[pve-devel] GUI for DHCP

[Alexandre DERUMIER]

>>I also seems that IPv6 SLAAC solves the problem. With RDNSS you can get 
>>IPv6 address, gateway, and DNS server. And this does not have any problems 
>>with VLANs, because it is handled by the router. 
>>
>>I that correct? 

Yes, with ipv6 it should work fine without dhcp server.

(But I need it for ipv4 ;)

Another idead, I don't known if it's possible through qemu-agent to configure network ?


----- Mail original -----
De: "dietmar" <dietmar at proxmox.com>
À: "aderumier" <aderumier at odiso.com>
Cc: "datanom.net" <mir at datanom.net>, "pve-devel" <pve-devel at pve.proxmox.com>
Envoyé: Vendredi 13 Février 2015 09:44:35
Objet: Re: [pve-devel] GUI for DHCP

> Another more clean way, could be configure a dhcp relay on my routeur (which 
> are gateway for each vlan), 
> the forward dhcp requests to the proxmox hosts (define all proxmox hosts in 
> dhcp relay) 
> (In this case, all proxmox hosts need to be able to reply to all dhcp requests 
> of all vms) 
> 
> But the problem is that work only with 1cluster. 

I also seems that IPv6 SLAAC solves the problem. With RDNSS you can get 
IPv6 address, gateway, and DNS server. And this does not have any problems 
with VLANs, because it is handled by the router. 

I that correct?