[pve-devel] bnx2 driver crashing

[Alexandre DERUMIER]

so maybe debian and redhat add some patches to prevent it ? 

found this on redhat (a lot of patches) : 
[Broadcom 5.6 FEAT] Update bnx2 to 2.0.8+ 

https://bugzilla.redhat.com/show_bug.cgi?id=568601 

The following upstream patches have been applied to these rpms.
  1. netdev: Remove redundant checks for CAP_NET_ADMIN
  2. bnx2: avoid compiler errors
  3. bnx2: EEH is failing without timout
  4. bnx2: protect tx_timeout_reset with rtnl_lock()
  5. bnx2: dump some state during tx_timeout()
  6. bnx2: print warning when unable to allocate
  7. bnx2: read firmware version from VPD
  8. bnx2: update version to 2.0.3
  9. bnx2: Refine VPD logic
 10. bnx2: reset_task is crashing the kernel
 11. bnx2: Fix bnx2_netif_stop() merge error
 12. bnx2: Flush the register writes which setup the MSI-X
 13. bnx2: Refine statistics code
 14. bnx2: Save statistics during reset
 15. net: remove HAVE_ leftovers
 16. bnx2: Check BNX2_FLAG_USING_MSIX flag
 17. bnx2: Need to call cnic_setup_cnic_irq_info() after
 18. bnx2: Adjust flow control water marks
 19. bnx2: Allow for user-specific multiple advertisement speed
 20. bnx2: Fix bug when saving statistics
 21. bnx2: Update firmwares and update version to 2.0.8

To get the "2.0.8+" part, incorporate patches in RHEL6:
  1. bnx2: Fix netpoll crash
  2. bnx2: Use proper handler during netpoll
  3. bnx2: Update 5709 MIPS firmware mips = 5.0.0j15 rv2p = j10
  4. bnx2: Fix hang during rmmod bnx2
  5. bnx2: Always enable MSI-X on 5709


----- Mail original ----- 

De: "Dietmar Maurer" <dietmar at proxmox.com> 
À: "Alexandre DERUMIER" <aderumier at odiso.com>, pve-devel at pve.proxmox.com 
Envoyé: Dimanche 18 Septembre 2011 08:56:26 
Objet: RE: [pve-devel] bnx2 driver crashing 

> another user on the forum have add same bug with 2.6.32-4-pve (Is it also 
> redhat src based ?) 

no, it is not redhat based. But we use the bnx2 driver from Broadcom in both versions. 

> 
> http://forum.proxmox.com/threads/7012-FATAL!-BUG-in-bnx2-module-eth0- 
> got-disconnected 
> 
> Seem to be a problem with msi-x and bnx2 driver, I have see a lot of bugreport 
> with this problem on redhat and centos. 
> centos workaround is : # https://bugzilla.redhat.com/show_bug.cgi?id=432451 
> echo "options bnx2 disable_msi=1" > /etc/modprobe.d/bnx2 
> 
> I have add the options, I hope it'll correct the problem. 

Please report back if that helps, 

- Dietmar 
> 
> 
> 
> 
> -- 
> 
> -- 
> 
> 
> 
> 
> 
> Alexandre Derumier 
> Ingénieur système 
> e-mail : aderumier at odiso.com 
> Tél : +33 (0)3 20 68 88 90 
> Fax : +33 (0)3 20 68 90 81 
> 45 Bvd du Général Leclerc 
> 59100 ROUBAIX - FRANCE 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________ 
> pve-devel mailing list 
> pve-devel at pve.proxmox.com 
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 



-- 

-- 




	
	Alexandre Derumier 
Ingénieur système 
e-mail : aderumier at odiso.com 
Tél : +33 (0)3 20 68 88 90 
Fax : +33 (0)3 20 68 90 81 
45 Bvd du Général Leclerc 
59100 ROUBAIX - FRANCE 













-------------- next part --------------
A non-text attachment was scrubbed...
Name: aderumier.vcf
Type: text/x-vcard
Size: 183 bytes
Desc: not available
URL: <http://lists.proxmox.com/pipermail/pve-devel/attachments/20110918/78ace467/attachment.vcf>