[pve-devel] [PATCH] add pci-bridge support and bump MAX_NET and MAX_VIRTIO to 32 devices

Dietmar Maurer dietmar at proxmox.com
Mon Aug 20 12:03:41 CEST 2012


Ok, will do

> -----Original Message-----
> From: Alexandre DERUMIER [mailto:aderumier at odiso.com]
> Sent: Montag, 20. August 2012 12:02
> To: Dietmar Maurer
> Cc: pve-devel at pve.proxmox.com
> Subject: Re: [pve-devel] [PATCH] add pci-bridge support and bump MAX_NET
> and MAX_VIRTIO to 32 devices
> 
> Oh, I don't have added yet the hotplug part.
> I was waiting that you commit this first.
> 
> 
> ----- Mail original -----
> 
> De: "Dietmar Maurer" <dietmar at proxmox.com>
> À: "Alexandre Derumier" <aderumier at odiso.com>, pve-
> devel at pve.proxmox.com
> Envoyé: Lundi 20 Août 2012 11:35:26
> Objet: RE: [pve-devel] [PATCH] add pci-bridge support and bump MAX_NET
> and MAX_VIRTIO to 32 devices
> 
> You simple call print_drivedevice_full() without bridges hash in
> vm_deviceplug()?
> 
> We do not need working hotplug, but we want at least some error message?
> 
> - Dietmar
> 
> > -----Original Message-----
> > From: pve-devel-bounces at pve.proxmox.com [mailto:pve-devel-
> > bounces at pve.proxmox.com] On Behalf Of Alexandre Derumier
> > Sent: Montag, 20. August 2012 11:10
> > To: pve-devel at pve.proxmox.com
> > Subject: [pve-devel] [PATCH] add pci-bridge support and bump MAX_NET
> > and MAX_VIRTIO to 32 devices
> >
> >
> > Signed-off-by: Alexandre Derumier <aderumier at odiso.com>
> > ---
> > PVE/QemuServer.pm | 132 +++++++++++++++++++++++++++++++++++++++-
> -
> > -----------
> > 1 files changed, 99 insertions(+), 33 deletions(-)
> >
> > diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm index
> > 21da506..0a9f522 100644
> > --- a/PVE/QemuServer.pm
> > +++ b/PVE/QemuServer.pm
> > @@ -402,10 +402,10 @@ while (my ($k, $v) = each %$confdesc) {
> >
> > my $MAX_IDE_DISKS = 4;
> > my $MAX_SCSI_DISKS = 14;
> > -my $MAX_VIRTIO_DISKS = 6;
> > +my $MAX_VIRTIO_DISKS = 32;
> > my $MAX_SATA_DISKS = 6;
> > my $MAX_USB_DEVICES = 5;
> > -my $MAX_NETS = 6;
> > +my $MAX_NETS = 32;
> > my $MAX_UNUSED_DISKS = 8;
> > my $MAX_HOSTPCI_DEVICES = 2;
> > my $MAX_SERIAL_PORTS = 4;
> > @@ -966,13 +966,13 @@ sub path_is_scsi { }
> >
> > sub print_drivedevice_full {
> > - my ($storecfg, $conf, $vmid, $drive) = @_;
> > + my ($storecfg, $conf, $vmid, $drive, $bridges) = @_;
> >
> > my $device = '';
> > my $maxdev = 0;
> >
> > if ($drive->{interface} eq 'virtio') {
> > - my $pciaddr = print_pci_addr("$drive->{interface}$drive->{index}");
> > + my $pciaddr = print_pci_addr("$drive->{interface}$drive->{index}",
> > +$bridges);
> > $device = "virtio-blk-pci,drive=drive-$drive->{interface}$drive-
> > >{index},id=$drive->{interface}$drive->{index}$pciaddr";
> > } elsif ($drive->{interface} eq 'scsi') { $maxdev = ($conf->{scsihw}
> > && $conf->{scsihw} ne 'lsi') ? 256 : 7; @@ -1053,7 +1053,7 @@ sub
> > print_drive_full { }
> >
> > sub print_netdevice_full {
> > - my ($vmid, $conf, $net, $netid) = @_;
> > + my ($vmid, $conf, $net, $netid, $bridges) = @_;
> >
> > my $bootorder = $conf->{boot} || $confdesc->{boot}->{default};
> >
> > @@ -1065,7 +1065,7 @@ sub print_netdevice_full { # qemu > 0.15 always
> > try to boot from network - we disable that by # not loading the pxe
> > rom file my $extra = ($bootorder !~ m/n/) ? "romfile=," : '';
> > - my $pciaddr = print_pci_addr("$netid");
> > + my $pciaddr = print_pci_addr("$netid", $bridges);
> > my $tmpstr = "$device,${extra}mac=$net-
> > >{macaddr},netdev=$netid$pciaddr,id=$netid";
> > $tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex} ;
> > return $tmpstr; @@ -2003,7 +2003,9 @@ sub config_to_command { my
> > ($storecfg, $vmid, $conf, $defaults, $migrate_uri) = @_;
> >
> > my $cmd = [];
> > + my $devices = [];
> > my $pciaddr = '';
> > + my $bridges = {};
> > my $kvmver = kvm_user_version();
> > my $vernum = 0; # unknown
> > if ($kvmver =~ m/^(\d+)\.(\d+)$/) { @@ -2041,15 +2043,15 @@ sub
> > config_to_command {
> > $use_usb2 = 1;
> > }
> > # include usb device config
> > - push @$cmd, '-readconfig', '/usr/share/qemu-server/pve-usb.cfg' if
> > $use_usb2;
> > + push @$devices, '-readconfig', '/usr/share/qemu-server/pve-usb.cfg'
> > + if $use_usb2;
> >
> > # enable absolute mouse coordinates (needed by vnc) my $tablet =
> > defined($conf->{tablet}) ? $conf->{tablet} : $defaults-
> > >{tablet};
> > if ($tablet) {
> > if ($use_usb2) {
> > - push @$cmd, '-device', 'usb-tablet,bus=ehci.0,port=6';
> > + push @$devices, '-device', 'usb-tablet,bus=ehci.0,port=6';
> > } else {
> > - push @$cmd, '-usbdevice', 'tablet';
> > + push @$devices, '-usbdevice', 'tablet';
> > }
> > }
> >
> > @@ -2057,8 +2059,8 @@ sub config_to_command { for (my $i = 0; $i <
> > $MAX_HOSTPCI_DEVICES; $i++) { my $d =
> > parse_hostpci($conf->{"hostpci$i"});
> > next if !$d;
> > - $pciaddr = print_pci_addr("hostpci$i");
> > - push @$cmd, '-device', "pci-assign,host=$d-
> > >{pciid},id=hostpci$i$pciaddr";
> > + $pciaddr = print_pci_addr("hostpci$i", $bridges);  push @$devices,
> > +'-device', "pci-assign,host=$d->{pciid},id=hostpci$i$pciaddr";
> > }
> >
> > # usb devices
> > @@ -2066,9 +2068,9 @@ sub config_to_command { my $d =
> > parse_usb_device($conf->{"usb$i"});
> > next if !$d;
> > if ($d->{vendorid} && $d->{productid}) {
> > - push @$cmd, '-device', "usb-host,vendorid=0x$d-
> > >{vendorid},productid=0x$d->{productid}";
> > + push @$devices, '-device',
> > +"usb-host,vendorid=0x$d->{vendorid},productid=0x$d->{productid}";
> > } elsif (defined($d->{hostbus}) && defined($d->{hostport})) {
> > - push @$cmd, '-device', "usb-host,hostbus=$d-
> > >{hostbus},hostport=$d->{hostport}";
> > + push @$devices, '-device',
> > +"usb-host,hostbus=$d->{hostbus},hostport=$d->{hostport}";
> > }
> > }
> >
> > @@ -2076,8 +2078,8 @@ sub config_to_command { for (my $i = 0; $i <
> > $MAX_SERIAL_PORTS; $i++) { if (my $path = $conf->{"serial$i"}) { die
> > "no such serial device\n" if ! -c $path;
> > - push @$cmd, '-chardev', "tty,id=serial$i,path=$path";
> > - push @$cmd, '-device', "isa-serial,chardev=serial$i";
> > + push @$devices, '-chardev', "tty,id=serial$i,path=$path"; push
> > + @$devices, '-device', "isa-serial,chardev=serial$i";
> > }
> > }
> >
> > @@ -2085,8 +2087,8 @@ sub config_to_command { for (my $i = 0; $i <
> > $MAX_PARALLEL_PORTS; $i++) { if (my $path = $conf->{"parallel$i"}) {
> > die "no such parallel device\n" if ! -c $path;
> > - push @$cmd, '-chardev', "parport,id=parallel$i,path=$path";
> > - push @$cmd, '-device', "isa-parallel,chardev=parallel$i";
> > + push @$devices, '-chardev', "parport,id=parallel$i,path=$path";
> > + push @$devices, '-device', "isa-parallel,chardev=parallel$i";
> > }
> > }
> >
> > @@ -2182,15 +2184,15 @@ sub config_to_command { #my $soundhw =
> > $conf->{soundhw} || $defaults->{soundhw}; #push @$cmd, '-soundhw',
> > 'es1370'; #push @$cmd, '-soundhw', $soundhw if $soundhw;
> > - $pciaddr = print_pci_addr("balloon0");
> > - push @$cmd, '-device', "virtio-balloon-pci,id=balloon0$pciaddr" if
> > $conf-
> > >{balloon};
> > + $pciaddr = print_pci_addr("balloon0", $bridges); push @$devices,
> > + '-device', "virtio-balloon-pci,id=balloon0$pciaddr"
> > + if $conf->{balloon};
> >
> > if ($conf->{watchdog}) {
> > my $wdopts = parse_watchdog($conf->{watchdog});
> > - $pciaddr = print_pci_addr("watchdog");
> > + $pciaddr = print_pci_addr("watchdog", $bridges);
> > my $watchdog = $wdopts->{model} || 'i6300esb';
> > - push @$cmd, '-device', "$watchdog$pciaddr";
> > - push @$cmd, '-watchdog-action', $wdopts->{action} if $wdopts-
> > >{action};
> > + push @$devices, '-device', "$watchdog$pciaddr";  push @$devices,
> > +'-watchdog-action', $wdopts->{action} if $wdopts->{action};
> > }
> >
> > my $vollist = [];
> > @@ -2223,20 +2225,20 @@ sub config_to_command {
> >
> > my $maxdev = ($scsihw ne 'lsi') ? 256 : 7; my $controller =
> > int($drive->{index} / $maxdev);
> > - $pciaddr = print_pci_addr("scsihw$controller");
> > - push @$cmd, '-device', "$scsihw,id=scsihw$controller$pciaddr" if
> > !$scsicontroller->{$controller};
> > + $pciaddr = print_pci_addr("scsihw$controller", $bridges);  push
> > +@$devices, '-device', "$scsihw,id=scsihw$controller$pciaddr"
> > +if !$scsicontroller->{$controller};
> > $scsicontroller->{$controller}=1;
> > }
> >
> > if ($drive->{interface} eq 'sata') {
> > my $controller = int($drive->{index} / $MAX_SATA_DISKS);
> > - $pciaddr = print_pci_addr("ahci$controller");
> > - push @$cmd, '-device',
> > "ahci,id=ahci$controller,multifunction=on$pciaddr" if
> > !$ahcicontroller-
> > >{$controller};
> > + $pciaddr = print_pci_addr("ahci$controller", $bridges); push
> > + @$devices, '-device',
> > + "ahci,id=ahci$controller,multifunction=on$pciaddr" if
> > + !$ahcicontroller->{$controller};
> > $ahcicontroller->{$controller}=1;
> > }
> >
> > - push @$cmd, '-drive',print_drive_full($storecfg, $vmid, $drive);
> > - push @$cmd, '-device',print_drivedevice_full($storecfg, $conf,
> > $vmid, $drive);
> > + push @$devices, '-drive',print_drive_full($storecfg, $vmid, $drive);
> > +push @$devices, '-device',print_drivedevice_full($storecfg, $conf,
> > +$vmid, $drive, $bridges);
> > });
> >
> > push @$cmd, '-m', $conf->{memory} || $defaults->{memory}; @@ -
> > 2254,10 +2256,16 @@ sub config_to_command { }
> >
> > my $netdevfull = print_netdev_full($vmid,$conf,$d,"net$i");
> > - push @$cmd, '-netdev', $netdevfull;
> > + push @$devices, '-netdev', $netdevfull;
> > +
> > + my $netdevicefull =
> > print_netdevice_full($vmid,$conf,$d,"net$i",$bridges);
> > + push @$devices, '-device', $netdevicefull; }
> >
> > - my $netdevicefull = print_netdevice_full($vmid,$conf,$d,"net$i");
> > - push @$cmd, '-device', $netdevicefull;
> > + #bridges
> > + while (my ($k, $v) = each %$bridges) {  $pciaddr =
> > +print_pci_addr("pci.$k");  unshift @$devices, '-device',
> > +"pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
> > }
> >
> >
> > @@ -2280,6 +2288,7 @@ sub config_to_command { push @$cmd, @$aa; }
> >
> > + push @$cmd, @$devices;
> > return wantarray ? ($cmd, $vollist) : $cmd; }
> >
> > @@ -3077,7 +3086,7 @@ sub pci_dev_bind_to_stub { }
> >
> > sub print_pci_addr {
> > - my ($id) = @_;
> > + my ($id, $bridges) = @_;
> >
> > my $res = '';
> > my $devices = {
> > @@ -3103,11 +3112,68 @@ sub print_pci_addr {
> > net4 => { bus => 0, addr => 22 },
> > net5 => { bus => 0, addr => 23 },
> > #addr29 : usb-host (pve-usb.cfg)
> > + 'pci.1' => { bus => 0, addr => 30 }, 'pci.2' => { bus => 0, addr =>
> > + 31 }, 'net6' => { bus => 1, addr => 1 }, 'net7' => { bus => 1, addr
> > + => 2 }, 'net8' => { bus => 1, addr => 3 }, 'net9' => { bus => 1,
> > + addr => 4 }, 'net10' => { bus => 1, addr => 5 }, 'net11' => { bus =>
> > + 1, addr => 6 }, 'net12' => { bus => 1, addr => 7 }, 'net13' => { bus
> > + => 1, addr => 8 }, 'net14' => { bus => 1, addr => 9 }, 'net15' => {
> > + bus => 1, addr => 10 }, 'net16' => { bus => 1, addr => 11 }, 'net17'
> > + => { bus => 1, addr => 12 }, 'net18' => { bus => 1, addr => 13 },
> > + 'net19' => { bus => 1, addr => 14 }, 'net20' => { bus => 1, addr =>
> > + 15 }, 'net21' => { bus => 1, addr => 16 }, 'net22' => { bus => 1,
> > + addr => 17 }, 'net23' => { bus => 1, addr => 18 }, 'net24' => { bus
> > + => 1, addr => 19 }, 'net25' => { bus => 1, addr => 20 }, 'net26' =>
> > + { bus => 1, addr => 21 }, 'net27' => { bus => 1, addr => 22 },
> > + 'net28' => { bus => 1, addr => 23 }, 'net29' => { bus => 1, addr =>
> > + 24 }, 'net30' => { bus => 1, addr => 25 }, 'net31' => { bus => 1,
> > + addr => 26 }, 'virtio6' => { bus => 2, addr => 1 }, 'virtio7' => {
> > + bus => 2, addr => 2 }, 'virtio8' => { bus => 2, addr => 3 },
> > + 'virtio9' => { bus => 2, addr => 4 }, 'virtio10' => { bus => 2, addr
> > + => 5 }, 'virtio11' => { bus => 2, addr => 6 }, 'virtio12' => { bus
> > + => 2, addr => 7 }, 'virtio13' => { bus => 2, addr => 8 }, 'virtio14'
> > + => { bus => 2, addr => 9 }, 'virtio15' => { bus => 2, addr => 10 },
> > + 'virtio16' => { bus => 2, addr => 11 }, 'virtio17' => { bus => 2,
> > + addr => 12 }, 'virtio18' => { bus => 2, addr => 13 }, 'virtio19' =>
> > + { bus => 2, addr => 14 }, 'virtio20' => { bus => 2, addr => 15 },
> > + 'virtio21' => { bus => 2, addr => 16 }, 'virtio22' => { bus => 2,
> > + addr => 17 }, 'virtio23' => { bus => 2, addr => 18 }, 'virtio24' =>
> > + { bus => 2, addr => 19 }, 'virtio25' => { bus => 2, addr => 20 },
> > + 'virtio26' => { bus => 2, addr => 21 }, 'virtio27' => { bus => 2,
> > + addr => 22 }, 'virtio28' => { bus => 2, addr => 23 }, 'virtio29' =>
> > + { bus => 2, addr => 24 }, 'virtio30' => { bus => 2, addr => 25 },
> > + 'virtio31' => { bus => 2, addr => 26 },
> > +
> > };
> >
> > if (defined($devices->{$id}->{bus}) &&
> > defined($devices->{$id}->{addr})) { my $addr = sprintf("0x%x",
> > $devices->{$id}->{addr});
> > - $res = ",bus=pci.$devices->{$id}->{bus},addr=$addr";
> > + my $bus = $devices->{$id}->{bus};
> > + $res = ",bus=pci.$bus,addr=$addr";
> > + $bridges->{$bus} = 1;
> > }
> > return $res;
> >
> > --
> > 1.7.2.5
> >
> > _______________________________________________
> > pve-devel mailing list
> > pve-devel at pve.proxmox.com
> > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
> 
> 
> 
> 
> 
> --
> 
> --
> 
> 
> 
> 
> 
> Alexandre D e rumier
> 
> Ingénieur Systèmes et Réseaux
> 
> 
> Fixe : 03 20 68 88 85
> 
> Fax : 03 20 68 90 88
> 
> 
> 45 Bvd du Général Leclerc 59100 Roubaix
> 12 rue Marivaux 75002 Paris
> 



More information about the pve-devel mailing list