[pve-devel] proxmox2: pve-kernel-2.6.32 : e1000e module loading error

Alexandre DERUMIER aderumier at odiso.com
Mon Oct 3 20:17:04 CEST 2011 

damn, it's works with kernel from repository .... 


dont't understand what's going wrong .... sorry for disturb you.... 



kvmtest:~# dmesg|grep e1000 
e1000e: Intel(R) PRO/1000 Network Driver - 1.6.2-NAPI 
e1000e: Copyright(c) 1999 - 2011 Intel Corporation. 
e1000e 0000:0c:00.0: Disabling ASPM L1 
e1000e 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
e1000e 0000:0c:00.0: setting latency timer to 64 
e1000e 0000:0c:00.0: irq 88 for MSI/MSI-X 
e1000e 0000:0c:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:80:29:e6 
e1000e 0000:0c:00.0: eth0: Intel(R) PRO/1000 Network Connection 
e1000e 0000:0c:00.0: eth0: MAC: 1, PHY: 4, PBA No: C57721-005 
e1000e 0000:0c:00.1: Disabling ASPM L1 
e1000e 0000:0c:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 
e1000e 0000:0c:00.1: setting latency timer to 64 
e1000e 0000:0c:00.1: irq 89 for MSI/MSI-X 
e1000e 0000:0c:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:80:29:e7 
e1000e 0000:0c:00.1: eth1: Intel(R) PRO/1000 Network Connection 
e1000e 0000:0c:00.1: eth1: MAC: 1, PHY: 4, PBA No: C57721-005 
e1000e 0000:0c:00.0: irq 88 for MSI/MSI-X 
e1000e 0000:0c:00.0: irq 88 for MSI/MSI-X 
e1000e 0000:0c:00.0: eth2: changing MTU from 1500 to 9000 
e1000e 0000:0c:00.1: irq 89 for MSI/MSI-X 
e1000e 0000:0c:00.1: irq 89 for MSI/MSI-X 
e1000e 0000:0c:00.1: eth3: changing MTU from 1500 to 9000 
e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx 
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx 
----- Mail original -----

De: "Dietmar Maurer" <dietmar at proxmox.com> 
À: "Alexandre DERUMIER" <aderumier at odiso.com> 
Cc: pve-devel at pve.proxmox.com 
Envoyé: Lundi 3 Octobre 2011 18:49:17 
Objet: RE: [pve-devel] proxmox2: pve-kernel-2.6.32 : e1000e module loading error 



Did you already test with the precompiled version? 




From: Alexandre DERUMIER [mailto:aderumier at odiso.com] 
Sent: Montag, 03. Oktober 2011 15:54 
To: Dietmar Maurer 
Cc: pve-devel at pve.proxmox.com 
Subject: Re: [pve-devel] proxmox2: pve-kernel-2.6.32 : e1000e module loading error 


sorry, this is e1000e card (intel PRO/1000 PT) 

kvmtest:~# modinfo e1000e 
filename: /lib/modules/2.6.32-6-pve/kernel/drivers/net/e1000e/e1000e.ko 
version: 1.6.2-NAPI 
license: GPL 
description: Intel(R) PRO/1000 Network Driver 
author: Intel Corporation, < linux.nics at intel.com > 
srcversion: E4B90BE4DC230817DCFB165 
alias: pci:v00008086d00001503sv*sd*bc*sc*i* 
alias: pci:v00008086d00001502sv*sd*bc*sc*i* 
alias: pci:v00008086d000010F0sv*sd*bc*sc*i* 
alias: pci:v00008086d000010EFsv*sd*bc*sc*i* 
alias: pci:v00008086d000010EBsv*sd*bc*sc*i* 
alias: pci:v00008086d000010EAsv*sd*bc*sc*i* 
alias: pci:v00008086d00001525sv*sd*bc*sc*i* 
alias: pci:v00008086d000010DFsv*sd*bc*sc*i* 
alias: pci:v00008086d000010DEsv*sd*bc*sc*i* 
alias: pci:v00008086d000010CEsv*sd*bc*sc*i* 
alias: pci:v00008086d000010CDsv*sd*bc*sc*i* 
alias: pci:v00008086d000010CCsv*sd*bc*sc*i* 
alias: pci:v00008086d000010CBsv*sd*bc*sc*i* 
alias: pci:v00008086d000010F5sv*sd*bc*sc*i* 
alias: pci:v00008086d000010BFsv*sd*bc*sc*i* 
alias: pci:v00008086d000010E5sv*sd*bc*sc*i* 
alias: pci:v00008086d0000294Csv*sd*bc*sc*i* 
alias: pci:v00008086d000010BDsv*sd*bc*sc*i* 
alias: pci:v00008086d000010C3sv*sd*bc*sc*i* 
alias: pci:v00008086d000010C2sv*sd*bc*sc*i* 
alias: pci:v00008086d000010C0sv*sd*bc*sc*i* 
alias: pci:v00008086d00001501sv*sd*bc*sc*i* 
alias: pci:v00008086d00001049sv*sd*bc*sc*i* 
alias: pci:v00008086d0000104Dsv*sd*bc*sc*i* 
alias: pci:v00008086d0000104Bsv*sd*bc*sc*i* 
alias: pci:v00008086d0000104Asv*sd*bc*sc*i* 
alias: pci:v00008086d000010C4sv*sd*bc*sc*i* 
alias: pci:v00008086d000010C5sv*sd*bc*sc*i* 
alias: pci:v00008086d0000104Csv*sd*bc*sc*i* 
alias: pci:v00008086d000010BBsv*sd*bc*sc*i* 
alias: pci:v00008086d00001098sv*sd*bc*sc*i* 
alias: pci:v00008086d000010BAsv*sd*bc*sc*i* 
alias: pci:v00008086d00001096sv*sd*bc*sc*i* 
alias: pci:v00008086d0000150Csv*sd*bc*sc*i* 
alias: pci:v00008086d000010F6sv*sd*bc*sc*i* 
alias: pci:v00008086d000010D3sv*sd*bc*sc*i* 
alias: pci:v00008086d0000109Asv*sd*bc*sc*i* 
alias: pci:v00008086d0000108Csv*sd*bc*sc*i* 
alias: pci:v00008086d0000108Bsv*sd*bc*sc*i* 
alias: pci:v00008086d0000107Fsv*sd*bc*sc*i* 
alias: pci:v00008086d0000107Esv*sd*bc*sc*i* 
alias: pci:v00008086d0000107Dsv*sd*bc*sc*i* 
alias: pci:v00008086d000010B9sv*sd*bc*sc*i* 
alias: pci:v00008086d000010D5sv*sd*bc*sc*i* 
alias: pci:v00008086d000010DAsv*sd*bc*sc*i* 
alias: pci:v00008086d000010D9sv*sd*bc*sc*i* 
alias: pci:v00008086d00001060sv*sd*bc*sc*i* 
alias: pci:v00008086d000010A5sv*sd*bc*sc*i* 
alias: pci:v00008086d000010BCsv*sd*bc*sc*i* 
alias: pci:v00008086d000010A4sv*sd*bc*sc*i* 
alias: pci:v00008086d0000105Fsv*sd*bc*sc*i* 
alias: pci:v00008086d0000105Esv*sd*bc*sc*i* 
depends: 
vermagic: 2.6.32-6-pve SMP mod_unload modversions 
parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) 
parm: TxIntDelay:Transmit Interrupt Delay (array of int) 
parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) 
parm: RxIntDelay:Receive Interrupt Delay (array of int) 
parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) 
parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) 
parm: IntMode:Interrupt Mode (array of int) 
parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) 
parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) 
parm: CrcStripping:Enable CRC Stripping, disable if your BMC needs the CRC (array of int) 
parm: EEE:Enable/disable on parts that support the feature (array of int) 
parm: Node:[ROUTING] Node to allocate memory on, default -1 (array of int) 


----- Mail original -----


De: "Dietmar Maurer" < dietmar at proxmox.com > 
À: "Alexandre DERUMIER" < aderumier at odiso.com > 
Cc: pve-devel at pve.proxmox.com 
Envoyé: Lundi 3 Octobre 2011 15:52:00 
Objet: RE: [pve-devel] proxmox2: pve-kernel-2.6.32 : e1000e module loading error 

> kvmtest:~# modinfo e1000 
> filename: /lib/modules/2.6.32-6-pve/kernel/drivers/net/e1000/e1000.ko 
> version: 7.3.21-k6-1-NAPI 

Why e1000? I though you talk about e1000e? 

Anyways, please can you test with the precompiled kernel from: 

http://download1.proxmox.com/debian/dists/squeeze/pve/binary-amd64/ 

- Dietmar 



-- 




-- 




	
	Alexandre Derumier 
Ingénieur système 
e-mail : aderumier at odiso.com 
Tél : +33 (0)3 20 68 88 90 
Fax : +33 (0)3 20 68 90 81 
45 Bvd du Général Leclerc 
59100 ROUBAIX - FRANCE 













-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.proxmox.com/pipermail/pve-devel/attachments/20111003/f46b01f3/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: aderumier.vcf
Type: text/x-vcard
Size: 183 bytes
Desc: not available
URL: <http://lists.proxmox.com/pipermail/pve-devel/attachments/20111003/f46b01f3/attachment.vcf>

More information about the pve-devel mailing list