[pve-devel] PVE 3.3 with problems of Kernel on Dell R720

[Cesar Peschiera]

Hi Gilberto

Many thanks for your reply

Unfortunately, with the message of apply "pci=nocrs", i did and after of the reboot, i get the same message of errors, so i know that this message is useless.

Can anybody help me? .... :-(

Best regards
Cesar

  ----- Original Message ----- 
  From: Gilberto Nunes 
  To: Cesar Peschiera 
  Cc: pve-devel at pve.proxmox.com 
  Sent: Saturday, October 25, 2014 9:53 PM
  Subject: Re: [pve-devel] PVE 3.3 with problems of Kernel on Dell R720


  Do you try pass this in kernel command line?? 

  pci=nocrs


  Try it and report



  2014-10-25 22:49 GMT-02:00 Cesar Peschiera <brain at click.com.py>:

    Hi

    I recently i installed PVE 3.3 (pve-kernel-2.6.32-33-pve: 2.6.32-138) in a Dell PowerEdge R720, after the install i get these errors in the kern.log file:

    Oct 25 17:01:59 kvmtest2 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Oct 25 17:01:59 kvmtest2 kernel: ipmi_si ipmi_si.0: Could not enable interrupts, failed set, using polled mode.
    Oct 25 17:01:59 kvmtest2 kernel: [Firmware Bug]: No valid trip found
    Oct 25 17:01:59 kvmtest2 kernel: ERST: Error Record Serialization Table (ERST) support is initialized.
    Oct 25 17:01:59 kvmtest2 kernel: ehci_hcd 0000:00:1a.0: debug port 2
    Oct 25 17:01:59 kvmtest2 kernel: ehci_hcd 0000:00:1d.0: debug port 2
    Oct 25 17:01:59 kvmtest2 kernel: ACPI Error: No handler for Region [SYSI] (ffff884067e2d420) [IPMI] (20090903/evregion-319)
    Oct 25 17:01:59 kvmtest2 kernel: ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
    Oct 25 17:01:59 kvmtest2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff884067e318f8), AE_NOT_EXIST
    Oct 25 17:01:59 kvmtest2 kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff884067e31998), AE_NOT_EXIST
    Oct 25 17:01:59 kvmtest2 kernel: All bugs added by David S. Miller <davem at redhat.com>


    - Firmwares of the Server are with the latest version.
    - If I enable a "blacklist power_meter" for the Kernel, i only can reduce all errors that say "ACPI Error" in the log file.

    Can anybody tell me what's going on?, and i should do for amend these errors?

    Best regards
    Cesar

    _______________________________________________
    pve-devel mailing list
    pve-devel at pve.proxmox.com
    http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel





  -- 

  --


  Gilberto Ferreira

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-devel/attachments/20141026/505ea878/attachment.htm>