[pve-devel] Feature HW Profiles

[Alexandre DERUMIER]

>>This template has no disk. And the Name base- was chosen by me while 
>>creating the VM. 
So,you have edited the vm conf file manually ?



>>I didn't know that i'm not allowed to choose this name 
>>for a normal VM. Bug? 

But you are not allowed to choose a name (gui or qm create), as proxmox create itself the disks with vm-<vmid>-disk-<diskid>


in RBDPlugin.pm
->rbd_ls()

 if ($line =~  m/^((vm|base)-(\d+)-disk-\d+)\s+(\d+)(M|G|T)\s((\S+)\/((vm|base)-\d+-\S+@\S+))?/) {

also

>parse_volname()
  if ($volname =~ m/^((base-(\d+)-\S+)\/)?((base)?(vm)?-(\d+)-\S+)$/) {



If you have edited manually the vm config file with custom name, I think qemu can start, 
but I'm not sure of the behaviour of proxmox when you add/remove/resize,... disk if the name is wrong.


----- Mail original ----- 

De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: pve-devel at pve.proxmox.com, "Dietmar Maurer" <dietmar at proxmox.com> 
Envoyé: Mardi 16 Avril 2013 13:28:36 
Objet: Re: [pve-devel] Feature HW Profiles 

This template has no disk. And the Name base- was chosen by me while 
creating the VM. I didn't know that i'm not allowed to choose this name 
for a normal VM. Bug? 

Stefan 

Am 16.04.2013 13:25, schrieb Alexandre DERUMIER: 
> "base-template-test" seem to be a non standard proxmox disk name... 
> 
> (should be base-166-disk-1) 
> 
> 
> ----- Mail original ----- 
> 
> De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
> À: "Alexandre DERUMIER" <aderumier at odiso.com> 
> Cc: pve-devel at pve.proxmox.com, "Dietmar Maurer" <dietmar at proxmox.com> 
> Envoyé: Mardi 16 Avril 2013 13:20:13 
> Objet: Re: [pve-devel] Feature HW Profiles 
> 
> Nothing happens: 
> 
> [ ~]# cat /etc/pve/qemu-server/166.conf 
> bootdisk: scsi0 
> cores: 2 
> localtime: 1 
> memory: 4096 
> name: base-template-test 
> net0: virtio=4A:2B:B0:82:F9:2A,bridge=vmbr0,rate=12.5 
> onboot: 1 
> ostype: l26 
> scsihw: virtio-scsi-pci 
> sockets: 1 
> [ ~]# qm template 166 
> [ ~]# cat /etc/pve/qemu-server/166.conf 
> bootdisk: scsi0 
> cores: 2 
> localtime: 1 
> memory: 4096 
> name: base-template-test 
> net0: virtio=4A:2B:B0:82:F9:2A,bridge=vmbr0,rate=12.5 
> onboot: 1 
> ostype: l26 
> scsihw: virtio-scsi-pci 
> sockets: 1 
> 
>> Am 16.04.2013 12:28, schrieb Alexandre DERUMIER: 
>>>>> Then i'll wait until these patches get integrated. Right now qemu-img 
>>>>> segfaults with rbd for me when trying to clone. 
>>> 
>>> Could you describe the problem ? I have tested it last month and it was working fine. 
>>> 
>>> (Just to be sure, you don't try to use qemu-img on a running vm, because it don't work) 
>>> 
>>> ----- Mail original ----- 
>>> 
>>> De: "Stefan Priebe - Profihost AG" <s.priebe at profihost.ag> 
>>> À: "Dietmar Maurer" <dietmar at proxmox.com> 
>>> Cc: pve-devel at pve.proxmox.com 
>>> Envoyé: Mardi 16 Avril 2013 11:04:39 
>>> Objet: Re: [pve-devel] Feature HW Profiles 
>>> 
>>> Hi, 
>>> Am 16.04.2013 10:58, schrieb Dietmar Maurer: 
>>>>>> VM templates will provide a way to do that (patches from Alexandre). 
>>>>> 
>>>>> Yes and no as the disk will be also cloned. I'm just speaking about the settings 
>>>>> like in OpenStack, OpenNebula and others. 
>>>> 
>>>> We can also allow to create templates without any disks. You can then add the disks when you clone. 
>>> 
>>> oh OK sorry. 
>>> 
>>> Then i'll wait until these patches get integrated. Right now qemu-img 
>>> segfaults with rbd for me when trying to clone. 
>>> 
>>> Thanks! 
>>> 
>>> Greets Stefan 
>>> 
>>> 
>>> _______________________________________________ 
>>> pve-devel mailing list 
>>> pve-devel at pve.proxmox.com 
>>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>>>