[pve-devel] report on bridge tests

[Alexandre DERUMIER]

Yes, I have also thinked about it , it's not simple ;)

Other way: openvswitch. If i have time, it'll do tests with openvz and openvswitch

(does openvz use tap devices on bridge ?)


----- Mail original ----- 

De: "Dietmar Maurer" <dietmar at proxmox.com> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: pve-devel at pve.proxmox.com 
Envoyé: Mercredi 14 Mars 2012 14:54:17 
Objet: RE: [pve-devel] report on bridge tests 

I am sure you can do it somehow, but it is very complicated in details. I thought about 
that half the night, and run from one problem into another. 

The other approach seems to be much simpler (from the configuration side). 

- Dietmar Maurer 

> -----Original Message----- 
> From: Alexandre DERUMIER [mailto:aderumier at odiso.com] 
> Sent: Mittwoch, 14. März 2012 14:44 
> To: Dietmar Maurer 
> Cc: pve-devel at pve.proxmox.com 
> Subject: Re: [pve-devel] report on bridge tests 
> 
> >> So where do you get that parameters from? 
> >> - what device to create the bridge on (eth0 in your example)? 
> Replace the current bridge= parameter in vm interface by interface=, or 
> something like that. 
> As interfaces names must be common to all hosts for migration, maybe some 
> interface alias name must be done somewhere. 
> 
> >> - what name do you use for the brigde (vlan2 in your example)? 
> use vlanX, take X from a vlan parameter from a new parameter in interface 
> config, ",vlan=XXX" 
> 
> ----- Mail original ----- 
> 
> De: "Dietmar Maurer" <dietmar at proxmox.com> 
> À: "Alexandre DERUMIER" <aderumier at odiso.com> 
> Cc: pve-devel at pve.proxmox.com 
> Envoyé: Mercredi 14 Mars 2012 14:26:25 
> Objet: RE: [pve-devel] report on bridge tests 
> 
> > Can we simply do at vm start 
> > 
> > for vlan2 by example 
> > --------------------- 
> > vconfig add eth0 2 
> > brctl addbr vlan2 
> > brtcl addif vlan2 eth0.2 
> 
> So where do you get that parameters from? 
> 
> - what device to create the bridge on (eth0 in your example)? 
> - what name do you use for the brigde (vlan2 in your example)? 
> 
> - Dietmar 
> 
> 
> 
> -- 
> 
> -- 
> 
> 
> 
> 
> Alexandre D erumier 
> Ingénieur Système 
> Fixe : 03 20 68 88 90 
> Fax : 03 20 68 90 81 
> 45 Bvd du Général Leclerc 59100 Roubaix - France 
> 12 rue Marivaux 75002 Paris - France 
> 




-- 

-- 




	Alexandre D erumier 
Ingénieur Système 
Fixe : 03 20 68 88 90 
Fax : 03 20 68 90 81 
45 Bvd du Général Leclerc 59100 Roubaix - France 
12 rue Marivaux 75002 Paris - France