<p dir="ltr"></p>
<p dir="ltr">Hello,<br></p>
<p dir="ltr">I believe there is a bug in Ver. 3.3. Creating an OVS Bridge does not add the line "allow-ovs vmbrX". For vmbr1 I had to manually add the line after which it works perfectly, am certain the same would be true for vmbr2. Although this is an easy work around it does sort of defeat the purpose of the GUI. You will notice in the attached screenshot it actually removes the line "-allow-ovs vmbr1".<br></p>
<p dir="ltr">Thank you<br></p>
<p dir="ltr">Sincerely,</p>
<p dir="ltr">Usama<br></p>
<p dir="ltr">working config manually entered in network/interfaces and system rebooted</p>
<blockquote><blockquote><p dir="ltr">cat /etc/network/interfaces<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"># network interface settings<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">auto lo<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface lo inet loopback<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">auto vmbr1<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">allow-ovs vmbr1<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface vmbr1 inet static<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> address 192.168.0.90<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> netmask 255.255.255.0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> gateway 192.168.0.200<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_type OVSBridge<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_ports eth0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> <br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">allow-vmbr1 eth0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> iface eth0 inet manual<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_bridge vmbr1<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_type OVSPort<br>
</p>
</blockquote>
</blockquote>
<p dir="ltr"></p>
<p dir="ltr">Proposed config after adding another OVS Bridge from GUI</p>
<p dir="ltr"> </p>
<blockquote><blockquote><p dir="ltr">cat /etc/network/interfaces.new <br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"># network interface settings<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">auto lo<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface lo inet loopback<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">allow-vmbr1 eth0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface eth0 inet manual<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_type OVSPort<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_bridge vmbr1<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">auto vmbr1<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface vmbr1 inet static<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> address 192.168.0.90<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> netmask 255.255.255.0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> gateway 192.168.0.200<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_type OVSBridge<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_ports eth0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface vmbr0 inet manual<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> bridge_ports none<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> bridge_stp off<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> bridge_fd 0<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr">iface vmbr2 inet manual<br>
</p>
</blockquote>
</blockquote>
<blockquote><p dir="ltr"><br>
</p>
</blockquote>
<blockquote><blockquote><p dir="ltr"> ovs_type OVSBridge<br>
</p>
</blockquote>
</blockquote>
<p dir="ltr"></p>