[pve-devel] Quorum problems with NICs Intel of 10 Gb/s and VMsturns off

[Cesar Peschiera]

>can you post your /etc/network/interfaces of theses 10gb/s nodes ?

This is my configuration:
Note: The LAN use 192.100.100.0/24

#Network interfaces
auto lo
iface lo inet loopback

iface eth0  inet manual
iface eth1  inet manual
iface eth2  inet manual
iface eth3  inet manual
iface eth4  inet manual
iface eth5  inet manual
iface eth6  inet manual
iface eth7  inet manual
iface eth8  inet manual
iface eth9  inet manual
iface eth10 inet manual
iface eth11 inet manual

#PVE Cluster and VMs  (NICs are of 10 Gb/s):
auto bond0
iface bond0 inet manual
    slaves eth0 eth2
    bond_miimon 100
    bond_mode 802.3ad
    bond_xmit_hash_policy layer2

#PVE Cluster and VMs:
auto vmbr0
iface vmbr0 inet static
    address  192.100.100.51
    netmask  255.255.255.0
    gateway  192.100.100.4
    bridge_ports bond0
    bridge_stp off
    bridge_fd 0
    post-up echo 0 > 
/sys/devices/virtual/net/vmbr0/bridge/multicast_snooping
    post-up echo 1 > /sys/class/net/vmbr0/bridge/multicast_querier

#A link for DRBD (NICs are of 10 Gb/s):
auto bond401
iface bond401 inet static
    address  10.1.1.51
    netmask  255.255.255.0
    slaves   eth1 eth3
    bond_miimon 100
    bond_mode balance-rr
    mtu 9000

#Other link for DRBD (NICs are of 10 Gb/s):
auto bond402
iface bond402 inet static
    address  10.2.2.51
    netmask  255.255.255.0
    slaves   eth4 eth6
    bond_miimon 100
    bond_mode balance-rr
    mtu 9000

#Other link for DRBD (NICs are of 10 Gb/s):
auto bond403
iface bond403 inet static
    address  10.3.3.51
    netmask  255.255.255.0
    slaves   eth5 eth7
    bond_miimon 100
    bond_mode balance-rr
    mtu 9000

#A link for the NFS-Backups (NICs are of 1 Gb/s):
auto bond10
iface bond10 inet static
    address  10.100.100.51
    netmask  255.255.255.0
    slaves eth8 eth10
    bond_miimon 100
    bond_mode balance-rr
    #bond_mode active-backup
    mtu 9000