[pve-devel] Baloon Device is the problem! Re: migration problems since qemu 1.3
Alexandre DERUMIER
aderumier at odiso.com
Mon Dec 24 15:48:44 CET 2012
does it work if you keep device virtio-balloon enabled,
but comment in qemuserver.pm
line 3005
vm_mon_cmd_nocheck($vmid, 'qom-set',
path => "machine/peripheral/balloon0",
property => "stats-polling-interval",
value => 2);
and
line2081
$qmpclient->queue_cmd($vmid, $ballooncb, 'query-balloon');
?
----- Mail original -----
De: "Alexandre DERUMIER" <aderumier at odiso.com>
À: "Stefan Priebe" <s.priebe at profihost.ag>
Cc: pve-devel at pve.proxmox.com
Envoyé: Lundi 24 Décembre 2012 15:38:13
Objet: Re: [pve-devel] Baloon Device is the problem! Re: migration problems since qemu 1.3
maybe it's related to qmp queries to balloon driver (for stats) during migration ?
----- Mail original -----
De: "Stefan Priebe" <s.priebe at profihost.ag>
À: "Dietmar Maurer" <dietmar at proxmox.com>
Cc: "Alexandre DERUMIER" <aderumier at odiso.com>, pve-devel at pve.proxmox.com
Envoyé: Lundi 24 Décembre 2012 15:32:52
Objet: Baloon Device is the problem! Re: [pve-devel] migration problems since qemu 1.3
Hello,
it works fine / again if / when i remove the baloon pci device.
If i remove this line everything is fine again!
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Greets
Stefan
Am 24.12.2012 15:05, schrieb Stefan Priebe:
>
> Am 24.12.2012 14:08, schrieb Dietmar Maurer:
>>> virtio0:
>>> cephkvmpool1:vm-105-disk-
>>> 1,iops_rd=215,iops_wr=155,mbps_rd=130,mbps_wr=90,size=20G
>>
>> Please can you also test without ceph?
>
> The same. I now also tried a debian netboot cd (6.0.5) but then 32bit
> doesn't work too. I had no disks attached at all.
>
> I filled the tmpfs ramdisk under /dev with
> dd if=/dev/urandom of=/dev/myfile bs=1M count=900
>
> Greets,
> Stefan
_______________________________________________
pve-devel mailing list
pve-devel at pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
More information about the pve-devel
mailing list