[pbs-devel] [PATCH proxmox-backup] tape: changer: sg_pt: make extra scsi request for dvcid
Dominik Csapak
d.csapak at proxmox.com
Thu Jul 15 13:07:20 CEST 2021
some libraries cannot handle a request with volume tags and DVCID set at
the same time.
So we make 2 separate requests and merge them, since we want to keep
the vendor/model/serial data.
to not overcomplicate the code, add another special type to ElementType
Signed-off-by: Dominik Csapak <d.csapak at proxmox.com>
---
src/tape/changer/sg_pt_changer.rs | 54 ++++++++++++++++++++++++-------
1 file changed, 43 insertions(+), 11 deletions(-)
diff --git a/src/tape/changer/sg_pt_changer.rs b/src/tape/changer/sg_pt_changer.rs
index 66da140d..f4154ced 100644
--- a/src/tape/changer/sg_pt_changer.rs
+++ b/src/tape/changer/sg_pt_changer.rs
@@ -265,13 +265,34 @@ pub fn transfer_medium<F: AsRawFd>(
Ok(())
}
-#[repr(u8)]
#[derive(Clone, Copy)]
enum ElementType {
- MediumTransport = 1,
- Storage = 2,
- ImportExport = 3,
- DataTransfer = 4,
+ MediumTransport,
+ Storage,
+ ImportExport,
+ DataTransfer,
+ DataTransferWithDVCID,
+}
+
+impl ElementType {
+ fn byte1(&self) -> u8 {
+ let volume_tag_bit = 1u8 << 4;
+ match *self {
+ ElementType::MediumTransport => volume_tag_bit | 1,
+ ElementType::Storage => volume_tag_bit | 2,
+ ElementType::ImportExport => volume_tag_bit | 3,
+ ElementType::DataTransfer => volume_tag_bit | 4,
+ // some changers cannot get voltag + dvcid at the same time
+ ElementType::DataTransferWithDVCID => 4,
+ }
+ }
+
+ fn byte6(&self) -> u8 {
+ match *self {
+ ElementType::DataTransferWithDVCID => 0b001, // Mixed=0,CurData=0,DVCID=1
+ _ => 0b000, // Mixed=0,CurData=0,DVCID=0
+ }
+ }
}
fn scsi_read_element_status_cdb(
@@ -283,15 +304,11 @@ fn scsi_read_element_status_cdb(
let mut cmd = Vec::new();
cmd.push(0xB8); // READ ELEMENT STATUS (B8h)
- cmd.push(1u8<<4 | (element_type as u8)); // volume tags and given type
+ cmd.push(element_type.byte1());
cmd.extend(&start_element_address.to_be_bytes());
cmd.extend(&number_of_elements.to_be_bytes());
- let byte6 = match element_type {
- ElementType::DataTransfer => 0b001, // Mixed=0,CurData=0,DVCID=1
- _ => 0b000, // Mixed=0,CurData=0,DVCID=0
- };
- cmd.push(byte6);
+ cmd.push(element_type.byte6());
cmd.extend(&allocation_len.to_be_bytes()[1..4]);
cmd.push(0);
cmd.push(0);
@@ -385,6 +402,21 @@ pub fn read_element_status<F: AsRawFd>(file: &mut F) -> Result<MtxStatus, Error>
let page = get_element(&inquiry, &mut sg_raw, ElementType::DataTransfer, allocation_len, false)?;
drives.extend(page.drives);
+ // get the serial + vendor + model,
+ // some changer require this to be an extra scsi command
+ let page = get_element(&inquiry, &mut sg_raw, ElementType::DataTransferWithDVCID, allocation_len, false)?;
+ // should be in same order and same count, but be on the safe side.
+ // there should not be too many drives normally
+ for drive in drives.iter_mut() {
+ for drive2 in &page.drives {
+ if drive2.element_address == drive.element_address {
+ drive.vendor = drive2.vendor.clone();
+ drive.model = drive2.model.clone();
+ drive.drive_serial_number = drive2.drive_serial_number.clone();
+ }
+ }
+ }
+
let page = get_element(&inquiry, &mut sg_raw, ElementType::MediumTransport, allocation_len, false)?;
transports.extend(page.transports);
--
2.30.2
More information about the pbs-devel
mailing list