opt ($volid)\n";
my $newvolid = PVE::Storage::vdisk_clone($storecfg, $volid, $newid, $snapname);
push @$newvollist, $newvolid;
$mp->{volume} = $newvolid;
@@ -1300,7 +1300,7 @@ __PACKAGE__->register_method({
method => 'PUT',
protected => 1,
proxyto => 'node',
- description => "Resize a container mountpoint.",
+ description => "Resize a container mount point.",
permissions => {
check => ['perm', '/vms/{vmid}', ['VM.Config.Disk'], any => 1],
},
@@ -1373,7 +1373,7 @@ __PACKAGE__->register_method({
my (undef, undef, $owner, undef, undef, undef, $format) =
PVE::Storage::parse_volname($storage_cfg, $volid);
- die "can't resize mountpoint owned by another container ($owner)"
+ die "can't resize mount point owned by another container ($owner)"
if $vmid != $owner;
die "can't resize volume: $disk if snapshot exists\n"
@@ -1411,7 +1411,7 @@ __PACKAGE__->register_method({
$mp->{mp} = '/';
my $use_loopdev = (PVE::LXC::mountpoint_mount_path($mp, $storage_cfg))[1];
$path = PVE::LXC::query_loopdev($path) if $use_loopdev;
- die "internal error: CT running but mountpoint not attached to a loop device"
+ die "internal error: CT running but mount point not attached to a loop device"
if !$path;
PVE::Tools::run_command(['losetup', '--set-capacity', $path]) if $use_loopdev;
diff --git a/src/PVE/CLI/pct.pm b/src/PVE/CLI/pct.pm
index cf4a014..53a4ec2 100755
--- a/src/PVE/CLI/pct.pm
+++ b/src/PVE/CLI/pct.pm
@@ -227,7 +227,7 @@ __PACKAGE__->register_method ({
my $conf = PVE::LXC::Config->load_config($vmid);
my $storage_cfg = PVE::Storage::config();
- defined($conf->{$device}) || die "cannot run command on unexisting mountpoint $device\n";
+ defined($conf->{$device}) || die "cannot run command on non-existing mount point $device\n";
my $mount_point = $device eq 'rootfs' ? PVE::LXC::Config->parse_ct_rootfs($conf->{$device}) :
PVE::LXC::Config->parse_ct_mountpoint($conf->{$device});
diff --git a/src/PVE/LXC.pm b/src/PVE/LXC.pm
index 35ce796..bf16f8a 100644
--- a/src/PVE/LXC.pm
+++ b/src/PVE/LXC.pm
@@ -869,7 +869,7 @@ sub check_ct_modify_config_perm {
return if $delete;
my $data = $opt eq 'rootfs' ? PVE::LXC::Config->parse_ct_rootfs($newconf->{$opt})
: PVE::LXC::Config->parse_ct_mountpoint($newconf->{$opt});
- raise_perm_exc("mountpoint type $data->{type}") if $data->{type} ne 'volume';
+ raise_perm_exc("mount point type $data->{type}") if $data->{type} ne 'volume';
} elsif ($opt eq 'memory' || $opt eq 'swap') {
$rpcenv->check_vm_perm($authuser, $vmid, $pool, ['VM.Config.Memory']);
} elsif ($opt =~ m/^net\d+$/ || $opt eq 'nameserver' ||
diff --git a/src/PVE/LXC/Config.pm b/src/PVE/LXC/Config.pm
index e1b159c..dc26ee8 100644
--- a/src/PVE/LXC/Config.pm
+++ b/src/PVE/LXC/Config.pm
@@ -237,7 +237,7 @@ my $rootfs_desc = {
},
ro => {
type => 'boolean',
- description => 'Read-only mountpoint',
+ description => 'Read-only mount point',
optional => 1,
},
quota => {
@@ -432,7 +432,7 @@ my $valid_lxc_conf_keys = {
'lxc.rootfs' => 'lxc.rootfs is auto generated from rootfs',
'lxc.rootfs.mount' => 1,
'lxc.rootfs.options' => 'lxc.rootfs.options is not supported' .
- ', please use mountpoint options in the "rootfs" key',
+ ', please use mount point options in the "rootfs" key',
# lxc.cgroup.*
'lxc.cap.drop' => 1,
'lxc.cap.keep' => 1,
@@ -578,18 +578,18 @@ my $mp_desc = {
%$rootfs_desc,
backup => {
type => 'boolean',
- description => 'Whether to include the mountpoint in backups.',
- verbose_description => 'Whether to include the mountpoint in backups '.
- '(only used for volume mountpoints).',
+ description => 'Whether to include the mount point in backups.',
+ verbose_description => 'Whether to include the mount point in backups '.
+ '(only used for volume mount points).',
optional => 1,
},
mp => {
type => 'string',
format => 'pve-lxc-mp-string',
format_description => 'Path',
- description => 'Path to the mountpoint as seen from inside the container '.
+ description => 'Path to the mount point as seen from inside the container '.
'(must not contain symlinks).',
- verbose_description => "Path to the mountpoint as seen from inside the container.\n\n".
+ verbose_description => "Path to the mount point as seen from inside the container.\n\n".
"NOTE: Must not contain any symlinks for security reasons."
},
};
diff --git a/src/PVE/LXC/Migrate.pm b/src/PVE/LXC/Migrate.pm
index 10b2b69..73af6d4 100644
--- a/src/PVE/LXC/Migrate.pm
+++ b/src/PVE/LXC/Migrate.pm
@@ -62,7 +62,7 @@ sub prepare {
}
my ($storage, $volname) = PVE::Storage::parse_volume_id($volid, 1) if $volid;
- die "can't determine assigned storage for mountpoint '$ms'\n" if !$storage;
+ die "can't determine assigned storage for mount point '$ms'\n" if !$storage;
# check if storage is available on both nodes
my $scfg = PVE::Storage::storage_check_node($self->{storecfg}, $storage);
@@ -78,7 +78,7 @@ sub prepare {
# only activate if not shared
push @$need_activate, $volid;
- die "unable to migrate local mountpoint '$volid' while CT is running"
+ die "unable to migrate local mount point '$volid' while CT is running"
if $running;
}
diff --git a/src/PVE/VZDump/LXC.pm b/src/PVE/VZDump/LXC.pm
index 7062bf3..81f2588 100644
--- a/src/PVE/VZDump/LXC.pm
+++ b/src/PVE/VZDump/LXC.pm
@@ -87,12 +87,12 @@ sub vm_status {
my $check_mountpoint_empty = sub {
my ($mountpoint) = @_;
- die "mountpoint '$mountpoint' is not a directory\n" if ! -d $mountpoint;
+ die "mount point '$mountpoint' is not a directory\n" if ! -d $mountpoint;
PVE::Tools::dir_glob_foreach($mountpoint, qr/.*/, sub {
my $entry = shift;
return if $entry eq '.' || $entry eq '..';
- die "mountpoint '$mountpoint' not empty\n";
+ die "mount point '$mountpoint' not empty\n";
});
};
@@ -126,7 +126,7 @@ sub prepare {
if (!PVE::LXC::Config->mountpoint_backup_enabled($name, $data)) {
push @$exclude_dirs, $mount;
- $self->loginfo("excluding $type mountpoint $name ('$mount') from backup");
+ $self->loginfo("excluding $type mount point $name ('$mount') from backup");
return;
}
--
2.1.4
More information about the pve-devel
mailing list