[pve-devel] Baloon Device is the problem! Re: migration problems since qemu 1.3

[Stefan Priebe]

Hello,

it works fine / again if / when i remove the baloon pci device.

If i remove this line everything is fine again!
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3

Greets
Stefan
Am 24.12.2012 15:05, schrieb Stefan Priebe:
>
> Am 24.12.2012 14:08, schrieb Dietmar Maurer:
>>> virtio0:
>>> cephkvmpool1:vm-105-disk-
>>> 1,iops_rd=215,iops_wr=155,mbps_rd=130,mbps_wr=90,size=20G
>>
>> Please can you also test without ceph?
>
> The same. I now also tried a debian netboot cd (6.0.5) but then 32bit
> doesn't work too. I had no disks attached at all.
>
> I filled the tmpfs ramdisk under /dev with
> dd if=/dev/urandom of=/dev/myfile bs=1M count=900
>
> Greets,
> Stefan