[pve-devel] got stuck while setup new dev custer

[Stefan Priebe]

solved. Ugly switch had a special parameter for jumbo frames *gr*

Stefan

Am 23.03.2015 um 22:25 schrieb Stefan Priebe:
> Also tried:
> transport="udpu"
>
> But it doesn't change anything ;-( same problem. 2nd node does not join
> first node already running vms.
>
> Stefan
>
> Am 23.03.2015 um 20:01 schrieb Stefan Priebe:
>> Hi,
>>
>> i wanted to setup a new proxmox dev cluster of 3 nodes. I already had a
>> single pve machine i want to extend.
>>
>> So i used that one as a base.
>>
>> # pvecm create pve-dev
>>
>> Restarting pve cluster filesystem: pve-cluster[dcdb] notice: wrote new
>> cluster config '/etc/cluster/cluster.conf'
>> .
>> Starting cluster:
>>     Checking if cluster has been disabled at boot... [  OK  ]
>>     Checking Network Manager... [  OK  ]
>>     Global setup... [  OK  ]
>>     Loading kernel modules... [  OK  ]
>>     Mounting configfs... [  OK  ]
>>     Starting cman... [  OK  ]
>>     Waiting for quorum... [  OK  ]
>>     Starting fenced... [  OK  ]
>>     Starting dlm_controld... [  OK  ]
>>     Tuning DLM kernel config... [  OK  ]
>>     Unfencing self... [  OK  ]
>>
>> # pvecm status; pvecm nodes
>> Version: 6.2.0
>> Config Version: 1
>> Cluster Name:  pve-dev
>> Cluster Id: 51583
>> Cluster Member: Yes
>> Cluster Generation: 236
>> Membership state: Cluster-Member
>> Nodes: 1
>> Expected votes: 1
>> Total votes: 1
>> Node votes: 1
>> Quorum: 1
>> Active subsystems: 5
>> Flags:
>> Ports Bound: 0
>> Node name: node1
>> Node ID: 1
>> Multicast addresses: 239.192.201.73
>> Node addresses: 10.255.0.10
>> Node  Sts   Inc   Joined               Name
>>     1   M    236   2015-03-23 19:48:20  node1
>>
>> I then tried to add the 2nd node which just hangs:
>>
>> # pvecm add 10.255.0.10
>> copy corosync auth key
>> stopping pve-cluster service
>> Stopping pve cluster filesystem: pve-cluster.
>> backup old database
>> Starting pve cluster filesystem : pve-cluster.
>> Starting cluster:
>>     Checking if cluster has been disabled at boot... [  OK  ]
>>     Checking Network Manager... [  OK  ]
>>     Global setup... [  OK  ]
>>     Loading kernel modules... [  OK  ]
>>     Mounting configfs... [  OK  ]
>>     Starting cman... [  OK  ]
>>     Waiting for quorum... [  OK  ]
>>     Starting fenced... [  OK  ]
>>     Starting dlm_controld... [  OK  ]
>>     Tuning DLM kernel config... [  OK  ]
>>     Unfencing self... [  OK  ]
>> waiting for quorum...
>>
>> That one hangs at quorum.
>>
>> And the first one shows in log:
>> Mar 23 19:56:41 node1 pmxcfs[7740]: [status] notice: cpg_send_message
>> retried 100 times
>> Mar 23 19:56:41 node1 pmxcfs[7740]: [status] crit: cpg_send_message
>> failed: 6
>> Mar 23 19:56:42 node1 pmxcfs[7740]: [status] notice: cpg_send_message
>> retry 10
>> Mar 23 19:56:43 node1 pmxcfs[7740]: [status] notice: cpg_send_message
>> retry 20
>> ...
>>
>> I already checked omping which is fine.
>>
>> Whats wrong ;-(
>>
>> Greets,
>> Stefan