[pve-devel] Error between PVE and LVM

Sat Nov 29 12:43:14 CET 2014

It'll be some time before such options can be added to the underlying
Proxmox API.

As to your comments about the resize not showing in the GUI even with qm
resize, that isn't quite true. Let's say you'd resize your LV normally
using `lvextend -L 100G`. I understand you'd prefer to use `100%` here, but
just bear with my example for the moment and pretend you'd use `100G`.
Changing that to `qm resize 100G` would not only resize the LV to 100 GB,
but also tell QEMU about the new size, which would in turn update the GUI.
That's because the qm command hooks into the same code the GUI uses to make
the changes it makes. So switching to `qm resize` will give you the VM/GUI
update at the cost of using % sizes (for now).

I still don't understand what benefit you'd get from increasing a single
VM's LV to the full VG size. No other LV would then be able to grow within
that VG. The only setup I can imagine that would avoid that problem is one
where each LV has a dedicated VG, which is to say, each VG only has a
single LV. That setup seems pretty inefficient to me, not really taking
advantage of LVM's design principles. But then, maybe I'm just missing
something.

On Sat, Nov 29, 2014, 00:37 Cesar Peschiera <brain at click.com.py> wrote:

>  Hi Daniel
>
> As the moderns Windows systems have the options of grow or shrink the
> partitions of his HDDs online, add such features to the PVE GUI will be
> very pleasant.
>
> And if is possible also add the a option of "resize to the max allowed"
> (the space available in his Volume group) , will be fantastic.
>
> Best regards
> Cesar
>
> ----- Original Message -----
> *From:* Daniel Hunsaker <danhunsaker at gmail.com>
> *To:* Alexandre DERUMIER <aderumier at odiso.com>
>
> *Cc:* pve-devel at pve.proxmox.com ; Cesar Peschiera <brain at click.com.py>
> *Sent:* Friday, November 28, 2014 3:55 AM
> *Subject:* Re: [pve-devel] Error between PVE and LVM
>
> The only difference between lvresize and lvextend is that lvresize
> supports shrinking the volume as well as growing it. My comments aren't
> questions so much as observations on a patch series I'm planning to create
> and submit that will allow shrinking volumes as well as expanding them.
> Probably roll the max-free option in there as well if it hasn't been added
> already by then, though I wonder at the utility of such an operation, since
> you could only use it on one lv per vg.
>
> On Thu, Nov 27, 2014, 23:49 Alexandre DERUMIER <aderumier at odiso.com>
> wrote:
>
>> Sorry, but I'm a bit lost in all the discussion.
>>
>> are your questions (both daniel and cesar) about shrinking ?  or extend ?
>>
>> (I don't have used lvm since a long time, don't known the difference
>> between lvresize and lvextend).
>>
>> @cesar, I don't understand why since the begin of this discus, you resize
>> manually the lvm disk.
>> (If the need is to do it command line, use qm resize, it'll extend the
>> lvm volume and tell to qemu the new size)
>>
>>
>>
>>
>> ----- Mail original -----
>>
>> De: "Daniel Hunsaker" <danhunsaker at gmail.com>
>> À: "Alexandre DERUMIER" <aderumier at odiso.com>, "Cesar Peschiera" <
>> brain at click.com.py>
>> Cc: pve-devel at pve.proxmox.com
>> Envoyé: Vendredi 28 Novembre 2014 06:32:15
>> Objet: Re: [pve-devel] Error between PVE and LVM
>>
>> Ah, good, it does support +size. In that case, simply swapping `lvresize`
>> into the code in place of `lvextend` (along with properly handling -size to
>> convert it to an absolute size for the command) would add shrinking support
>> to LVM storage. Just need to further explore the other storage plugins'
>> resize options to get shrinking for them as well. Makes the patches a bit
>> simpler.
>>
>> And yes, I always forget about `qm`. It's quite a bit simpler than
>> `pvesh`.
>>
>>
>> On Thu, Nov 27, 2014, 22:11 Alexandre DERUMIER < aderumier at odiso.com >
>> wrote:
>>
>>
>> >>But for this moment, i have two questions:
>> >>1) Do I have any simpler option to grow my LV(that is the HDD of the
>> VM) by
>> >>CLI?
>> >>2) If the answer is correct, what exactly should i execute?
>>
>> all the gui feature are available with cli, with "qm" command.
>>
>>
>>
>> #qm resize <vmid> <disk> <size>
>>
>> #man qm
>> qm resize <vmid> <disk> <size> [OPTIONS]
>>
>> Extend volume size.
>>
>> <vmid> integer (1 - N)
>>
>> The (unique) ID of the VM.
>>
>> <disk> (ide0 | ide1 | ide2 | ide3 | sata0 | sata1 | sata2 | sata3 |
>> sata4 | sata5 | scsi0 | scsi1 | scsi10 | scsi11 | scsi12 |
>> scsi13 | scsi2 | scsi3 | scsi4 | scsi5 | scsi6 | scsi7 | scsi8
>> | scsi9 | virtio0 | virtio1 | virtio10 | virtio11 | virtio12 |
>> virtio13 | virtio14 | virtio15 | virtio2 | virtio3 | virtio4 |
>> virtio5 | virtio6 | virtio7 | virtio8 | virtio9)
>>
>> The disk you want to resize.
>>
>> <size> \+?\d+(\.\d+)?[KMGT]?
>>
>> The new size. With the '+' sign the value is added to the
>> actual size of the volume and without it, the value is taken
>> as an absolute one. Shrinking disk size is not supported.
>>
>> -digest string
>>
>> Prevent changes if current configuration file has different
>> SHA1 digest. This can be used to prevent concurrent
>> modifications.
>>
>> -skiplock boolean
>>
>> Ignore locks - only root is allowed to use this option.
>>
>>
>> ----- Mail original -----
>>
>> De: "Cesar Peschiera" < brain at click.com.py >
>> À: "Daniel Hunsaker" < danhunsaker at gmail.com >, "Alexandre DERUMIER" <
>> aderumier at odiso.com >
>> Cc: pve-devel at pve.proxmox.com
>> Envoyé: Jeudi 27 Novembre 2014 21:01:28
>> Objet: Re: [pve-devel] Error between PVE and LVM
>>
>> Thanks Daniel, your words are encouraging for the future of PVE and for
>> me.
>>
>> But for this moment, i have two questions:
>> 1) Do I have any simpler option to grow my LV(that is the HDD of the VM)
>> by
>> CLI?
>> 2) If the answer is correct, what exactly should i execute?
>>
>> Best regards
>> Cesar
>>
>>
>> ----- Original Message -----
>> From: Daniel Hunsaker
>> To: Alexandre DERUMIER ; Cesar Peschiera
>> Cc: pve-devel at pve.proxmox.com
>> Sent: Thursday, November 27, 2014 3:37 PM
>> Subject: Re: [pve-devel] Error between PVE and LVM
>>
>>
>> If the GUI is resizing volumes, the API supports it, which means you
>> should
>> be able to use `pvesh` to do the operation in one command, instead of
>> using
>> the LVM commands and QEMU monitor directly. It does only support
>> specifying
>> the new size in bytes (which it seems to convert to MiB before actually
>> using), but it's still an option.
>>
>> As for the "max available" option, I'd personally find it more useful to
>> upgrade the API itself support the full range of `lvresize -L` values (it
>> currently uses `lvextend`, which means volumes cannot be reduced in size
>> - a
>> fairly safe approach in case the filesystem inside the VM hasn't been
>> reduced in advance, but also a bit restrictive), or at least the largest
>> subset we could also support for other storage plugins. I'll see about
>> implementing that if nobody else gets to it first.
>>
>>
>> On Thu, Nov 27, 2014, 09:15 Alexandre DERUMIER < aderumier at odiso.com >
>> wrote:
>>
>> >>This process is correct when you use the GUI, but when you have space
>> >>limited in the hard disk, and you want to change some partitions by CLI,
>> >>where finally will be working with the logical volumes, is when starting
>> >>the
>> >>problem due that the VM not see the change applied.
>>
>> ah ok.
>>
>> This is normal, you need to tell to qemu what is the new size.
>> (This is what we are doing in the code : vm_mon_cmd($vmid, "block_resize",
>> device => $deviceid, size => int($size)); )
>>
>> if you manually upgrade the disk size,
>> you need to use the monitor :
>>
>> #block_resize device size
>>
>> ex:
>>
>> #block_resize drive-virtio0 sizeinbytes
>>
>>
>>
>>
>>
>>
>>
>> ----- Mail original -----
>>
>> De: "Cesar Peschiera" < brain at click.com.py >
>> À: "Alexandre DERUMIER" < aderumier at odiso.com >
>> Cc: pve-devel at pve.proxmox.com
>> Envoyé: Jeudi 27 Novembre 2014 17:00:37
>> Objet: Re: [pve-devel] Error between PVE and LVM
>>
>> Hi Alexandre
>>
>> >This value correctly change after resize ?
>> If, before change, the logical volume had a smaller size.
>>
>> >We first extend the lvm disk, then we tell to qemu the new disk.
>> This process is correct when you use the GUI, but when you have space
>> limited in the hard disk, and you want to change some partitions by CLI,
>> where finally will be working with the logical volumes, is when starting
>> the
>> problem due that the VM not see the change applied.
>>
>> Please let me to do two suggestions:
>> - Maybe will be better than PVE GUI have a option that say: "resize to max
>> available", or something.
>> I guess that this first option would be very good due to that the user
>> will
>> not need calculate the space available considering the space used in the
>> metadata of LVM.
>>
>> - Moreover, in previous versions of PVE, while that I could see the
>> reflected changes into the VM, in the PVE GUI, when i see the size of his
>> hard disk, it shows his old size, then i had that remove the disk for re
>> add
>> it, only of this manner i could see his new size.
>>
>> >What kind of disk do you use in your guest ? virtio ? scsi ? ide ?
>> Virtio-block, moreover i have good references about virtio-scsi, do you
>> know
>> something about virtio-scsi for use it in windows systems?
>>
>> Many thanks again for your attention
>> Best regards
>> Cesar
>>
>>
>> ----- Original Message -----
>> From: "Alexandre DERUMIER" < aderumier at odiso.com >
>> To: "Cesar Peschiera" < brain at click.com.py >
>> Cc: < pve-devel at pve.proxmox.com >
>> Sent: Thursday, November 27, 2014 6:35 AM
>> Subject: Re: [pve-devel] Error between PVE and LVM
>>
>>
>> So,
>>
>> >>shell# lvs
>> >>LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
>> >>vm-100-disk-1 drbdvg2 -wi------ 30.00g
>>
>> This value correctly change after resize ?
>>
>>
>>
>> the resize code is here:
>>
>> we first extend the lvm disk, then we tell to qemu the new disk.
>>
>> (What kind of disk do you use in your guest ? virtio ? scsi ? ide ?)
>>
>>
>>
>>
>> /usr/share/perl5/PVE/ QemuServer.pm
>>
>>
>> sub qemu_block_resize {
>> my ($vmid, $deviceid, $storecfg, $volid, $size) = @_;
>>
>> my $running = check_running($vmid);
>>
>> return if !PVE::Storage::volume_resize($ storecfg, $volid, $size,
>> $running);
>>
>> return if !$running;
>>
>> vm_mon_cmd($vmid, "block_resize", device => $deviceid, size =>
>> int($size));
>>
>> }
>>
>>
>> /usr/share/perl5/PVE/Storage/ LVMPlugin.pm
>>
>> sub volume_resize {
>> my ($class, $scfg, $storeid, $volname, $size, $running) = @_;
>>
>> $size = ($size/1024/1024) . "M";
>>
>> my $path = $class->path($scfg, $volname);
>> my $cmd = ['/sbin/lvextend', '-L', $size, $path];
>> run_command($cmd, errmsg => "error resizing volume '$path'");
>>
>> return 1;
>> }
>>
>> ----- Mail original -----
>>
>> De: "Cesar Peschiera" < brain at click.com.py >
>> À: "Alexandre DERUMIER" < aderumier at odiso.com >
>> Cc: pve-devel at pve.proxmox.com
>> Envoyé: Jeudi 27 Novembre 2014 09:11:29
>> Objet: Re: [pve-devel] Error between PVE and LVM
>>
>> Hi Alexandre
>>
>> Thanks for your attention, here my answers and suggestions about of the
>> problem of your customer:
>>
>> >We have made no change since resize feature has been implemented.
>> >Can you describe a little bit more the problem on the guest side ?
>> >do you see disk size increase with parted/fdisk ?
>> I see the new size (vm-100-disk-1) of the logical volume by CLI, but it
>> isn't reflected into the VM.
>> In my case DRBD is in a upper layer to the LV, but the concept of LVM is
>> applicable for any Logical Volume in any kind of block device that Linux
>> can
>> recognise.
>> shell# lvs
>> LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
>> vm-100-disk-1 drbdvg2 -wi------ 30.00g
>> data pve -wi-ao--- 143.50g
>> root pve -wi-ao--- 20.00g
>> swap pve -wi-ao--- 20.00g
>>
>> >I have add a customer during a previous training session, which have
>> >problem with raw lvm disk in vms,
>> I don't have problems with the VMs (LVM or raw image file), only with the
>> LVM resize by CLI.
>>
>> >because of proxmox host scanning all lvm disks on the host side. (Don't
>> >remember if it's have impact on resize).
>> It don't have impact on resize, and it is necessary for that LVM can
>> manage
>> the changes online included (VM and host), that it is my case.
>> Moreover, for my DRBD resources, i use this filter on the lvm.conf file
>> for
>> avoid scanning all lvm disks:
>>
>> filter = [ "r|/dev/sdb1|", "r|/dev/sdc1|", "r|/dev/sdd1|", "r|/dev/sde1|",
>> "r|/dev/disk/|", "r|/dev/block/|", "a/.*/" ]
>> Where:
>> a=accept (include) , and
>> r=reject (exclude) the scans to speed startup.
>>
>> >We have need to add a filter in lvm.conf on the host, to exclude scan of
>> >vms lvm disk.
>> Sure, i use the CLI
>>
>> An additional note of IBM:
>> In the best practices, LVM as block device is the mode more fast for get
>> the
>> better performance in reads and writes of disks.
>>
>> Official Web page of IBM in "Best practice: Use block devices for VM
>> storage":
>> http://www-01.ibm.com/support/ knowledgecenter/linuxonibm/
>> liaat/liaatbpblock.htm
>>
>> And finally, my question:
>> Can be corrected my problem?
>>
>> Best regards
>> Cesar
>>
>> ----- Original Message -----
>> From: "Alexandre DERUMIER" < aderumier at odiso.com >
>> To: "Cesar Peschiera" < brain at click.com.py >
>> Cc: < pve-devel at pve.proxmox.com >
>> Sent: Thursday, November 27, 2014 3:47 AM
>> Subject: Re: [pve-devel] Error between PVE and LVM
>>
>>
>> Hi,
>>
>> >>In previous versions of PVE, this task was possible do it with much
>> >>easily.
>>
>> We have made no change since resize feature has been implemented.
>> Can you describe a little bit more the problem on the guest side ?
>> do you see disk size increase with parted/fdisk ?
>>
>> Do you use raw lvm disk in your vms ? or partitions on top of lvm ?
>> I have the LVM partition, and the image of the virtual disk isn't on a
>> file
>> system (as raw, qcow2, or any other kind of file format), so my image disk
>> is a LVM as block device.
>>
>> I have add a customer during a previous training session, which have
>> problem
>> with raw lvm disk in vms,
>>
>> because of proxmox host scanning all lvm disks on the host side. (Don't
>> remember if it's have impact on resize).
>>
>> We have need to add a filter in lvm.conf on the host, to exclude scan of
>> vms
>> lvm disk.
>>
>> ----- Mail original -----
>>
>> De: "Cesar Peschiera" < brain at click.com.py >
>> À: pve-devel at pve.proxmox.com
>> Envoyé: Jeudi 27 Novembre 2014 07:15:19
>> Objet: [pve-devel] Error between PVE and LVM
>>
>> Hi to the PVE team.
>>
>> I found a problem between PVE and LVM.
>>
>> Considering that if it is used LVM as block device for the virtual disks
>> of
>> the VMs, Linux give us a great comfort, but the problem is that if I in
>> "online mode" enlarge a Physical Volume and after enlarge a Logical Volume
>> by CLI, in PVE, the VM can not see the new free hard disk space without
>> partition.
>>
>> In previous versions of PVE, this task was possible do it with much
>> easily.
>>
>> Moreover, i think that this feature is very util, due to that in the
>> actual
>> condition, it force me to power off the VM and start it again, so that
>> being
>> a server (talking about of the VM) that is in a production environment,
>> only
>> can I do it outside of working hours.
>>
>> So i would like to ask if the PVE team have interest in correcting this
>> problem.
>>
>> Best regards
>> Cesar
>>
>> ______________________________ _________________
>> pve-devel mailing list
>> pve-devel at pve.proxmox.com
>> http://pve.proxmox.com/cgi- bin/mailman/listinfo/pve-devel
>> ______________________________ _________________
>> pve-devel mailing list
>> pve-devel at pve.proxmox.com
>> http://pve.proxmox.com/cgi- bin/mailman/listinfo/pve-devel
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-devel/attachments/20141129/bf78133e/attachment.htm>