<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-2">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hello,<br>
<br>
i have GigastorATX - iscsi storage. It has 8x1Gbps ports and 16
slots for sata disks. I want to have 2 proxmox HA server (3 nodes=1
for quorum, 2 HA). On 2 HA servers iscsi storage with shared LVM. <br>
<br>
My test was: setup ethernets, switch, setup gigastor iscsi storage,
add trough web interface iscsi storage, no direct lun, prox1 and 2
servers, connect. (it generate configs in /etc/open-iscsi/...) iscsi
is connected running, but gigastor report errors (bellow). Remove
from web interface, configure iscsiadm, connect on both servers, all
ok, but is not defined iscsi storage on web interface
(/etc/pve/storage). Add iscsi storage to web interface, gigastor
report errors again. <br>
<br>
With defined iscsi in web interface and <i>/etc/iscsi.d/open-iscsi
stop</i> does not stop error reports - just disconnect from iscsi.
But prox still try open tcp socket to iscsi without open-iscsi
running, how it is possible?<br>
<br>
It looks like proxmox is connecting to storage trough some direct
command? How can i fix error reports, do not define iscsi in web
interface, only lvm?<br>
<br>
10.2.2.2 - storage<br>
10.2.2.201 - server 1<br>
<br>
<b><br>
</b>Cycling errors on iscsi storage (10s timeout), socket number is
increasing (sample is socket 262):<br>
<b>OPEN</b>:<br>
<i>Category:</i><i><br>
</i><i>iSCSI</i><i><br>
</i><i>Severity:</i><i><br>
</i><i>Info</i><i><br>
</i><i>EventID:</i><i><br>
</i><i>Open Socket Request</i><i><br>
</i><i>Source:</i><i><br>
</i><i>ICS</i><i><br>
</i><i>Summary:</i><i><br>
</i><i>Target 10.2.2.2:3260, Initiator 10.2.2.201:44780, Socket 262</i><i><br>
</i><i> </i><i><br>
</i><i>Sequence ID</i><i><br>
</i><i>827</i><i><br>
</i><i>Socket</i><i><br>
</i><i>262</i><i><br>
</i><i>Target TCP Port</i><i><br>
</i><i>3260</i><i><br>
</i><i>Target IP Address</i><i><br>
</i><i>10.2.2.2</i><i><br>
</i><i>Initiator TCP Port</i><i><br>
</i><i>44780</i><i><br>
</i><i>Initiator IP Address</i><i><br>
</i><i>10.2.2.201</i><i><br>
</i><br>
<b>ERROR:</b><br>
<i>Category:</i><i><br>
</i><i>Network</i><i><br>
</i><i>Severity:</i><i><br>
</i><i>Warning</i><i><br>
</i><i>EventID:</i><i><br>
</i><i>TCP TxIscsiCloseInd</i><i><br>
</i><i>Source:</i><i><br>
</i><i>AWR</i><i><br>
</i><i>Summary:</i><i><br>
</i><i>Skt:262::10.2.2.201:44780.0xaeec::10.2.2.2: Tx Close Indi. to
iSCSI</i><i><br>
</i><i> </i><i><br>
</i><i>Sequence ID</i><i><br>
</i><i>828</i><i><br>
</i><i><br>
</i><i>Skt:262::10.2.2.201:44780.0xaeec::10.2.2.2: Tx Close Indi. to
iSCSI</i><i><br>
</i><i>0000</i><i><br>
</i><i>07 00 01 06 00 00 00 00 00 00 00 00 00 00 00 00
........|........</i><br>
<br>
<b>CLOSE:</b><br>
Category:<br>
iSCSI<br>
Severity:<br>
Warning<br>
EventID:<br>
Close Socket<br>
Source:<br>
ICS<br>
Summary:<br>
TCP FIN, Socket 262<br>
<br>
Sequence ID<br>
829<br>
Socket<br>
262<br>
Target TCP Port<br>
3260<br>
Target IP Address<br>
10.2.2.2<br>
Initiator TCP Port<br>
44780<br>
Initiator IP Address<br>
10.2.2.201<br>
Close Reason<br>
TCP FIN<br>
<br>
Thanks for any help,<br>
Martin Krpata<br>
Czech Republic<br>
</body>
</html>