[pve-devel] internal dhcp server, where to put dhcp configuration ?

[Alexandre DERUMIER]

>>vmbr0 is connected to a physical interface, so that is IMHO impossible. 

Oh you are right

for nat, we can add another bridge.

example : proxmox vmbr0 = public ip adres
          vmbr1 = private addres: 192.168.0.1
          guests = private address : 192.168.0.2


same for routing, we need a second ip address




>>Please can you clearly define what routed mode is (still not understand)? 


For me,(like libvirt) routed mode is proxmox host is a router, routing between is external ip and bridge ip for example:



external hardware router(10.0.0.1)-------------->(10.0.0.2 eth0-vmbr0) proxmox host (192.168.0.1 - vmbr1)--------------->(192.168.0.2)GUESTVM



external router have a route : 192.168.0.0/24 gw 10.0.0.2
proxmox host default gateway : 10.0.0.1
guest vm default gw : 192.168.0.1


This is why I think that live migrate can't work, because outside router always have the same route to proxmox host.
(or you need to use a routing procotol like rip/ospf to reconfigure the outside router)
But I think that main usage is for some hosting provider like Heizer,ovh,.... so you don't have access to the hardware router.



----- Mail original ----- 

De: "Dietmar Maurer" <dietmar at proxmox.com> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: "pve.proxmox.com" <pve-devel at pve.proxmox.com> 
Envoyé: Dimanche 25 Août 2013 07:47:41 
Objet: RE: [pve-devel] internal dhcp server, where to put dhcp configuration ? 

> It's also possible that user use vmbr0 (with eth0 plugged) in nat mode or 
> routed mode. 
> (maybe this need some dhcp iptables filtering too) 

vmbr0 is connected to a physical interface, so that is IMHO impossible. 

Please can you clearly define what routed mode is (still not understand)?