[pve-devel] [PATCH 2/7] qemu_drive_mirror : handle multiple jobs
Alexandre Derumier
aderumier at odiso.com
Wed Dec 28 09:24:11 CET 2016
we can use multiple drive_mirror in parralel.
block-job-complete can be skipped, if we want to add more mirror job later.
also add support for nbd uri to qemu_drive_mirror
Signed-off-by: Alexandre Derumier <aderumier at odiso.com>
---
PVE/QemuServer.pm | 171 +++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 123 insertions(+), 48 deletions(-)
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index aeb710a..3b84964 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -5837,91 +5837,165 @@ sub qemu_img_format {
}
sub qemu_drive_mirror {
- my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized) = @_;
+ my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized, $jobs, $skipcomplete) = @_;
- my $storecfg = PVE::Storage::config();
- my ($dst_storeid, $dst_volname) = PVE::Storage::parse_volume_id($dst_volid);
+ $jobs = {} if !$jobs;
+
+ my $qemu_target;
+ my $format;
- my $dst_scfg = PVE::Storage::storage_config($storecfg, $dst_storeid);
+ if($dst_volid =~ /^nbd:(localhost|[\d\.]+|\[[\d\.:a-fA-F]+\]):(\d+)/) {
+ $qemu_target = $dst_volid;
+ my $server = $1;
+ my $port = $2;
+ $format = "nbd";
+ die "can't connect remote nbd server $server:$port" if !PVE::Network::tcp_ping($server, $port, 2);
+ } else {
+
+ my $storecfg = PVE::Storage::config();
+ my ($dst_storeid, $dst_volname) = PVE::Storage::parse_volume_id($dst_volid);
+
+ my $dst_scfg = PVE::Storage::storage_config($storecfg, $dst_storeid);
- my $format = qemu_img_format($dst_scfg, $dst_volname);
+ $format = qemu_img_format($dst_scfg, $dst_volname);
- my $dst_path = PVE::Storage::path($storecfg, $dst_volid);
+ my $dst_path = PVE::Storage::path($storecfg, $dst_volid);
- my $qemu_target = $is_zero_initialized ? "zeroinit:$dst_path" : $dst_path;
+ $qemu_target = $is_zero_initialized ? "zeroinit:$dst_path" : $dst_path;
+ }
my $opts = { timeout => 10, device => "drive-$drive", mode => "existing", sync => "full", target => $qemu_target };
$opts->{format} = $format if $format;
- print "drive mirror is starting (scanning bitmap) : this step can take some minutes/hours, depend of disk size and storage speed\n";
+ print "drive mirror is starting for drive-$drive\n";
- my $finish_job = sub {
- while (1) {
- my $stats = vm_mon_cmd($vmid, "query-block-jobs");
- my $stat = @$stats[0];
- last if !$stat;
- sleep 1;
- }
- };
+ eval { vm_mon_cmd($vmid, "drive-mirror", %$opts); }; #if a job already run for this device,it's throw an error
+ if (my $err = $@) {
+ eval { PVE::QemuServer::qemu_blockjobs_cancel($vmid, $jobs) };
+ die "mirroring error: $err";
+ }
+
+ $jobs->{"drive-$drive"} = {};
+
+ qemu_drive_mirror_monitor ($vmid, $vmiddst, $jobs, $skipcomplete);
+}
+
+sub qemu_drive_mirror_monitor {
+ my ($vmid, $vmiddst, $jobs, $skipcomplete) = @_;
eval {
- vm_mon_cmd($vmid, "drive-mirror", %$opts);
+
+ my $err_complete = 0;
+
while (1) {
+ die "storage migration timed out\n" if $err_complete > 300;
+
my $stats = vm_mon_cmd($vmid, "query-block-jobs");
- my $stat = @$stats[0];
- die "mirroring job seem to have die. Maybe do you have bad sectors?" if !$stat;
- die "error job is not mirroring" if $stat->{type} ne "mirror";
- my $busy = $stat->{busy};
- my $ready = $stat->{ready};
+ my $running_mirror_jobs = {};
+ foreach my $stat (@$stats) {
+ next if $stat->{type} ne 'mirror';
+ $running_mirror_jobs->{$stat->{device}} = $stat;
+ }
- if (my $total = $stat->{len}) {
- my $transferred = $stat->{offset} || 0;
- my $remaining = $total - $transferred;
- my $percent = sprintf "%.2f", ($transferred * 100 / $total);
+ my $readycounter = 0;
- print "transferred: $transferred bytes remaining: $remaining bytes total: $total bytes progression: $percent % busy: $busy ready: $ready \n";
- }
+ foreach my $job (keys %$jobs) {
+
+ if(defined($jobs->{$job}->{complete}) && !defined($running_mirror_jobs->{$job})) {
+ print "$job : finished\n";
+ delete $jobs->{$job};
+ next;
+ }
+
+ die "$job: mirroring has been cancelled. Maybe do you have bad sectors?" if !defined($running_mirror_jobs->{$job});
+ my $busy = $running_mirror_jobs->{$job}->{busy};
+ my $ready = $running_mirror_jobs->{$job}->{ready};
+ if (my $total = $running_mirror_jobs->{$job}->{len}) {
+ my $transferred = $running_mirror_jobs->{$job}->{offset} || 0;
+ my $remaining = $total - $transferred;
+ my $percent = sprintf "%.2f", ($transferred * 100 / $total);
- if ($stat->{ready} eq 'true') {
+ print "$job: transferred: $transferred bytes remaining: $remaining bytes total: $total bytes progression: $percent % busy: $busy ready: $ready \n";
+ }
- last if $vmiddst != $vmid;
+ $readycounter++ if $running_mirror_jobs->{$job}->{ready} eq 'true';
+ }
- # try to switch the disk if source and destination are on the same guest
- eval { vm_mon_cmd($vmid, "block-job-complete", device => "drive-$drive") };
- if (!$@) {
- &$finish_job();
+ last if scalar(keys %$jobs) == 0;
+
+ if ($readycounter == scalar(keys %$jobs)) {
+ print "all mirroring jobs are ready \n";
+ last if $skipcomplete; #do the complete later
+
+ if ($vmiddst && $vmiddst != $vmid) {
+ # if we clone a disk for a new target vm, we don't switch the disk
+ PVE::QemuServer::qemu_blockjobs_cancel($vmid, $jobs);
last;
+ } else {
+
+ foreach my $job (keys %$jobs) {
+ # try to switch the disk if source and destination are on the same guest
+ print "$job : Try to complete block job\n";
+
+ eval { vm_mon_cmd($vmid, "block-job-complete", device => $job) };
+ if ($@ =~ m/cannot be completed/) {
+ print "$job : block job cannot be complete. Try again \n";
+ $err_complete++;
+ }else {
+ print "$job : complete ok : flushing pending writes\n";
+ $jobs->{$job}->{complete} = 1;
+ }
+ }
}
- die $@ if $@ !~ m/cannot be completed/;
}
sleep 1;
}
-
-
};
my $err = $@;
- my $cancel_job = sub {
- vm_mon_cmd($vmid, "block-job-cancel", device => "drive-$drive");
- &$finish_job();
- };
-
if ($err) {
- eval { &$cancel_job(); };
+ eval { PVE::QemuServer::qemu_blockjobs_cancel($vmid, $jobs) };
die "mirroring error: $err";
}
- if ($vmiddst != $vmid) {
- # if we clone a disk for a new target vm, we don't switch the disk
- &$cancel_job(); # so we call block-job-cancel
+}
+
+sub qemu_blockjobs_cancel {
+ my ($vmid, $jobs) = @_;
+
+ foreach my $job (keys %$jobs) {
+ print "$job: try to cancel block job\n";
+ eval { vm_mon_cmd($vmid, "block-job-cancel", device => $job); };
+ $jobs->{$job}->{cancel} = 1;
+ }
+
+ while (1) {
+ my $stats = vm_mon_cmd($vmid, "query-block-jobs");
+
+ my $running_jobs = {};
+ foreach my $stat (@$stats) {
+ $running_jobs->{$stat->{device}} = $stat;
+ }
+
+ foreach my $job (keys %$jobs) {
+
+ if(defined($jobs->{$job}->{cancel}) && !defined($running_jobs->{$job})) {
+ print "$job : finished\n";
+ delete $jobs->{$job};
+ }
+ }
+
+ last if scalar(keys %$jobs) == 0;
+
+ sleep 1;
}
}
sub clone_disk {
my ($storecfg, $vmid, $running, $drivename, $drive, $snapname,
- $newvmid, $storage, $format, $full, $newvollist) = @_;
+ $newvmid, $storage, $format, $full, $newvollist, $jobs, $skipcomplete) = @_;
my $newvolid;
@@ -5930,6 +6004,7 @@ sub clone_disk {
$newvolid = PVE::Storage::vdisk_clone($storecfg, $drive->{file}, $newvmid, $snapname);
push @$newvollist, $newvolid;
} else {
+
my ($storeid, $volname) = PVE::Storage::parse_volume_id($drive->{file});
$storeid = $storage if $storage;
@@ -5962,7 +6037,7 @@ sub clone_disk {
if $drive->{iothread};
}
- qemu_drive_mirror($vmid, $drivename, $newvolid, $newvmid, $sparseinit);
+ qemu_drive_mirror($vmid, $drivename, $newvolid, $newvmid, $sparseinit, $jobs, $skipcomplete);
}
}
--
2.1.4
More information about the pve-devel
mailing list