[pve-devel] Network configuration
Alexandre DERUMIER
aderumier at odiso.com
Wed Jul 22 10:26:49 CEST 2015
>>Hi all,
>>
>>I have installed a proxmox 4.0 to test openvswitch and IMHO the current
>>network GUI config is not suited for the task since every time you need
>>to create or delete an OVSint Port a reboot of the node is required. I
>>will therefore propose a change in the GUI which allows creating or
>>deleting of OVSint Port without the need for a reboot of the node.
>>Creating OVS Bonds and OVS Bridges IMHO should still require a reboot
>>of the node since changes here is something rarely done after initial
>>configuration and changing configuration of this will break basic
>>networking on the node.
>>
>>What is your opinion to this suggestion?
I Agree that GUI could be improve to change network online (if possible), both for ovs and linux bridge.
I have had a lot of requests about it during my trainings.
>>Second. If the above is implemented then in my opinion using
>>openvswitch is far superior to Linux Bridge/Bond and gives greater
>>flexibility while at the same time is more logical and simple in use in
>>which case I propose that the installer change default network
>>configuration to use openvswitch in proxmox 4.0.
>>What is your opinion to this suggestion?
I don't have any objection. (now that everybody will use a recent kernel, it should work fine).
Having bonding and vlan setup in installer could be a big improvement too !
----- Mail original -----
De: "datanom.net" <mir at datanom.net>
À: "pve-devel" <pve-devel at pve.proxmox.com>
Envoyé: Mercredi 22 Juillet 2015 01:25:14
Objet: [pve-devel] Network configuration
Hi all,
I have installed a proxmox 4.0 to test openvswitch and IMHO the current
network GUI config is not suited for the task since every time you need
to create or delete an OVSint Port a reboot of the node is required. I
will therefore propose a change in the GUI which allows creating or
deleting of OVSint Port without the need for a reboot of the node.
Creating OVS Bonds and OVS Bridges IMHO should still require a reboot
of the node since changes here is something rarely done after initial
configuration and changing configuration of this will break basic
networking on the node.
What is your opinion to this suggestion?
Second. If the above is implemented then in my opinion using
openvswitch is far superior to Linux Bridge/Bond and gives greater
flexibility while at the same time is more logical and simple in use in
which case I propose that the installer change default network
configuration to use openvswitch in proxmox 4.0.
What is your opinion to this suggestion?
--
Hilsen/Regards
Michael Rasmussen
Get my public GnuPG keys:
michael <at> rasmussen <dot> cc
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
mir <at> datanom <dot> net
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
mir <at> miras <dot> org
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
--------------------------------------------------------------
/usr/games/fortune -es says:
You are here:
***
***
*********
*******
*****
***
*
But you're not all there.
_______________________________________________
pve-devel mailing list
pve-devel at pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
More information about the pve-devel
mailing list